Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions

71
DISPLAY page
Notes
•  Perform the setting for the camera numbers and the
camera titles on the VIDEO page of the encoder.
•  Click the [SET] button to save the changed settings.
Otherwise, the changed settings will not be saved.
■Item Descriptions
CAMERA No. DISPLAY
Select "ON" or "OFF" to display, or not display, the
camera number and the camera title on the monitor.
ON:The camera number and the camera title will be
displayed at either the top or the bottom of
monitor according to the...

72
SETTINGS MENUS OF THE DECODER
CHARACTER BACKGROUND COLOR
Select how to display the background of the
characters displayed on the monitor from the
following.
NONE:The characters displayed on the monitor will
be displayed without background color.
GRAY:The characters displayed on the monitor will
be displayed in a gray color background.
The default setting is "NONE".
DATE DISPLAY
Select "TYPE A" or "TYPE B" to display the camera
number, the camera title and the time on the top...

73
NETWORK page
Note:It is necessary to restart the decoder to save the
changed settings. Otherwise, the changed settings
will not be saved. Restarting the decoder can be
done on the MAINTENANCE page. Click the
[MAINTENANCE] button in the left column to go to
the MAINTENANCE page and click the [RESTART]
button on the MAINTENANCE page. It will take
around 2minutes for the decoder to become operable
after the restart.
■Item Descriptions
Perform the following settings after referring to a network...

74
SETTINGS MENUS OF THE DECODER
SYSTEM page
Notes
•The Main CPU mode is the advanced function for
integrated control. There is no product on the market
as of June 2003.
•Click the [SET] button to save the changed settings.
Otherwise, the changed settings will not be saved.
■Item Descriptions
MODE
The "MODE" will be decided according to the system
environment.
When there is no Main CPU controlling the encoder
and the decoder, select "WEB MODE (NO MAIN
CPU EXISTS).
When there is a Main CPU...

75
match the current time by referring to an NTP server
through a network.
Select "ON" or "OFF" to set whether to use the NTP
or not.
When "ON" is selected, it is also necessary to set the
following 4 items:
•NTP SERVER HOST/IP ADDRESS
•INTERVAL (1 - 24 hour)
•TIME ZONE
•DAYLIGHT SAVINGS
NTP SERVER HOST/IP ADDRESS
Enter a host name or an IP address of an NTP
server.
When a host name is entered, it is necessary to
enter the IP address of the DNS server in the "DNS
SERVER"...

76
SETTINGS MENUS OF THE DECODER
USER page
Perform the setting to restrict users to access the
decoder on this page.
It is possible to restrict access to the decoder by the
"USER RESTRICTION" and the "HOST
AUTHENTICATION".
Refer to the next page when using both the "USER
RESTRICTION" and the "HOST AUTHENTICATION".
Notes
•The following user (administrator) is registered as
default setting.
USER NAME: admin
PASSWORD: none (blank)
ACCESS LEVEL: 1 (ADMINISTRATOR)
•It is...

77
HOST page
Perform the setting to restrict hosts (IP addresses) to
access the decoder on this page.
It is possible to restrict access to the decoder by the
"USER RESTRICTION" and the "HOST
AUTHENTICATION".
Notes:
•Click the [SET] button to save the changed settings.
Otherwise, the changed settings will not be saved.
•When using both the "USER AUTHENTICATION"
and the "HOST AUTHENTICATION", access to the
encoder will be restricted as below.
■Item Descriptions
●HOST...

78
SETTINGS MENUS OF THE DECODER
[ADD] button
Click to add a host after entering the host
information.
●DELETE
Select a host to be deleted from the pull-down menu,
and click the [DELETE] button.
Confirm that the host has been deleted from the pull-
down menu. 

79
MAINTENANCE page
It is possible to update the firmware of the decoder or
restart the decoder.
■Item Descriptions
FIRMWARE UPDATE
Update the firmware of the decoder by executing the
update files sent to the decoder in advance.
Refer to the following for more information about the
firmware update.
RESTART
Click the [RESTART] button to restart the decoder. It
will take around 2 minutes for the decoder to become
operable after the [RESTART] button is clicked.
During restart, it is impossible to operate...

80
•The power cord, connectors or the power plug are
damaged.
If you continue to use it, a fire or an electric shock
may occur.
Unplug the power plug immediately, and refer
servicing of the plug to qualified service personnel.
TROUBLESHOOTING
Before asking for repairs, please check the following symptoms.
If the solutions below do not solve the problem or the symptom is not listed below, ask at the shop where you purchased
the appliances.
SymptomPossible cause / Possible solutionReference page
The power...