Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions

Setup: Item Settings121
 Setup
659 Pb LVL(SD)0000
|1000
|
14130.0%
|
100.0%
|
141.3%Adjusts the PB level of SD SDI and analog composite output (– ∞ to 0 dB to +3 dB).
NOTE: 
This setting is available when CMPNT is set in menu No. 650 STYLE.
660 Pr LVL(SD)0000
|
1000
|
14130.0%
|
100.0%
|
141.3%Adjusts the PR level of SD SDI and analog composite output (– ∞ to 0 dB to +3 dB).
NOTE: 
This setting is available when CMPNT is set in menu No. 650 STYLE.
661 BK LVL(SD)0050
|
0150
|
0250–10.0%
|
0.0%
|...

122Setup: Item Settings
677 LCD ASPECT
0000
0001
0002
0003
AUTO
4:3
16:9
15:9Specifies the aspect ratio of image displayed on the LCD panel. 
0: Switches aspect ratio automatically. 
1: Displays 480i or 576i images in the 4:3 aspect ratio. 
(Displays 1080i or 720p video in the 16:9 aspect ratio.) 
2: Displays images in the 16:9 aspect ratio.
3: Displays images in the 15:9 aspect ratio.
NOTE: 
Since the LCD monitor on this unit has an aspect ratio of 15:9, a black border may appear 
above and below the...

Setup: Item Settings123
 SetupThis menu is used for audio settings. 
* An underlined setting
 indicates an initial value.
692 UMID POS0000
0001
:
0006
:
0008BLANK
12L
:
17L
:
19LSpecifies the line that superimposes UMID data. 
NOTE: 
 You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502 
VITCPOS-2. 
 Holding down the SHIFT button and pressing the RESET button will not restore the 
factory defaults. 
 UMID data is output before recorded VANC data. To output VANC data, set UMID POS 
to...

124Setup: Item Settings
725 REC CH1
0000
0001
0002
0003
0004
0005
CH1
CH2
CH3
CH4
CH1+2
CH3+4Specifies the input signal to be recorded on the audio CH1.
0: Audio input CH1 signal
1: Audio input CH2 signal
2: Audio input CH3 signal
3: Audio input CH4 signal
4: Mixed audio input CH1 and CH2 signal
5: Mixed audio input CH3 and CH4 signal
726 REC CH20000
0001
0002
0003
0004
0005CH1
CH2
CH3
CH4
CH1+2
CH3+4Specifies the input signal to be recorded on the audio CH2.
0: Audio input CH1 signal
1: Audio input CH2...

Setup: Item Settings125
 Setup
777 CH2 MIC PWR00000001
OFF
ON
Turns on and off the CH2 microphone power supply. 
0: Does not use the microphone power supply.
1: Uses the jack switch to turn the microphone power supply on and off.
785 PB MIX
0000
0001
OFF
ONSets a mix of analog and SDI audio output. NOTE: 
Press the STOP or SET button to open a subscreen and select the channels used in 
mixing audio output. To exit the subscreen, press the STOP or SET button again. 
Subscreen
01 PB CH1
0000
0001
0002
CH1...

126Setup: Item Settings This menu is used for setting up the digital video interface. 
* An underlined setting
 indicates an initial value.
This menu is used for menu settings. 
* An underlined setting
 indicates an initial value.
DIF
ItemSetting
Settings and brief function descriptionFR
No.SUPER
DISP.FR
No.SUPER 
DISP.
880 DIF SPEED0000
0001
0002
S100
S200
S400
Specifies the transfer speed of digital video interface output. 
0:100 Mbps
1:200 Mbps
2:400 Mbps
NOTE: 
A DVCPRO HD format signal cannot be...

Setup: Item Settings127
 Setup
A01 SAVE
0000
0001
0002
0003
0004
USER2
USER3
USER4
USER5
LOCKEDSpecifies the user file that saves USER 1 settings. 
0: Saved to USER 2
1: Saved to USER 3
2: Saved to USER 4
3: Saved to USER 5
4: Appears when all user files are write protected. 
NOTE: 
 A user file in change prohibit status cannot be selected. 
 When all user files are in the change prohibit status, “LOCKED” 
appears and data cannot be saved.Setting available 
for USER1 only
A02 P.ON LOAD
0000
0001
0002...

128Setup: Item Settings Use the steps below to write SETUP menu settings to or load 
from SD memory cards. The unit can handle up to four files 
and enables the input of titles. 
1Press the MENU button, select A10 CARD READ 
from USER1 in the SETUP menu and press the SET 
button. 
2Select the files to be read in the file menu that 
appears and press the SET button. 
 Files that are not written are indicated as [NO FILE]. 
 “NO CARD” is indicated when no SD memory card is 
inserted. 
3Press the button...

Setup: Item Settings129
 Setup
2The format confirmation screen appears. 
 Press the SET button to start formatting. 
 To cancel formatting and return to the previous screen, 
press the EXIT button. 
3A completion message appears when the format 
progress bar closes.  

130Setup: Time Code, User Bit and CTL
Time Code, User Bit and CTL
The time code is used when the time code signal generated 
by the time code generator is to be recorded. The time code 
values are indicated on the display and in the superimpose 
display. 
User bit refers to the 32-bit (8 digits) data frame of the time 
code signal made available to users. It allows you to record 
operator numbers and other values. The alphanumeric 
characters that can be used in the user bit are the figures from 
0 - 9...