Panasonic Memory Card Portable Recorder Player Ajhpm100 Operating Instructions

Using Play List: Viewing Event Information91
 Using Play List
Viewing Event Information
You can use this function to view and confirm miscellaneous 
event information. 
1Open the play list screen. 
2Use the cursor buttons to select the event that you 
want information about. 
3Press the MENU button. 
4Use the cursor buttons to choose [PROPERTY] – 
[EVENT PROPERTY] and press the SET button. 
Information on the event appears. 
◆NOTE:
 Holding down the SHIFT button in step 2 while pressing the 
SPLIT button...

92Using Play List: Viewing Event Information You can use this function to check the content of an event by 
playing if from its IN point to its OUT point. 
1Open the play list screen. 
2Use the cursor buttons to select the clip you want to 
review.
3Hold down the SHIFT button and press the PLAY   
button.
This plays back the clip from before the IN point (preroll 
time is 3 s) to beyond its OUT point (postroll time is 1 s). 
◆NOTE: 
 The preroll time and postroll time for the first and last clip are...

Using Play List: Playing Back Play Lists93
 Using Play List
Playing Back Play Lists 
During play list playback, you can select whether the time 
code should be replaced and output as a continuous value or 
the time code of each clip should be output. You can set the 
time code start value when it is replaced at output. 
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [SETTING] – 
[REPLACE TC] – [REPLACE]. 
4Select [ON] and press the SET button.
This replaces the...

94Using Play List: Playing Back Play Lists Use the following procedure to play back the play list. 
1Open the play list screen. 
2Use the cursor buttons to select the event you want 
to start playback. 
3Set the playback time code as necessary.
➝For details, refer to “Setting the Playback Time Code 
(TC)” (page 93).
4Press the PLAY   button. 
Playback starts from the cursor location and continues 
until the end of the play list or until all playable events have 
been played. 
◆NOTE: 
 During play list...

Using Play List: Creating New Clips From the Play List (Edit Copy)95
 Using Play List
Creating New Clips From the Play List (Edit Copy)
You can use the play list to create a new clip. 
This function is called edit copy. 
◆NOTE: 
 The playback time code setting allows you to start the time code 
from a set value after edit copy. Set the playback time code as 
necessary.
➝For details, refer to “Setting the Playback Time Code (TC)” (page 
93).
 You cannot use edit copy to create clips that span multiple...

96Using USB Connectors and SD/SDHC Memory Cards: Using USB Connectors
Using USB Connectors and SD/SDHC Memory Cards
Using USB Connectors
You can use the USB 2.0 connector on this unit to connect a hard disk or a PC to save and manage clips efficiently. 
Connect a USB 2.0 hard disk to save P2 card data, view 
saved data and import data to P2 cards. 
A USB 2.0 connection with a PC allows you to use P2 cards 
inserted in the slots on this unit as mass storage. The PC then 
requires that a USB (USB 2.0)...

Using USB Connectors and SD/SDHC Memory Cards: Connecting a PC to This Unit97
 Using USB Connectors and SD/SDHC Memory Cards
Connecting a PC to This Unit
1Press the PC button when this unit is idle. 
2Select [USB DEVICE] in the confirmation screen and 
press the SET button.
“USB DEVICE” flashes on the LCD monitor to indicate that 
the unit is entering the USB host mode. After the mode 
switch, “USB DEVICE DISCONNECT” appears on the LCD 
screen. This message is replaced by a “USB DEVICE 
CONNECT” message...

98Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk
Using This Unit With a Hard Disk
This unit supports the following hard disks types. 
 Panasonic portable hard disk unit P2 store (AJ-PCS060G)
 A hard disk that supports the USB 2.0 interface
Available functions depend on the type of hard disk used. In 
the host mode, “PARTITION:” in the left half of the Explorer 
screen provides information on the hard disk that is 
connected to the unit. ◆NOTE: 
 This unit supports USB bus...

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk99
 Using USB Connectors and SD/SDHC Memory Cards
1Press the PC button when this unit is idle. 
◆NOTE:
 In the play list mode, the PC button is not available during 
remote operation. 
2Select [USB HOST] in the confirmation screen and 
press the SET button.
“USB HOST” flashes on the LCD monitor to indicate that 
the unit is entering the USB host mode. After the mode 
switch, the thumbnail screen appears and “USB HOST” is...

100Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk
7When the confirmation message appears again, 
select [YES] and press the SET button.
This starts hard disk formatting. 
A TYPE S hard disk allows you to export data to a hard disk 
(by writing data from a P2 card to a hard disk) in P2 card units. 
First use this unit to format the hard disk. Up to 23 cards can 
be exported to a hard disk. 
The exported data from a P2 card is recognized as a separate 
drive on a computer....