Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions

Using Play List: Creating Play Lists71
 Using Play List
This section describes how to import play lists stored on a P2 
card and how to add an event at the cursor location. 
1Open the play list screen. 
2Use the cursor buttons to choose the location where 
you want to insert the event. 
3Press the MENU button. 
4Use the cursor buttons to choose [FILE] – 
[APPEND].
5Use the cursor buttons to select the number of the P2 
card slot containing the play list you want to import 
and press the SET button....

72Using Play List: Saving Play Lists
Saving Play Lists 
Use the steps below to name play lists. 
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [OPERATION] – 
[CHANGE PLAYLIST NAME] and press the SET 
button. 
4Use the on-screen keyboard to enter a name and 
press OK. 
5Close the menu and register the name in PLAYLIST 
NAME. 
◆NOTE: 
 The file name must be saved using [FILE] – [SAVE] or [FILE] – 
[SAVE AS].   
Use the steps below to save a play list stored by the...

Using Play List: Saving Play Lists73
 Using Play List
◆NOTE: 
 The filename is automatically generated and cannot be 
changed. Changing the filename on a PC will make it impossible 
to load. 
 Updated play list files cannot be loaded by older versions or 
devices. Store old versions of the play list in the unit before using 
them. They cannot be edited in the form they are loaded. 

74Using Play List: Editing Play Lists
Editing Play Lists 
Play lists can be edited in a number of different ways. 
Open the play list screen to view the play list in the play list 
area of memory in this unit. 
The procedure below describes how to load a play list stored 
on a P2 card or SD memory card to replace the play list in the 
play list area of memory in this unit. 
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [FILE] – [OPEN]. 
4Use the cursor buttons to...

Using Play List: Editing Play Lists75
 Using Play List
You can change the IN and OUT points for a play list event 
during video playback. 
1Open the play list screen. 
2Select the event you want to change.
3Press the EVENT button. 
This activates the event edit mode.
4Register a new IN point.
Use the operation buttons or search dial to look for a 
location to start an event. Then hold down the IN button 
and press the ENTRY button. 
5Register a new OUT point.
Use the operation buttons or search dial to...

76Using Play List: Editing Play Lists
◆NOTE: 
 Pressing the following buttons will also finalize a change. 
- Pressing the cursor buttons.
- Pressing the SET button. 
 Performing any of the following operations will discard the 
changes and make you return to the play list screen. 
- Pressing the EXIT button. 
- Holding down the SHIFT button and pressing the EXIT button. 
- Pressing the PLAY LIST button. You cannot make changes that go beyond the start and end 
points of a clip. 
 You cannot make changes...

Using Play List: Editing Play Lists77
 Using Play List
You can use the following procedure to delete events in the 
play list.
1Open the play list screen. 
2Select the event to delete and press the SET button.
The event is selected and appears in blue. This procedure 
can be repeated as necessary to select multiple events. 
◆NOTE: 
 To quickly select successive lines, hold down the SHIFT button 
and press the SET button (MULTI SEL) to select all events from 
the previous time the SET button was pressed...

78Using Play List: Editing Play Lists While editing a loaded play list file or the play list file has been 
saved using [FILE] – [SAVE AS], the file can subsequently be 
saved using the following procedure. 
Use [SAVE AS] for the first save operation.
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [FILE] – [SAVE].
4Press the SET button. 
5Select [YES] in the confirmation screen and press 
the SET button.
This saves the play list. 
Saving Events 

Using Play List: Overwrite Editing of Play Lists79
 Using Play List
Overwrite Editing of Play Lists
When an event is registered, an event can be overwritten on video and audio, or on EXTRA track. Overwrite editing is performed 
by specifying the IN and OUT points of the event that will be overwritten (recorder side) and the event that will overwrite it (player 
side). Switching channels and audio level adjustments are available in an overwrite edit. 
◆NOTE:
This edit function uses the play list as a...

80Using Play List: Overwrite Editing of Play Lists Select tracks to overwrite. When V is selected, audio on the 
channel other than that selected by video and EXTRA is 
overwritten. When V and EXTRA TRACK are selected, all 
audio and video tracks are overwritten. 
1Press the MENU button and use the cursor buttons 
to choose [SETTING] – [INPUT TRACK]. 
2Press the SET button, choose [VIDEO], [EXTRA AUDIO], and select desired tracks. Then press the 
SET button. 
◆NOTE:
 You can also use the INPUT SELECT...