Panasonic LCD Projector Pt Vx42 Operating Instructions

Projector settings
1) Turn on the projector.
2) Press the  button to display the [NETWORK/USB] menu, and then pres\
s  button.
3) Press as to select [WIRELESS LAN].
4) Press qw to select [SIMPLE] or [NORMAL].
5) Press the  button.
 fThe [WIRELESS LAN] screen is displayed.
6) According to the network number selected in step 4), set the [WIRELESS \
DETAILED SETUP].
 fFor details, see “WIRELESS DETAILED SETUP”. (Æ page 91) 
Note
 fWireless LAN and wired LAN cannot be used in the same segment.
 fWhen...

Note
 fIf you use any wireless LAN connection utility that meets the OS standard, follow the operation instruction of the utility to 
connect it.
Accessing from the web browser
1) Start up the web browser on the computer.
2)  Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
 fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is 
panasonic (lower case).
4) Click...

Description of each item 
1
2
3
4
5
6
1 Page tabSwitches pages by clicking this item.
2 [Status]The status of the projector is displayed by clicking this item.
3 [Projector control]The [Projector control] page is displayed by clicking this item.
4 [Detailed set up]The [Detailed set up] page is displayed by clicking this item.
5 [Change password]The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]The control page of Crestron Connected™ is displayed by clicking this...

Error information page 
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to 
display the error/warning details.
 fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error.
1
1 Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning....

2
1
1 [WIRELESS LAN]Displays the configuration details of wireless LAN.2 [WIRED LAN]Displays the configuration details of wired LAN.
[Basic control] page 
Click [Projector control] → [Basic control].
1
2
5
6 3
4
1 [INPUT]Switches the input signal.
2 [VOLUME]Adjusts the volume level.
3 [PICTURE MODE]Switches the picture mode.
4 [AV MUTE]Switches between AV mute on/off.
5 [POWER]Turns on/off the power.
6 [CLOSED CAPTION]Switches the closed caption mode.
Note
 fWhen [NETWORK/USB] → [WIRELESS LAN] is set to...

1 [POSITION]Adjusts the position of image and the keystone correction.2 [PICTURE]Adjusts the items of image.
[Network config] page
Click [Detailed set up] → [Network config].
1) Click [Network config].
 fThe [CAUTION!] screen is displayed.
2)  Select the item which you want to change the setting, then click [Next].
 fThe current setting is displayed.
3) Click [Change] button.
 fThe setting change screen is displayed.
Wired LAN
1
2
3
4
5
6
7
1 [DHCP ON], [DHCP OFF]To enable the DHCP client function, set...

Note
 fWhen you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In 
that case, click [Network config] again since the following operation will not be guaranteed.
 fChanging LAN settings while connected to the LAN may cause the connection to cut out.
Wireless LAN (SIMPLE)
1
2
1 [KEY]Set the key to be used in SIMPLE.Input 8 to 15 alphanumeric character.
2 [Back], [Next]Click the [Back] button to return to the original screen. The current settings are...

Wireless LAN (USER 1~USER 3)
1
2
3
4
5
6
7
8
9
10 7
7
1 [DHCP ON], [DHCP OFF]To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]Enter the default gateway address when not using a DHCP server.
5 [DNS1], [DNS2]Enter the preferred DNS/alternate DNS server when not using a DHCP server.
6 [SSID]Enter the same character string that are registered in the...

[E-mail set up] page 
When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to 
two addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]Select [Enable] to use the E-mail function.
2 [SMTP SERVER NAME]
Enter the IP address or the server name of the E-mail server (SMTP). To enter the server name, the DNS server needs to be set up.
3 [MAIL FROM]Enter the E-mail address of the projector. (Up to 63 characters in...

 [Authentication set up] page 
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
78
1 [Auth]Select the authentication method specified by your Internet service provider.
2 [SMTP Auth]Set when the SMTP authentication is selected.
3 [POP server name]Enter the POP server name.Allowed characters:Alphanumerics (A - Z, a - z, 0 - 9)Minus sign (-) and period (.)
4 [User name]Enter the user...