Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk101
 Using USB Connectors and SD/SDHC Memory Cards
Use this function to view hard disk information. 
1Switch to the USB host mode.
2Connect a USB hard disk.
3Open the thumbnail screen. 
4Press the MENU button. 
5Use the cursor buttons to choose [HDD] – 
[EXPLORE] and press the SET button.
◆NOTE:
 Use the right and left cursor buttons to switch between date lists 
and partition names. 
1)Display status
The name of the screen...

102Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk You can display thumbnails and manage clips stored on the 
hard disk in the same way as clips on P2 cards. 
1Open the explorer screen.
2Use the cursor buttons to select the partition where 
you want to view thumbnails and press the SET 
button.
A thumbnail of the clip on the partition now appears. 
1)Display status
Indicates the status of thumbnails of hard disk clips. 
2)Partition information
The following information...

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk103
 Using USB Connectors and SD/SDHC Memory Cards
You can import (loading data from a hard disk to a P2 card) 
data in partition units (card units) at high-speed to a P2 card 
that has the same capacity as the source card. 
1Insert the P2 card to which the data will be imported.
2Open the P2 thumbnail screen. 
3Press the MENU button. 
4Use the cursor buttons to select [HDD] – [EXPLORE] 
and press the SET button.
5Select the...

104Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards
Using SD/SDHC Memory Cards
This unit supports SD/SDHC memory cards. 
◆NOTE:
 Current SETUP menu settings can be saved to and loaded from an 
SD memory card. For details, refer to page 128.
Use the following procedure to display SD memory card 
status on screen for checking. 
1Open the thumbnail screen. 
2Press the MENU button.
3Use the cursor buttons to choose [PROPERTY] – 
[DEVICE] – [SD CARD] and press the SET button.
The...

Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards105
 Using USB Connectors and SD/SDHC Memory Cards
◆NOTE: 
 Repeat the procedures in steps 2 to 4 to format P2 cards in other 
P2 card slots. 
6Press the MENU button to end processing.  

106Setup: Unit Setup
Setup
Unit Setup
The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU. The 
SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five user 
files (USER1 to USER5) can be saved. These settings (up to 4 files) can be written to and loaded from SD memory cards. 
This unit can possess up to five user files, each of which can 
be selected from a menu setting....

Setup: Changing Settings107
 Setup
Changing Settings
The menus on the LCD monitor or a monitor (when the SUPER switch on the right side of the LCD monitor is set to “ON”) 
connected to the ANALOG COMPOSITE MONITOR OUT connector make it possible to change settings. 
1Press the MENU button.
The setup menu screen appears on the LCD monitor and 
the counter display indicates the setup menu number. 
2Select the file to change.
 Hold down the SHIFT button and press the FF  button 
or the REW  button to switch...

108Setup: Changing Settings Assign a setting item to the PF button and perform the 
following operation to change setting values. 
➝For details on how to assign items to the PF button, refer to 
“Setup menu No. A04 to A06 (PF1 ASSIGN to PF3 ASSIGN)” 
(page 127).
1Press the PF (EXIT) button. 
Registered items appear on the LCD monitor. 
2Press the PF button (1 to 3) required to bring up the 
item to change.
Each press of the button updates the setting value. 
3Press the PF (EXIT) button to end changing...

Setup: Item Settings109
 Setup
Item Settings
The system menu specifies analog component (HD) output, analog composite output, phase adjustment of audio output, system 
frequency, phase of SD REF input of HD output, and system file lock. 
* An underlined setting
 indicates an initial value.
SYSTEM
ItemSetting
Settings and brief function descriptionFR
No.SUPER
DISP.FR
No.SUPER 
DISP.
12 SYS H(HD)0000
|
1375
|
2750–1375
|
0
|
1375Adjusts system phase of analog component (HD) output and HD SDI output (in...

110Setup: Item Settings
26 HD SYS H ADV
0000
0001
0H
90HSpecifies whether or not HD output should advance 90H phase relative to SD REF input 
during SD REF input. 
0: Outputs HD at the same phase as SD REF.
1: HD output is output at a phase that is 90H advanced relative to SD REF.
NOTE: 
 The audio output and TC output are output in the same phase as HD output. 
 At 720p, the phase difference is 120H. 
 This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.
30 MENU LOCK
0000
0001
OFF...