Panasonic Mpeg2 Encoder Wj Gxe900 Operating Instructions

51
CGI RESET
Resets the alarm using the CGI commands.
Refer to "RESETTING THE ALARM/DISPLAYING
THE ALARM STATUS" of the "HOW TO USE THE
CGI COMMANDS" section on page 102.
TIMER
The timer starts when the alarm is detected. When
the entered time for this setting has passed, the
alarm will be reset automatically. Select the time
(seconds) from the following.
1 - 60 (a second step), 90, 120, 150, 180, 240, 300 -
3 600 (60 seconds interval)
Notes:
•When an alarm with the same alarm type and...

52
ALARM-VIDEO LOSS page
Note:Click the [SET] button to save the changed
settings. Otherwise, the changed settings will not be
saved.
■Item Descriptions
No.
The numbers of the VIDEO IN connectors
ON/OFF
Set whether to control the encoder by alarm input or
not.
ON
When the video loss alarm is detected, the following
actions will be performed at the same time.
•Notification of an alarm occurrence to the
destination set on the ALARM page
•Camera is controlled by a preset number
•Changing of the bit rate...

53
RESET/TIMER (SEC) 1 - 60, 90, 120, 150, 180, 240,
300 - 3 600: 60 SEC INTERVAL
When the alarm is reset, the bit rate returns to the
set value on the VIDEO page and the alarm status is
released. 
Select the method of release from the following.
CGI RESET
Resets the alarm using the CGI commands.
Refer to "RESETTING THE ALARM/DISPLAYING
THE ALARM STATUS" of the "HOW TO USE THE
CGI COMMANDS" section on page 102.
TIMER
The timer starts when the alarm is detected. When
the entered time for...

54
RS-485 DATA PORT page
Perform the settings to send and receive serial data
duplex. The setting values should be the same for both
devices.
Notes
•Packets will be sent to a network when either setting
of "WAITING DATA SIZE TO SEND PACKET" or
"WAITING TIMER TO SEND PACKET" is fulfilled.
•When "PREFERENCE SETUP" is selected for
"DESTINATION SETUP", packets will be set to only
one destination.
•The encoder cannot receive fragmented UDP
packets correctly. 
•Click the [SET]...

55
NETWORK PORT SETUP
DESTINATION SETUP
Perform the settings for the destination which
receives the packets.
Select "DESTINATION IP ADDRESS IN RECEIVING
PACKET" or "REFERENCE SETUP
(FOLLOWINGS)".
DESTINATION IP ADDRESS IN RECEIVING
PACKET
Serial data will be sent to the IP address contained in
the received packet. Therefore, the destination IP
address will not be decided until receiving the
packet, and it is impossible to send the received
serial data from the RS-485 data port to the...

56
NETWORK page
Note:It is necessary to restart the encoder to save the
changed settings. Otherwise, the changed settings
will not be saved. Restarting the encoder can be
done on the MAINTENANCE page. Click the
[MAINTENANCE] button in the left column to go to
the MAINTENANCE page and click the [RESTART]
button on the MAINTENANCE page. It will take
around 2 minutes and 45 seconds for the encoder to
become operable after the restart.
■Item Descriptions
Perform the following settings after referring to a...

57
SYSTEM page
Notes
•The Main CPU mode is the advanced function for
integrated control. There is no product on the market
as of June 2003.
•Click the [SET] button to save the changed settings.
Otherwise, the changed settings will not be saved.
■Item Descriptions
MODE
The "MODE" will be decided according to the system
environment.
When there is no Main CPU controlling the encoder
and the decoder, select "WEB MODE (NO MAIN
CPU EXISTS).
When there is a Main CPU controlling the encoder
and the...

58
SETTINGS MENUS OF THE ENCODER
When "ON" is selected, it is also necessary to set the
following 4 items:
•NTP SERVER HOST/IP ADDRESS
•INTERVAL (1 - 24 hour)
•TIME ZONE
•DAYLIGHT SAVINGS
NTP SERVER HOST/IP ADDRESS
Enter a host name or an IP address of an NTP
server.
When a host name is entered, it is necessary to
enter the IP address of the DNS server in the "DNS
SERVER" input box on the NETWORK page.
Otherwise, the NTP will not function.
There is no default setting.
PORT No.
Displays...

59
USER page
Perform the settings to restrict users to access the
encoder on this page.
It is possible to restrict access to the encoder by the
"USER AUTHENTICATION" and the "HOST
AUTHENTICATION".
Refer to the next page when using both the "USER
AUTHENTICATION" and the "HOST
AUTHENTICATION".
Notes
•The following user (administrator) is registered as
default setting.
USER NAME: admin
PASSWORD: none (blank)
ACCESS LEVEL: 1 (ADMINISTRATOR)
•It is impossible to delete the user...

60
SETTINGS MENUS OF THE ENCODER
HOST page
Perform the settings on this page when restricting
devices from accessing the encoder by using IP
addresses.
It is possible to restrict access to the encoder by the
"USER AUTHENTICATION" and the "HOST
AUTHENTICATION".
Notes:
•Click the [SET] button to save the changed settings.
Otherwise, the changed settings will not be saved.
•When using both the "USER AUTHENTICATION"
and the "HOST AUTHENTICATION", access to the
encoder will be...