Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions
Have a look at the manual Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
111 UPDATING Update the firmware of the encoder/decoder by executing the update file transferred to the encoder/decoder in advance. Refer to the page 62 or page 79 to transfer the file to the encoder or the decoder respectively. ■Format ●Updating the encoder ●Updating the decoder ■Response ■Important Notice The user name and the password authentication will be required when trying to update the firmware of the encoder/decoder. Enter a user name with access level 1 (ADMINISTRATOR) and the password registered to the encoder/decoder to be updated. HTTP /1.1 200 OK CR LF Cache-Control: no-cache CR LF Content-Type: text/plain CR LF Content-Length: XX CR LF(XX: Display the octet number of the Message-Body decimally) CR LF http://(IP address of the decoder)/cgi-bin/decoder.cgi?com=netvup&submit=START http://(IP address of the encoder)/cgi-bin/encoder.cgi?com=netvup&submit=START
112 ENCODER Setting Page Item Default setting NETWORK IP ADDRESS 192.168.0.10 SUBNET MASK 255.255.255.0 DEFAULT GATEWAY 192.168.0.1 DNS SERVER 0.0.0.0 SPEED/DUPLEX AUTO SYSTEM MODE WEB MODE VIDEO&AUDIO ENCRYPTION OFF ENCRYPTION KEY (4 digits: 0 - 9) 0000 NTP OFF NTP SERVER HOST/IP ADDRESS - INTERVAL 24 TIME ZONE (GMT-05:00) Eastern Standard Time DAYLIGHT SAVINGS ON DATE [YYYY/MM/DD] 2003/01/01 DATE [hh:mm:ss] 00:00:00 DEVICE NAME WJ-GXE900 LOCATION - CONTACT - SNMP COMMUNITY public START UP COMMAND* MULTICAST DESTINATION IP ADDRESS* 239.192.255.1 MULTICAST IP ADDRESS FOR SETUP*239.192.255.2 MULTICAST PORT* 51203 CH1 CH2 CH3 CH4 VIDEO CAMERA No. 1 2 3 4 CAMERA TITLE 1 2 3 4 (WITHIN 16 CHARACTERS) DESTINATION IP ADDRESS 239.192.10.1 239.192.10.2 239.192.10.3 239.192.10.4 DESTINATION PORT No. 50000 50000 50000 50000 SOURCE PORT No. 51000 51000 51000 51000 BIT RATE 6.14 Mbps 6.14 Mbps 6.14 Mbps 6.14 Mbps (150 ms) (150 ms) (150 ms) (150 ms) TOS BIT 0 0 0 0 TTL 16 16 16 16 ENCODER START UP SETUP START START START START CAMERA CABLE COMPENSATION S S S S DYNANIC RANGE NORMAL NORMAL NORMAL NORMAL WATERMARK OFF OFF OFF OFF GOP 15 15 15 15 *: Valid only when "MAIN CPU MODE (MAIN CPU EXISTS)" is selected for "MODE" on the SYSTEM page of the encoder. DEFAULT SETTINGS
113 Setting Page Item Default setting AUDIO SETUP OFF OFF OFF OFF ALARM-DRY CONTACT No.1 No. 2 No.3 No.4 MAKE-CONTACT CLOSE CLOSE CLOSE CLOSE CAMERA PRESET No. (1 - 64) Blank for all the camera input channels (No preset control) BIT RATE Refer to "The bit rate when the encoder detects an alarm (both the dry contact and camera site alarm)" on the next page. RESET/TIMER (SEC) TIMER 10 sec TIMER 10 sec TIMER 10 sec TIMER 10 sec 1 - 60, 90, 120, 150, 180, 240, 300 - 3600: 60SEC INTERVAL ALARM-CAMERA SITE No.1 No. 2 No.3 No.4 ON/OFF ON ON ON ON CAMERA PRESET No. (1 - 64) Blank for all the camera input channels (No preset control) BIT RATE Refer to "The bit rate when the encoder detects an alarm (both the dry contact and camera site alarm)" on the next page. RESET/TIMER (SEC) TIMER 10 sec TIMER 10 sec TIMER 10 sec TIMER 10 sec 2 - 60, 90, 120, 150, 180, 240, 300 - 3600: 60SEC INTERVAL ALARM-VIDEO LOSS No.1 No. 2 No.3 No.4 ON/OFF ON ON ON ON CAMERA PRESET No. (1 - 64) Blank for all the camera input channels (No preset control) BIT RATE "NO CHANGE" for all the camea input channels. RESET/TIMER (SEC) TIMER 10 sec TIMER 10 sec TIMER 10 sec TIMER 10 sec 1 - 60, 90, 120, 150, 180, 240, 300 - 3600: 60SEC INTERVAL ALARM ALARM NOTIFICATION ADDRESS 0.0.0.0 ALARM NOTIFICATION PORT 51456 RS-485 DATA PORT BAUD RATE 9 600 bps DATA 8 BIT STOP BIT 1 BIT PARITY NONE WAITING DATA SIZE TO SEND PACKET200 (1 - 1024) byte WAITING TIMER TO SEND PACKET 100 (10 - 1000ms) DESTINATION SETUP DESTINATION IP ADDRESS IN RECEIVING PACKET DESTINATION IP ADDRESS 0.0.0.0 DESTINATION PORT No. 0 RECEIVING PORT No. 52000 USER USER AUTHENTICATION OFF USER NAME admin PASSWORD - ACCESS LEVEL 1 DELETE admin [1]
114 Setting Page Item Default setting HOST HOST AUTHENTICATION OFF HOST IP ADDRESS - SUBNET MASK - ACCESS LEVEL - DELETE - MAINTENANCEACCEPT EXCLUSIVE COMMAND IP ADDRESS- The bit rate when the encoder detects an alarm (both the dry contact and camera site alarm) No. Camera input channel Default setting 119.216 Mbps (150 ms) 2NO CHANGE 3 NO CHANGE 4 NO CHANGE 21NO CHANGE 2 9.216 Mbps (150 ms) 3 NO CHANGE 4 NO CHANGE 31NO CHANGE 2 NO CHANGE 3 9.216 Mbps (150 ms) 4 NO CHANGE 41NO CHANGE 2 NO CHANGE 3 NO CHANGE 4 9.216 Mbps (150 ms)
115 DECODER Setting Page Item Default setting NETWORK IP ADDRESS 192.168.0.11 SUBNET MASK 255.255.255.0 DEFAULT GATEWAY 192.168.0.1 DNS SERVER 0.0.0.0 SPEED/DUPLEX AUTO SYSTEM MODE WEB MODE VIDEO&AUDIO DECRYPTION OFF DECRYPTION KEY (4 digits: 0 - 9) 0000 NTP OFF NTP SERVER HOST/IP ADDRESS - INTERVAL 24 TIME ZONE (GMT-05:00) Eastern Standard Time DAYLIGHT SAVINGS ON DATE [YYYY/MM/DD] 2003/01/01 DATE [hh:mm:ss] 00:00:00 DEVICE NAME WJ-GXD900 LOCATION - CONTACT - SNMP COMMUNITY public START UP COMMAND* MULTICAST DESTINATION IP ADDRESS* 239.192.255.1 MULTICAST IP ADDRESS FOR SETUP*239.192.255.2 MULTICAST PORT* 51203 CH1 CH2 CH3 CH4 VIDEO UNICAST/MULTICAST MULTICAST MULTICAST MULTICAST MULTICAST RECEIVING IP ADDRESS239.192.10.1 239.192.10.2 239.192.10.3 239.192.10.4 RECEIVING PORT No. 50000 50000 50000 50000 LATENCY BUFFER NONE NONE NONE NONE DECODER START UP SETUP START START START START DISPLAY CAMERA No. DISPLAY ON ON ON ON CAMERA TITLE DISPLAY ON ON ON ON DATE DISPLAY ON ON ON ON DISPLAY POSITION TYPE A TYPE A TYPE A TYPE A CHARACTER SIZE BIG BIG BIG BIG CHARACTOR BACKGROUND COLORNONE NONE NONE NONE DATE DISPLAY MMM.DD.YY hh:mm:ss TIME DISPLAY 12 HOUR USER USER AUTHENTICATION OFF USER NAME admin PASSWORD - ACCESS LEVEL 1 DELETE admin[1] HOST HOST AUTHENTICATION OFF HOST IP ADDRESS - SUBNET MASK - ACCESS LEVEL - DELETE - *: Valid only when "MAIN CPU MODE (MAIN CPU EXISTS)" is selected for "MODE" on the SYSTEM page of the decoder.
SPECIFICATIONS ENCODER Basic Specification Power Source 120 V AC 60 Hz Power Consumption 23 W Ambient Operating Temperature–10 °C - +50 °C (14 °F - 122 °F) * See note. Ambient Operating Humidity Less than 90% (non-condensing) Weight Approx. 2.9 kg (6.4 lbs.) Dimensions 210 mm (W) x 44 mm (H) x 300 mm (D) [8-1/4 (W) x 1-3/4 (H) x 11-13/16 (D)] (Rubber feet excluded) *Note:The performance is not guaranteed until the inside temperature rises up to 0°C (32 °F). Input/Output Video Input 1.0 V[p-p]/75 Ω(Multiplex control signal), NTSC Composite, BNC (x4) Video Output 1.0 V[p-p]/75 Ω, NTSC Composite D-sub 9pin (x4) Audio Input–10 dBv, more than 10 kΩ, Unbalanced, D-sub 9pin (x4) Video Compression Method MPEG2-TS, SP@ML Audio Compression Method Dolby Digital® Resolutions 720 x 480 pixels max. (Effective pixels: 704 x 480) Frame Rate 30 fps Bit Rate 1.5 Mbps, 3.0 Mbps, 3.8 Mbps, 4.6 Mbps, 6.1 Mbps, 9.2 Mbps Serial Port RS-485, four-wire system, RJ-11, Termination resistor ON/OFF switch, 4 800 bps, 9 600 bps, 19 200 bps Alarm Input Dry contact, Terminal (x4) Trigger Output Open Collector output, Terminal (x4) Reset Input Current loop or dry contact, Terminal (x1) Network Interface Network Interface 100BASE-TX, RJ-45 Compatible Network Protocols IP, ICMP, IGMP v2, BOOTP, TCP, UDP, HTTP, RTP, SNMP, NTP, FTP, DHCP Security measures Password authentication, Encryption of video and audio data (Hardware) Standard Accessories •Simple Mounting Bracket for a Container Box ..........................................4 •Fixing Screw for Simple Mounting Bracket (M3x6) ...................................8 •Code Label (on which the MAC address is written) ..................................1 •Description Label 1....................................................................................1 •Description Label 2....................................................................................1 •CD-ROM....................................................................................................1 •Quick Reference Guide .............................................................................1 •Warranty ....................................................................................................1 116
DECODER Basic Specification Power Source 120 V AC 60 Hz Power Consumption 45 W Ambient Operating Temperature–10 °C - +50 °C (14 °F - 122 °F) * See note. Ambient Operating Humidity Less than 90 % (no-condensing) Weight Approx. 4.8 kg (10.6 lbs.) Dimensions 420 mm (W) x 44 mm (H) x 350 mm (D) [16-9/16 (W) x 1-3/4 (H) x 13-3/4 (D)] (Rubber feet excluded) *Note:The performance is not guaranteed until the inside temperature rises up to 0°C (32 °F). Input/Output Video Output 1.0 V[p-p]/75 Ω, NTSC Composite BNC (x4) Quad 1.0 V[p-p]/75 Ω, NTSC Composite, BNC (x1) Audio Output–10 dBv, 10 kΩ, Unbalanced, RCA (x4) Audio Mixing output–10 dBv, 10 kΩ, Unbalanced, RCA (x1) Video Compression Method MPEG2-TS, SP@ML Audio Compression Method Dolby Digital® Resolutions 720 x 480 pixels max. (Effective pixels: 704 x 480) Frame Rate 30 fps Bit Rate 1.5 Mbps, 3.0 Mbps, 3.8 Mbps, 4.6 Mbps, 6.1 Mbps, 9.2 Mbps Serial Port RS-232C, D-sub 9pin, Only for maintenance Reset Input Current loop or dry contact, Terminal (x1) Network Interface Network Interface 100BASE-TX, 1000BASE-T, RJ-45 Compatible Network Protocols IP, ICMP, IGMP v2, BOOTP, TCP, UDP, HTTP, RTP, SNMP, NTP, FTP, DHCP Security measures Password authentication, Decryption of video data/audio mixing (Hardware) Standard Accessories •Rack Mounting Bracket .............................................................................2 •Fixing Screws for Rack Mounting Bracket (M5x12) ..................................4 •Mounting Screws (M3x8)...........................................................................6 •Code Label (on which the MAC address is written) ..................................1 •Description Label.......................................................................................1 •CD-ROM....................................................................................................1 •Quick Reference Guide .............................................................................1 •Warranty ....................................................................................................1 117
PANASONIC CANADA INC.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 (809)750-4300 Panasonic Digital Communications & Security CompanyUnit of Matsushita Electric Corporation of AmericaSecurity Systems Groupwww.panasonic.com/cctvExecutive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094Zone Office Eastern:One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303Central:1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205Western:6550 Katella Ave., Cypress, CA 90630 (714) 373-7840 2003 © Matsushita Electric Industrial Co., Ltd. All rights reser\ ved. N0603-3074 3TR001669 DAB Printed in Japan