Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

							– 91–
MULTI CUE menu
This menu is displayed by pressing the following key:MULTI CUE
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							MULTI CUE menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
1
For designating the cue
number 1 and page.
2
For designating the cue
number 2 and page.
3
For designating the cue
number 3 and page.
4
For designating the cue
number 4 and page.
5
For designating the cue
number 5 and page.
PROTECT
For designating protection
on a page by page basis.
——
SET UP 
6
For designating the cue
number 6 and page.
7
For designating the cue
number 7 and page.
8
For designating the cue
number 8 and page.
9
For designating the cue
number 9 and page.
10
For designating the cue
number 10 and page.
Description
Designates the cue number for registering the cue point.
When the key is pressed together with the F key, the page for
registering the point is also designated.
This function is executed by pressing this key together with the F
key.
ON:Sets the displayed page to the protected status. Cue
points on this page cannot be registered, changed or
cleared.
OFF:Releases the protected status of the page displayed. Cue
points on this page can be registered, changed or cleared.
Transfers to the MULTI CUE SET UP menu screen.
Designates the cue number for registering the cue point.
When the key is pressed together with the F key, the page for
registering the point is also designated.
– 92 – 
						

							– 93 –
MULTI CUE menu
∑Switching the pages
≥A particular page can be selected by pressing one of the F1 (1) through F5 (5) or F9 (6) through
F13 (10) keys together with the F key.
≥The pages are scrolled up when the F key and “1” key are pressed together.
≥The pages are scrolled down when the F key and “2” key are pressed together.
If an attempt is made to scroll down from page 1, page 10 will be displayed.
If an attempt is made to scroll up from page 10, page 1 will be displayed.
∑Protecting pages
When the F6 (PROTECT) key and F key are pressed together, the protected status is set for the
page displayed.
When the F6 key and F key are pressed together again, the protected status is released.
Once protected, the number of the page is displayed as follows:
Protected status Protection released status
∑Entering cues
Up to a hundred cue points can be entered.
(1) Select the number of the cue point to be entered.
Press one of the F1 through F5 or F9 through F13 keys. The number corresponding to the
pressed key appears in reverse video.
(2) Input the time code.
There are three ways of inputting the time code.
1) Use the search dial to search the cue point, and press the ENTRY button.
2) Input the time code directly using the number keys, and press the ENT key.
3) Move the cursor to the section where the value can be captured.
1. Press the FROM key.
1. The time code of the cursor position is captured in the scratchpad register.
2. Increment or decrement the number using the “i,” “j” and number keys.
3. Press the ENT key.
1. The result of the operation is now displayed.
4PA G EF
1PA G E1PA G E
00 44 07 04FROM
SPR DATA
3
00 44 07 07
SPR DATA
ENT 
						

							MULTI CUE menu
4. Move the cursor to the section where the captured time code is to be displayed.
5. Press the COPY key to call the captured time code.
5. The cue data is now entered.
≥The position of the next cue number automatically appears in reverse video when the F1
(AUTO STEP) key on the MULTI CUE SET UP menu has been set to ON.
≥An entered cue point remains in the memory even when the power is turned off.
∑Changing cue points
Proceed as follows to change an already entered cue point.
(1) Press the key (F1–F5, F9–F13) corresponding to the cue to be entered.
(2) Press the cursor keys to move the column cursor to the time code of the cue point to be
changed.
(3) Press the center cursor key to change the cursor to the column cursor, and then input the
value using the number keys.
(4) Press the ENT key.
∑Clearing cue data
Proceed as follows to clear an already entered cue point.
(1) Press the key (F1–F5, F9–F13) corresponding to the cue to be cleared.
(2) Press the C key.
(3) Press the ENT key.
∑Clearing all the cue points
Press the F8 (SET UP) key, and then press the F3 (PAG CLR) on the SET UP menu and F key
together. All the cue points on the page concerned are now cleared. To clear all the cue points
on all the pages (with the exception of the cue points on protected pages), press the F5 (ALL
CLR) and F key together.Center cursor key
Center cursor key
Cursor key
4:::
400:44:07:07COPY
400:44:07:07
00440704
400:44:07:04
– 94–
Cursor key 
						

							– 95–
MULTI CUE SET UP menu
This menu is displayed by pressing the following keys:)F8MULTI CUE
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 96–
MULTI CUE SET UP menu
Key
F1
F2
F3
F4
F5
F6–F7
F8
F9
F10
F11
F12
F13
Key designation
AUTO STEP
For setting the auto step
mode.
PAG MODE
For setting the cursor
movement mode.
PAG CLR
For clearing cue data on a
page.
——
ALL CLR
For clearing all the cue
data.
——
EXIT
CLUTCH
For setting the dial clutch
in the VAR mode.
MAX SP.
For setting the maximum
tape speed in the VAR
mode.
AUTO FRZ°
For setting the freeze
frame output in the VAR
mode.
——
CUE ROLL
For setting the preroll time.
Description
ON:Moves the cursor to the next item automatically when a
cue point is registered.
OFF
:Cursor is not moved. 
≥When F2 (PAG MODE) below is at ON, the cursor moves only
on the page.
≥For example, upon completion of registration of cue point
number 10, the cursor moves to the time code input site of cue
number 1 on the same page.
≥When F2 (PAG MODE) below is at OFF, the cursor moves
between two pages. 
≥For example, upon completion of registration of cue point
number 10, the cursor moves to the time code input site of cue
number 1 on the next page.
ON:Cursor moves only on the same page.
OFF
:Cursor moves between two pages.
All the cue data on a page is cleared.
This function is executed when the key is pressed together with
the F key.
≥Data on a protected page is not cleared.
All the cue data is cleared.
This function is executed when the key is pressed together with
the F key.
≥Data on a protected page is not cleared.
Returns the VTR to the MULTI CUE menu screen.
ON:Sets the clutch to the j1a, 0a, i1a or i2a speed.
OFF
:The clutch is not set.
s1r2:Tape speed in the range of j1 to i2
s1r1:Tape speed in the range of j1 to i1
0r1:Tape speed in the range of 0 to i1
ON:A freeze frame is output when the EXECUTE button is
pressed during variable mode. (Tape running continues.)
The setting is released when the STOP, PLAY, FF, REW,
JOG, VAR or SHTL button is pressed. 
OFF:A freeze frame is not output.
Sets the preroll time.
Preroll time can be set in 1-second steps from 0 to 30 sec.
°This item is operational on the MULTI CUE menu screen. 
						

							– 97–
INSERT/ASSEMBLE MANUAL EDIT menu
Press the  (or  )>keys to display the MANUAL EDIT menu.F12INSERTASSEM
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1–F7
F8
F9
F10–F11
F12
F13
Key designation
——
SET UP
INSERT/ASSEMBLE
For setting the editing
mode ON/OFF.
——
AUTO EDIT
CH SELECT
For selecting the editing
channel.
Description
Transfers the VTR to the MANUAL EDIT SET UP menu screen.
Selects the editing mode.
ON:Sets the editing mode to ON.
OFF:Sets the editing mode to OFF.
Transfers the VTR to the AUTO EDIT menu screen.
Transfers the VTR to the INSERT MANUAL EDIT CH SELECT
(editing channel selection) menu screen (but only for insert
editing). 
						

							– 98–
INSERT MANUAL EDIT CH SELECT menu
This menu is displayed by pressing the following keys:>>F13F12INSERT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
°CH-5 to CH-8 are not displayed when PCM audio has been set to the 4-channel format. 
						

							– 99–
INSERT MANUAL EDIT CH SELECT menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13 
Key designation
VIDEO
For selecting the video
channel ON/OFF.
CH-1
For selecting the audio
CH1 ON/OFF.
CH-2
For selecting the audio
CH2 ON/OFF.
CH-3
For selecting the audio
CH3 ON/OFF.
CH-4
For selecting the audio
CH4 ON/OFF.
CUE
For selecting the cue
channel ON/OFF.
TC
For selecting the LTC time
code channel ON/OFF.
SET UP
CH-5
For selecting the audio
CH5 ON/OFF.
CH-6
For selecting the audio
CH6 ON/OFF.
CH-7
For selecting the audio
CH7 ON/OFF.
CH-8
For selecting the audio
CH8 ON/OFF.
CH SELECT
Description
For selecting the editing channel.
Valid only for insert editing.
ON:Selected as the editing channel.
OFF
:Not selected as the editing channel.
≥In the case of insert editing with selection of digital audio
channel only, be sure to continue with a stabilized input video
signal. 
≥If the input video signal is distorted, audio might not be
recorded properly.
Transfers the VTR to the MANUAL EDIT SET UP menu screen. 
For selecting the editing channel.
Valid only for insert editing.
ON:Selected as the editing channel.
OFF
:Not selected as the editing channel.
≥In the case of insert editing with selection of digital audio
channel only, be sure to continue with a stabilized input video
signal. 
≥If the input video signal is distorted, audio might not be
recorded properly.
Transfers the VTR to the INSERT MANUAL EDIT menu screen. 
						

							– 100 –
INSERT/ASSEMBLE MANUAL EDIT SET UP menu
Press the  (or  )>keys to change to the MANUAL EDIT menu, then press the  key
to display this menu.
OR
Press the >keys to display this menu.
F2SET UP
F8F12INSERTASSEM
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1