Home > Panasonic > TV Receiver > Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions

Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions

Here you can view all the pages of manual Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions. The Panasonic manuals for TV Receiver are available online for free. You can easily download all the documents as PDF.

Page 111

111
UPDATING
Update the firmware of the encoder/decoder by executing the update file transferred to the encoder/decoder in advance.
Refer to the page 62 or page 79 to transfer the file to the encoder or the decoder respectively.
■Format
●Updating the encoder
●Updating the decoder
■Response
■Important Notice
The user name and the password authentication will be required when trying to update the firmware of the
encoder/decoder. Enter a user name with access level 1 (ADMINISTRATOR) and the password...

Page 112

112
ENCODER
Setting Page Item Default setting
NETWORK IP ADDRESS 192.168.0.10
SUBNET MASK 255.255.255.0
DEFAULT GATEWAY 192.168.0.1
DNS SERVER 0.0.0.0
SPEED/DUPLEX AUTO
SYSTEM MODE WEB MODE
VIDEO&AUDIO ENCRYPTION OFF
ENCRYPTION KEY (4 digits: 0 - 9) 0000
NTP OFF
NTP SERVER HOST/IP ADDRESS -
INTERVAL 24
TIME ZONE (GMT-05:00) Eastern Standard Time
DAYLIGHT SAVINGS ON
DATE [YYYY/MM/DD] 2003/01/01
DATE [hh:mm:ss] 00:00:00
DEVICE NAME WJ-GXE900
LOCATION -
CONTACT -
SNMP COMMUNITY public
START UP COMMAND*...

Page 113

113
Setting Page Item Default setting
AUDIO SETUP OFF OFF OFF OFF
ALARM-DRY CONTACT No.1 No. 2 No.3 No.4
MAKE-CONTACT CLOSE CLOSE CLOSE CLOSE
CAMERA PRESET No. (1 - 64)
Blank for all the camera input channels (No preset control)
BIT RATE Refer to "The bit rate when the encoder detects an 
alarm (both the dry contact and camera site alarm)" 
on the next page.
RESET/TIMER (SEC)
TIMER 10 sec TIMER 10 sec TIMER 10 sec TIMER 10 sec
1 - 60, 90, 120, 150, 180, 240, 300 - 3600: 
60SEC INTERVAL...

Page 114

114
Setting Page Item Default setting
HOST HOST AUTHENTICATION  OFF
HOST IP ADDRESS -
SUBNET MASK -
ACCESS LEVEL -
DELETE -
MAINTENANCEACCEPT EXCLUSIVE COMMAND IP ADDRESS-
The bit rate when the encoder detects an alarm (both the dry contact and camera site alarm)
No. Camera input channel Default setting
119.216 Mbps (150 ms)
2NO CHANGE
3 NO CHANGE
4 NO CHANGE
21NO CHANGE
2  9.216 Mbps (150 ms)
3 NO CHANGE
4 NO CHANGE
31NO CHANGE
2 NO CHANGE
3  9.216 Mbps (150 ms)
4 NO CHANGE
41NO CHANGE
2 NO CHANGE
3 NO...

Page 115

115
DECODER
Setting Page Item Default setting
NETWORK IP ADDRESS 192.168.0.11
SUBNET MASK 255.255.255.0
DEFAULT GATEWAY 192.168.0.1
DNS SERVER 0.0.0.0
SPEED/DUPLEX AUTO
SYSTEM MODE WEB MODE
VIDEO&AUDIO DECRYPTION OFF
DECRYPTION KEY (4 digits: 0 - 9) 0000
NTP OFF
NTP SERVER HOST/IP ADDRESS -
INTERVAL 24
TIME ZONE (GMT-05:00) Eastern Standard Time
DAYLIGHT SAVINGS ON
DATE [YYYY/MM/DD] 2003/01/01
DATE [hh:mm:ss] 00:00:00
DEVICE NAME WJ-GXD900
LOCATION -
CONTACT -
SNMP COMMUNITY public
START UP COMMAND*...

Page 116

SPECIFICATIONS
ENCODER
Basic Specification
Power Source 120 V AC 60 Hz
Power Consumption 23 W
Ambient Operating Temperature–10 °C - +50 °C (14 °F - 122 °F) * See note.
Ambient Operating Humidity Less than 90% (non-condensing)
Weight  Approx. 2.9 kg (6.4 lbs.)
Dimensions 210 mm (W) x 44 mm (H) x 300 mm (D)
[8-1/4 (W) x 1-3/4 (H) x 11-13/16 (D)] (Rubber feet excluded)
*Note:The performance is not guaranteed until the inside temperature rises up to 0°C (32 °F).
Input/Output
Video Input 1.0 V[p-p]/75...

Page 117

DECODER
Basic Specification
Power Source 120 V AC 60 Hz
Power Consumption 45 W
Ambient Operating Temperature–10 °C - +50 °C (14 °F - 122 °F) * See note.
Ambient Operating Humidity Less than 90 % (no-condensing)
Weight  Approx. 4.8 kg (10.6 lbs.)
Dimensions 420 mm (W) x 44 mm (H) x 350 mm (D) 
[16-9/16 (W) x 1-3/4  (H) x 13-3/4 (D)] (Rubber feet excluded)
*Note:The performance is not guaranteed until the inside temperature rises up to 0°C (32 °F).
Input/Output
Video Output 1.0 V[p-p]/75 Ω, NTSC Composite...

Page 118

118 

Page 119

PANASONIC CANADA INC.5770 Ambler Drive, Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, 
P.R. 00985 (809)750-4300
Panasonic Digital Communications & Security CompanyUnit of Matsushita Electric Corporation of AmericaSecurity Systems Groupwww.panasonic.com/cctvExecutive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094Zone Office
Eastern:One Panasonic...
Start reading Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions

Related Manuals for Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions

All Panasonic manuals