Home
>
Panasonic
>
Recording Equipment
>
Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions
Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions
Here you can view all the pages of manual Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions . The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Clip Management: Viewing and Repairing Clip Information51
Clip Management
4Select [OK] after revising (or press the ENTRY
button).
This saves the revised metadata to the clip and the
metadata display reappears.
Select [EXIT] to cancel the entry and return to the
previous display.
◆NOTE:
Latitude and longitude cannot be changed separately. To
delete these entries, enter a blank for altitude.
Note that the metadata of a clip marked cannot be revised.
Insert the P2 card with the remainder of...](http://img.usermanuals.tech/thumb/58/68177/w300_ajhpm100_en_om_d-50.png "Page 51
Clip Management: Viewing and Repairing Clip Information51
Clip Management
4Select [OK] after revising (or press the ENTRY
button).
This saves the revised metadata to the clip and the
metadata display reappears.
Select [EXIT] to cancel the entry and return to the
previous display.
◆NOTE:
Latitude and longitude cannot be changed separately. To
delete these entries, enter a blank for altitude.
Note that the metadata of a clip marked cannot be revised.
Insert the P2 card with the remainder of...")
Clip Management: Viewing and Repairing Clip Information51 Clip Management 4Select [OK] after revising (or press the ENTRY button). This saves the revised metadata to the clip and the metadata display reappears. Select [EXIT] to cancel the entry and return to the previous display. ◆NOTE: Latitude and longitude cannot be changed separately. To delete these entries, enter a blank for altitude. Note that the metadata of a clip marked cannot be revised. Insert the P2 card with the remainder of...
Page 52
52Clip Management: Attaching Metadata to Clips Attaching Metadata to Clips A metadata upload file containing the name of the person who shot the video, the reporter, the shooting location or a text memo and other information can be saved to an SD memory card. This data file can be read and recorded as clip metadata. Use P2 viewer to create meta data upload files on a PC. P2 viewer allows you to use a PC for processing clips recorded on a P2 card. Download the latest version of P2 viewer from the URL...
Page 53
![Page 53
Clip Management: Attaching Metadata to Clips53
Clip Management
4Select [TYPE 1] or [TYPE 2] and press the SET
button.
* The metadata upload file has been read, but [META
DATA] – [RECORD] is set to [OFF]
5Press the MENU button to end processing.
The count value is indicated as a four-digit number. When
recording method “TYPE 2” is selected for the USER CLIP
NAME in the clip metadata that is loaded, the COUNT value is
incremented by 1 for each new recording and a new clip is
generated.
■To reset...](http://img.usermanuals.tech/thumb/58/68177/w300_ajhpm100_en_om_d-52.png "Page 53
Clip Management: Attaching Metadata to Clips53
Clip Management
4Select [TYPE 1] or [TYPE 2] and press the SET
button.
* The metadata upload file has been read, but [META
DATA] – [RECORD] is set to [OFF]
5Press the MENU button to end processing.
The count value is indicated as a four-digit number. When
recording method “TYPE 2” is selected for the USER CLIP
NAME in the clip metadata that is loaded, the COUNT value is
incremented by 1 for each new recording and a new clip is
generated.
■To reset...")
Clip Management: Attaching Metadata to Clips53 Clip Management 4Select [TYPE 1] or [TYPE 2] and press the SET button. * The metadata upload file has been read, but [META DATA] – [RECORD] is set to [OFF] 5Press the MENU button to end processing. The count value is indicated as a four-digit number. When recording method “TYPE 2” is selected for the USER CLIP NAME in the clip metadata that is loaded, the COUNT value is incremented by 1 for each new recording and a new clip is generated. ■To reset...
Page 54
54Clip Management: Attaching Metadata to Clips ■Incrementing the COUNT value of the USER CLIP NAME for clips exceeding 4 GB In the following case, one shot is recorded as multiple clips and the COUNT value is automatically incremented and recorded for each shot. When an 8 GB or larger P2 card is used in this unit and each continuous recording exceeds a preset time. ➝For details, refer to “Dividing clips over 4 GB in length” (page 34) When one recording spans multiple cards. A P2 device will...
Page 55
Clip Management: Attaching Metadata to Clips55 Clip Management 3Use the cursor buttons to move the pointer and press the SET button. Use this function to check loaded metadata settings. 4While viewing metadata settings, use the cursor buttons to move the cursor to the setting you want to change and press the SET button. The on-screen keyboard appears. Make the required changes. ➝For details, refer to “Using the On-screen Keyboard” (page 31). ◆NOTE: Use the cursor buttons to select a metadata...
Page 56
![Page 56
56Clip Management: Attaching Metadata to Clips
4Select [ON] and press the SET button.
This setting records the loaded metadata simultaneous
with video recording. The USER CLIP NAME is attached to
metadata as specified by the recording method.
5Press the MENU button to end setup.
6Record video on this unit.
◆NOTE:
When [OFF] is selected in step 4, no metadata is attached to the
clip.](http://img.usermanuals.tech/thumb/58/68177/w300_ajhpm100_en_om_d-55.png "Page 56
56Clip Management: Attaching Metadata to Clips
4Select [ON] and press the SET button.
This setting records the loaded metadata simultaneous
with video recording. The USER CLIP NAME is attached to
metadata as specified by the recording method.
5Press the MENU button to end setup.
6Record video on this unit.
◆NOTE:
When [OFF] is selected in step 4, no metadata is attached to the
clip.")
56Clip Management: Attaching Metadata to Clips 4Select [ON] and press the SET button. This setting records the loaded metadata simultaneous with video recording. The USER CLIP NAME is attached to metadata as specified by the recording method. 5Press the MENU button to end setup. 6Record video on this unit. ◆NOTE: When [OFF] is selected in step 4, no metadata is attached to the clip.
Page 57
![Page 57
Clip Management: Formatting P2 Cards57
Clip Management
Formatting P2 Cards
1Open the thumbnail screen.
2Press the MENU button.
3Use the cursor buttons to choose [OPERATION] –
[FORMAT] – [SLOTn] (the number of the P2 card slot
containing the card to format) and press the SET
button.
4Select [YES] and press the SET button.
The card is now formatted.
◆NOTE:
To cancel formatting, select [NO] and press the SET button.
5Press the SET button when the completion message
appears.
◆NOTE:
Repeat the...](http://img.usermanuals.tech/thumb/58/68177/w300_ajhpm100_en_om_d-56.png "Page 57
Clip Management: Formatting P2 Cards57
Clip Management
Formatting P2 Cards
1Open the thumbnail screen.
2Press the MENU button.
3Use the cursor buttons to choose [OPERATION] –
[FORMAT] – [SLOTn] (the number of the P2 card slot
containing the card to format) and press the SET
button.
4Select [YES] and press the SET button.
The card is now formatted.
◆NOTE:
To cancel formatting, select [NO] and press the SET button.
5Press the SET button when the completion message
appears.
◆NOTE:
Repeat the...")
Clip Management: Formatting P2 Cards57 Clip Management Formatting P2 Cards 1Open the thumbnail screen. 2Press the MENU button. 3Use the cursor buttons to choose [OPERATION] – [FORMAT] – [SLOTn] (the number of the P2 card slot containing the card to format) and press the SET button. 4Select [YES] and press the SET button. The card is now formatted. ◆NOTE: To cancel formatting, select [NO] and press the SET button. 5Press the SET button when the completion message appears. ◆NOTE: Repeat the...
Page 58
![Page 58
58Clip Management: Checking Card Status
Checking Card Status
Use the following procedure to display P2 card slot status and P2 card usage and other card information on the screen for
checking.
Select whether remaining capacity or used capacity should
appear in the P2 card information.
1Open the thumbnail screen.
2Press the MENU button.
3Use the cursor buttons to choose [PROPERTY] –
[PROPERTY SETUP] – [P2 CARD CAP].
4Use the cursor buttons to select an item and press
the SET button.
MEMO:An...](http://img.usermanuals.tech/thumb/58/68177/w300_ajhpm100_en_om_d-57.png "Page 58
58Clip Management: Checking Card Status
Checking Card Status
Use the following procedure to display P2 card slot status and P2 card usage and other card information on the screen for
checking.
Select whether remaining capacity or used capacity should
appear in the P2 card information.
1Open the thumbnail screen.
2Press the MENU button.
3Use the cursor buttons to choose [PROPERTY] –
[PROPERTY SETUP] – [P2 CARD CAP].
4Use the cursor buttons to select an item and press
the SET button.
MEMO:An...")
58Clip Management: Checking Card Status Checking Card Status Use the following procedure to display P2 card slot status and P2 card usage and other card information on the screen for checking. Select whether remaining capacity or used capacity should appear in the P2 card information. 1Open the thumbnail screen. 2Press the MENU button. 3Use the cursor buttons to choose [PROPERTY] – [PROPERTY SETUP] – [P2 CARD CAP]. 4Use the cursor buttons to select an item and press the SET button. MEMO:An...
Page 59
![Page 59
Clip Management: Checking Card Status59
Clip Management
After completing the settings described on the previous page,
you can use the procedure described below to check the
status of P2 cards in P2 card slots.
1Open the thumbnail screen.
2Press the MENU button.
3Use the cursor buttons to choose [PROPERTY] –
[CARD STATUS] and press the SET button to
display P2 card status.
1)Write protect mark
A write-protected P2 card is indicated by the mark
displayed here.
2) P2 card status
The remaining...](http://img.usermanuals.tech/thumb/58/68177/w300_ajhpm100_en_om_d-58.png "Page 59
Clip Management: Checking Card Status59
Clip Management
After completing the settings described on the previous page,
you can use the procedure described below to check the
status of P2 cards in P2 card slots.
1Open the thumbnail screen.
2Press the MENU button.
3Use the cursor buttons to choose [PROPERTY] –
[CARD STATUS] and press the SET button to
display P2 card status.
1)Write protect mark
A write-protected P2 card is indicated by the mark
displayed here.
2) P2 card status
The remaining...")
Clip Management: Checking Card Status59 Clip Management After completing the settings described on the previous page, you can use the procedure described below to check the status of P2 cards in P2 card slots. 1Open the thumbnail screen. 2Press the MENU button. 3Use the cursor buttons to choose [PROPERTY] – [CARD STATUS] and press the SET button to display P2 card status. 1)Write protect mark A write-protected P2 card is indicated by the mark displayed here. 2) P2 card status The remaining...
Page 60
![Page 60
60Clip Management: Checking Card Status
6)Card warning messages
This warning appears when the following P2 cards are
inserted.
[RUN DOWN CARD]
The card has been overwritten the maximum number
of times.
[DIR ENTRY NG CARD]
Directory structure does not conform to standard
specifications.
Use Detailed P2 Card Status for more information.
4Press the EXIT button to end processing.](http://img.usermanuals.tech/thumb/58/68177/w300_ajhpm100_en_om_d-59.png "Page 60
60Clip Management: Checking Card Status
6)Card warning messages
This warning appears when the following P2 cards are
inserted.
[RUN DOWN CARD]
The card has been overwritten the maximum number
of times.
[DIR ENTRY NG CARD]
Directory structure does not conform to standard
specifications.
Use Detailed P2 Card Status for more information.
4Press the EXIT button to end processing.")
60Clip Management: Checking Card Status 6)Card warning messages This warning appears when the following P2 cards are inserted. [RUN DOWN CARD] The card has been overwritten the maximum number of times. [DIR ENTRY NG CARD] Directory structure does not conform to standard specifications. Use Detailed P2 Card Status for more information. 4Press the EXIT button to end processing.