Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

							– 31–
VIDEO OUT SD menu
Key
F1
F2
F3
F4
F5–F6
F7
F8–F9
F10
F11
F12
F13
Key designation
Y
For adjusting the Y level.
PB
For adjusting the P
Blevel.
PR
For adjusting the P
Rlevel.
BLACK.L
For adjusting the black
level.
——
HD
——
CONVERT
CMPST
SDI
——
Description 
j¶ to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with the F key.
j¶ to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with the F key.
j¶ to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with the F key.
n100 mV
Transfers the VTR to the VIDEO OUT HD menu screen.
Transfers the VTR to the VIDEO OUT CONVERT menu screen.
Transfers the VTR to the VIDEO OUT SD SET UP COMPOSITE
menu screen.
Transfers the VTR to the VIDEO OUT SD SET UP SDI menu
screen. 
						

							– 32–
VIDEO OUT SD SET UP COMPOSITE menu
This menu is displayed by pressing the following keys:>>F11F9VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
B.CLIP
OFF 
						

							– 33–
VIDEO OUT SD SET UP COMPOSITE menu
Key
F1
F2
F3–F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
COMB FIL°
For controlling the comb
filter.
B. CLIP
——
SYS SC
For adjusting the system
subcarrier.
SYS H
For adjusting the system H
phase.
INTERP.
Interpolation
EXIT
——
7.5%STUP
For adding 7.5% setup to
the composite output.
LINE BLK
STATE
——
Description 
Selects whether the analog composite output signals are to be
passed through the comb filter. However, when the F1 (COMB
FIL) key on the VIDEO OUT SD SET UP SDI menu has been set
to ON, the analog composite output will also be set to ON
regardless of which setting is selected for this menu item.
ON
:The signals are passed through the filter and output.
OFF:The signals are not passed through the filter.
This is used to select whether signals below the SD output
pedestal level are to be clipped or not.
OFF
:The signals are not clipped.
ON:The signals are clipped.
Adjusts the system subcarrier of the composite output. 
(j180 to i180)
When this key is pressed together with the F key, the white-on-
black display (VAR MODE) is established, and the system
subcarrier can be adjusted using the ADJUST control.
Adjusts the system H phase of the composite output.
Adjusts the system H phase of the composite output.
When this key is pressed together with the F key, the white-on-
black display (VAR MODE) is established, and the system H
phase can be adjusted using the ADJUST control.
The system H phase is adjusted in sample increments. n0.5H
j858 to i858 (with 480/59.94i format)
j864 to i864 (with 576/50i format)
Initiates vertical interpolation during AT playback to reduce the
vertical movement of the playback images.
AUTO
:Automatically initiates interpolation in the JOG or VAR
mode.
OFF:No interpolation.
Returns the VTR to the VIDEO OUT SD menu screen.
Selects whether to add 7.5% setup to the composite output.
(This setting takes effect with NTSC output signals only; This
setting is not displayed with PAL output signals.)
ON:7.5% setup is added.
OFF:7.5% setup is not added.
For transferring to the video output line blanking menu. 
NTSC:Lines 10 to 21.
PAL:Lines 8 to 22.
Transfers the VTR to the VIDEO OUT SD SET UP CMPST
STATE menu screen.
° This item does not appear with the 1080/50i, 625/50i, 1080/25psf and 1080/25p system formats. (PAL output sig-
nals are not passed through the filter.) 
						

							– 34–
VIDEO OUT SD SET UP CMPST STATE menu
This menu is displayed by pressing the following keys: (or [AUDIO OUT])>>
OR
>>(or )>
F12F12F11F9VIDEO OUT
F12F8VIDEO OUT
Description
NORMAL:The standard mode is established (E-E through
mode is turned OFF).
THROUGH:The E-E through mode (AV minimum delay mode)
is established.
°A discrepancy occurs between the video (audio) output and time
code output in the E-E through mode.
Transfers the VTR to the VIDEO OUT SD SET UP CMPST
menu screen.
Key
F1
F2
F3–F7
F8
F9–F13
Key designation
——
EE_MODE
——
EXIT
——
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 35–
VIDEO OUT SD SET UP CMPST STATE menu
∑Selecting the TAPE/EE output signals
The video, audio and cue signals which are output during the VTR’s operation are switched on
this menu to TAPE or EE signals.
(1) Press the center cursor key to display the cursor.
(2) Move the cursor to the desired position using the cursor keys.
°The cursor will not move to places which cannot be set.
(3) Press the center cursor key to select TAPE or EE.
Refer to the following table for the types of setting options.Center cursor key
Cursor key
≥When a setting is to be established during head selection using the TEST menu or during edit-
ing, the setting applying to the operation concerned takes precedence over the setting select-
ed using the VIDEO OUT SET UP STATE menu.
≥When TAPE/EE has been set by F1 (OUTPUT) on the HOME menu, the HOME menu setting
takes precedence.
(Underline denotes the factory setting mode.)
Mode
CH
VIDEO
D.AUDIO
CUE
EJECT
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
STBY
OFF
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
TENSION
RELEASE
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
STBY
ON
TAPE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
REC
TAPE
EE1
EE2
TAPE
EE1
EE2
EE
EDIT
REC
TAPE
EE1
TAPE
EE1
EE
JOG/
VAR
TAPE
TAPE
MUTE
TAPE
SHTL
TAPE
TAPE
MUTE
TAPE 
						

							– 36 –
VIDEO OUT SD SET UP SDI menu
This menu is displayed by pressing the following keys:))F12F9VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
B.CLIP
OFF 
						

							– 37–
VIDEO OUT SD SET UP SDI menu
°This item does not appear when 525p (480/59p) is set for the SD SDI output.  Similarly, it does not appear when
1080/50i, 625/50i, 1080/25psf or 1080/25p is the system format.  (The output signals are not passed through the
comb filter.)
Key
F1
F2
F3–F4
F5
F6
F7
F8
F9–F10
F11
F12
F13
Key designation
COMB FIL°
B. CLIP
——
SERIAL SYS PHASE
INTERP.
Interpolation
EXIT 
——
LINE BLK
STATE 
——
Description
For selecting whether to pass the SD output (both of SDI output
and analog composite output) signals through the comb filter.
ON:The signals are passed through the comb filter and output.
OFF:The signals are not passed through the comb filter.
This is used to select whether signals below the SD output
pedestal level are to be clipped or not.
OFF
:The signals are not clipped.
ON:The signals are clipped.
Adjusts the sync phase of SD_SDI output in relation to the
reference signal.
FINE/COARSE
≥This can be selected when the function key is pressed together
with the F key.
With the 480/59.94i format:Adjustment can be made from
j2H-858 to i1Hi858.
With the 480/59.94p format:Adjustment can be made from
j857 to +858.
With the 576/50i format:Adjustment can be made from
j2H-864 to i1Hi864.
For FINE
, adjustments are made in sample increments; for
COARSE, they are made in H increments.
Initiates vertical interpolation during AT playback to reduce the
vertical movement of the playback images.
AUTO
:Automatically initiates interpolation in the JOG or VAR
mode.
OFF:No interpolation.
Returns the VTR to the VIDEO OUT SD  menu screen.
For transferring to the video output line blanking menu.
NTSC:Lines 10 to 21.
PAL:Lines 8 to 22.
Transfers the VTR to the VIDEO OUT SD SET UP SDI STATE
menu screen. 
						

							– 38–
VIDEO OUT SET UP LINE BLK (video output line blanking) menu
This menu is displayed by pressing the following keys:))(or )).F11F12F11F9VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1–F7
F8
F9
F10
F11
F12–F13
Key designation
——
EXIT
ALL ON
ALL OFF
LINE BLK
——
Description
Returns the VTR to the VIDEO OUT SD SET UP menu screen.
When this key is pressed together with the F key, all the lines are
blanked.
When this key is pressed together with the F key, all the lines are
non-blanked.
Refer to the “Setting the line blanking” (on the next page). 
						

							– 39–
VIDEO OUT SET UP LINE BLK (video output line blanking) menu
∑Setting the line blanking
The blanking lines in the vertical blanking period can be set in 1-line increments.
(1) Press the center cursor key.
The cursor now appears.
(2) Move the cursor and select the lines to be blanked.
(3) Press the center cursor key to select ON or OFF for the display.
ON:The lines are blanked.
OFF:The non-blanking status is established, and no lines are selected.
(4) Press the ENT key.
The blanking is now entered.
(5) To return to the previous screen, press the F8 (EXIT) key.
Center cursor key
Cursor key
OFF
ON 
						

							– 40–
VIDEO OUT SD SET UP SDI STATE menu
This menu is displayed by pressing the following keys: (or  )))
OR
))(or )).
F12F12F11F9VIDEO OUT
F12F8AUDIO OUTVIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1
F2
F3–F7
F8
F9–F13
Key designation
——
EE_MODE
——
EXIT
——
Description
NORMAL:The standard mode is established (E-E through
mode is turned OFF).
THROUGH:The E-E through mode (AV minimum delay mode)
is established.
°A discrepancy occurs between the video (audio) output and time
code output in the E-E through mode.
Transfers the VTR to the VIDEO OUT SD SET UP SDI menu
screen.