Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions

Setup: Item Settings111
 Setup
This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12 
and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and other 
displays, sets recording formats, sets the formats that can be added to the play list and sets the time of the internal clock. 
* An underlined setting
 indicates an initial value.
BASIC
ItemSetting
Settings and brief function...

112Setup: Item Settings
008 CHARA V-POSWhen  set  to 59.94 Hz Specifies the vertical character position output via the VIDEO MON connector or displayed 
in the superimposed display of the LCD panel.
0000
|
0020
|
00220
|
20
|
22
When set to 50 Hz
0000
|
0022
|
00280
|
22
|
28
009 CHARA TYPE
0000
0001
WHITE
W/OUTSpecifies the display type output via the VIDEO MON connector or in the superimposed 
display, SETUP-MENU and other LCD panel displays. 
0: White characters against a solid black background
1:...

Setup: Item Settings113
 Setup
032 REC REF
0000
0001
NORMAL
SLTCSpecifies the reference to synchronize the frames for recording.
0: The input video signal is automatically identified and serves as reference.
1: The time code which is input to the SD I IN connector is identified and serves as 
reference.
NOTE:
When the SLTC is selected, the following settings are necessary to validate the settings 
for this item:
 Menu No. 25 SYSTEM FREQ: 59.94
 Menu No. 020 SYS FORMAT: 720p
 VIDEO INPUT SELECT: SDI
050...

114Setup: Item Settings
◆NOTE: 
 The clock is accurate to within about ±30 seconds a month with the 
power off. 
 When the precise time is required, check and reset the time while 
the power is on. 
This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed of 
FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected, PLAY 
delay time, battery type, display of warnings when power is too...

Setup: Item Settings115
 Setup
103 SEEK SEL
0000
0001
CLIP
CLIP&TSpecifies where a NEXT(SHIFT+REW) and PREV(SHIFT+FF) seek operation moves to. 
0: The start of the clip
1: The start of the clip or video text memo
NOTE:
This setting is not available during FF and REW operation. 
104 REF ALARM
0000
0001
OFF
ONSelects whether or not a warning should appear when REF.VIDEO is not connected. 
0: Displays no warning
1: Flashes the STOP lamp to warn
108 PLAY DELAY
0000
|
0015
0
|
15Sets PLAY delay time in frame...

116Setup: Item Settings Panasonic camera-recorders, recording formats and Recording Mark
*1: Recording Marks are not added to the HD SDI signal in default mode. 
181 TYPE-A NEAR0000
|0023
|
004410.6
|
12.9
|
15.0Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the 
voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has dropped. 
NOTE: 
 When a setting is made in the vicinity of 15.0 V, the counter display may flash also when 
AC power is used.
 A...

Setup: Item Settings117
 Setup
This menu specifies the ID data that will be returned to the controller. 
* An underlined setting
 indicates an initial value.
This menu sets the time code. 
* An underlined setting
 indicates an initial value.
INTERFACE
ItemSetting
Settings and brief function descriptionFR
No.SUPER
DISP.FR
No.SUPER 
DISP.
202 ID SEL0000
0001
0002OTHER
DVCPRO
ORIGSpecifies the ID data that will be returned to the controller. 
0: OTHER
1: DVCPRO
2: ORIG
NOTE:
 Select [OTHER] for ID data for...

118Setup: Item Settings
504 RUN MODE
0000
0001
REC
FREESpecifies an operating mode that advances the internal time code generator. 
0: The internal time code generator is advanced only during recording.
1: When the power is on, the internal time code generator is advanced regardless of 
operating mode.
505 TCG REGEN
0000
0001
0002
TC&UB
TC
UBSpecifies the signal to regenerate when the time code generator (TCG) is in the REGEN 
mode. 
0: Regenerates both the time code and the user bit
1: Regenerates only...

Setup: Item Settings119
 Setup
Definition of terms: 
This menu is used for video settings. 
* An underlined setting
 indicates an initial value.
515 HD EMBD LTC00000001
OFF
ON
Specifies whether or not LTC data will be superimposed on HD SDI output. 
0: Not superimposed
1: Superimposed
518 VITC GEN
0000
0001
OFF
ONSpecifies whether or not the internal time code generator value should be recorded in the 
VAUX area.
0: The internal time code generator value is not recorded.
Record the time code value when...

120Setup: Item Settings
626 D/C ENH H00000001
0dB
+1dB
Specifies whether or not horizontal outlines be emphasized in down-conversion. 
0: 0dB
1: +1dB
627 D/C ENH V0000
0001
0dB
+1dB
Specifies whether or not vertical outlines be emphasized in down-conversion. 
0: 0dB
1: +1dB
643 OUT MODE SELWhen set to 59.94 Hz Specifies the video signal output from the video output connector. 
0: Switches output automatically depending on current recording and playback format.
1: 1080/59.94i or 1080/50i
2: 720/59.94p or...