Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions

Introduction: Using the On-screen Keyboard31
 Introduction
Using the On-screen Keyboard
The full keyboard appears when necessary. 
Move the cursor to the character you want to enter and press 
the SET button. 
Use the cursor buttons to move the cursor. 
The keyboard keys have the functions listed below. 
◆ NOTE:
 RESET deletes all entered characters. 
 When you press the shortcut EXIT button, a confirmation message 
appears. Select [YES] and press the SET button to close the on-
screen keyboard. 
The ten...

32Introduction: Recording, Playback and P2 Card Handling
Recording, Playback and P2 Card Handling
◆NOTE: 
 When you use this unit for the first time, be sure to set the internal 
clock in setup menu No. 069 (CLOCK SET). 
1Turn on the POWER switch of this unit. 
2Insert a P2 card in a P2 card slot, and push it in until
the EJECT button pops out. 
3Bend the protruding EJECT button downwards to the
right and set the card lock to ON. 
 The P2 card access LEDs on this unit show P2 card status 
when a P2 card...

Introduction: Recording, Playback and P2 Card Handling33
 Introduction
◆NOTE: 
 Do not remove P2 cards during access or during recognition 
directly after insertion (when the P2 card access LED flashes 
orange). 
1Press the STOP   button. 
When the P2 card access LED of a card to be removed 
flashes orange, press the STOP   button to stop the 
flashing. 
2Set the card lock to OFF and raise the EJECT button. 
3Press the EJECT button to eject the P2 card. 
◆NOTE: 
 Removing a P2 card in the thumbnail...

34Introduction: Recording, Playback and P2 Card Handling
◆NOTE: 
 Detailed check of P2 card status is possible. Refer to “Checking 
Card Status” on page 58.
A continuous recording that is longer than the durations given 
below when an 8 GB P2 card is used in this unit will result in 
the automatic division of the recording into different clips. 
Even so, the recordings on the two clips can be handled as a 
single clip in thumbnail operations (display, delete, repair, 
copy, etc.) on a P2 device. 
Such a...

Introduction: Jog and Shuttle Operations Using the Search Dial35
 Introduction
Jog and Shuttle Operations Using the Search Dial
The search dial is used to search and check video. 
Each press of the dial alternates it between SHTL mode and 
JOG mode. When the power is turned on, the search dial will not operate 
unless it is first returned to the STILL position. 
1Press the search dial so that it remains pressed in. 
The jog mode is now engaged. 
2Turn the search dial. 
The dial’s click stops are released...

36Clip Management: Thumbnail and Clip Management
Clip Management
Thumbnail and Clip Management
This unit provides a thumbnail screen for managing clips. A 
clip is a single data item that contains video, audio, metadata 
and other additional information. Normally, a clip is one shot 
generated from the start of recording until recording stops. 
However, when a shot spans multiple P2 cards, the video on 
each card is handled as an independent clip. 
The thumbnail screen shows a list of thumbnails. Each...

Clip Management: Thumbnail and Clip Management37
 Clip Management
1.Display status
Display status indicates the type of thumbnails 
displayed on the screen. 
➝For details on how to change display, refer to 
“Switching the Type of Information That is 
Displayed” (page 39).
2.Record mode
Indicates the record mode of the clip at the cursor 
position. 
3.System format
Indicates the recording format of the clip at the cursor 
position. 
4.Duration
Indicates the duration of the clip at the cursor position....

38Clip Management: Thumbnail and Clip Management
16. P2 card slot number and hard disk drive status
P2 card and USB hard disk drive status is indicated as 
described below. 
17.Status message
Shows messages indicating processing status. For 
example, screen updating shows an [UPDATING] text 
message and a rotating   icon.  -   
(white)The number of the P2 card slot that 
contains a P2 card is indicated in white.
 - 
(yellow)The number of the P2 card slot of the P2 
card that contains the clip at the...

Clip Management: Thumbnail and Clip Management39
 Clip Management
The thumbnail screen can be customized to suit operating 
conditions and improve efficiency. 
1Open the thumbnail screen. 
2Press the MENU button. 
3Use the cursor buttons to select the clip type that 
should appear under [THUMBNAIL]. 
4Press the SET button. 
◆NOTE: 
(These operations can also be performed using buttons.)
 Press SHIFT + IN and the indication changes in the following 
order each time these buttons are pressed: SELECTED ➝...

40Clip Management: Thumbnail and Clip Management The thumbnail display can be customized to suit different 
operating needs. The following describes procedures for 
changing thumbnail display indicators and data settings. 
1Open the thumbnail screen. 
2Press the MENU button. 
3Use the cursor buttons to select the item that should 
appear under [THUMBNAIL] – [SETUP]. 
* An underlined setting indicates an initial value.
Setting Items to Display 
ALL HIDE: ON Hides all indicators
OFF
Indicators are...