Panasonic LCD Projector Pt Vx42 Operating Instructions

The factory default ID number of the projector is set to [ALL]. When using a single projector, press the  button on 
the remote control. Also, you can control a projector by pressing the  button on the remote control even if you do not 
know the projector ID.
 buttons
1) Press the  button on the remote control.
2) Within five seconds, press the one-digit ID number set on the projector u\
sing the number ( - )
buttons.
 fIf you press the  button, you can control the projectors regardless of the ID number...

Chapter 4   Settings
This chapter describes the settings and adjustments you can make using the on-screen menu.
52 - ENGLISH  

Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 
button
1) Press the  button on the remote control or the control panel.
 fThe main menu screen appears.
2) Press as to select an item from the main menu.
 fThe selected item is highlighted in yellow.
3) Press the  button.
 fThe submenu is displayed, and submenu items become selectable.
4) Press as to select the desired sub-menu item, press qw or...

Note
 fPressing the  button or  button while the menu screen is displayed returns to the previo\
us menu.
 fSome items may not be adjusted or used for certain signal formats to be \
input to the projector. The menu items that cannot 
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
 fSome items can be adjusted even if signals are not input.
 fIndividual adjustment screen is cleared...

Sub-menu itemFactory defaultPage
[CONTRAST][0]57
[BRIGHTNESS][0]57
[COLOR]*2[0]58
[TINT]*2[0]58
[SHARPNESS][8]58
[COLOR TEMPERATURE][DEFAULT]58
[IRIS][ON]59
[ADVANCED MENU]-59
[DAYLIGHT VIEW][AUTO]59
[DIGITAL CINEMA REALITY]*2[ON]60
[NOISE REDUCTION]*3[OFF]60
[TV-SYSTEM]*3[AUTO]60
[RGB/YPBPR] / [RGB/YCBCR]*4[AUTO]60
*1 It may be different depending on the input signal.
*2 Only for movie-based signals.
*3 Only when the  terminal is selected.
*4 Only when the  /  /  /  /  
terminal is selected.
Note
 fThe...

Sub-menu itemFactory defaultPage
[COMPUTER1 INPUT SETTING][RGB/YPBPR]78
[COMPUTER2 SELECT][COMPUTER2 IN]78
[PROJECTOR ID][ALL]79
[INITIAL START UP][LAST MEMORY]79
[PROJECTION METHOD][FRONT/DESK]79
[LAMP POWER][NORMAL]79
[ECO MANAGEMENT]-80
[RS-232C][PROJECTOR]81
[EMULATE][DEFAULT]81
[FUNCTION BUTTON]-82
[AUDIO SETTING]-82
[TEST PATTERN]-84
[FILTER COUNTER]-84
[INITIALIZE ALL]-84
[SECURITY] 
Sub-menu itemFactory DefaultPage
[PASSWORD][OFF]85
[PASSWORD CHANGE]-85
[TEXT DISPLAY][OFF]86
[TEXT CHANGE]-86...

[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the submenu.
Refer to "Navigating through the menu" (Æ page 53) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source \
and the environment in which the projector is used.
1) Press as to select [PICTURE MODE]. 
2) Press qw or the  button.
 fThe [PICTURE MODE] individual adjustment...

OperationAdjustmentAdjustment range
Press the w button.Increases the brightness of the dark (black) parts of the screen.-32 ~ +32Press the q button.Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
(Only for movie-based signal input) 
You can adjust the color saturation of the projected image.
1) Press as to select [COLOR].
2) Press qw or the  button.
 fThe [COLOR] individual adjustment screen is displayed.
3) Press qw to adjust the level.
OperationAdjustmentAdjustment range
Press...

[DEFAULT]Factory default setting.
[HIGH]Becomes a bluish image. Select this when the white areas of the projecte\
d image are reddish.
[LOW]Becomes a reddish image. Select this when the white areas of the project\
ed image are bluish.
[IRIS]
Aperture correction and signal compensation are performed automatically \
based on the image to result in an image of optimum contrast.
1) Press as to select [IRIS].
2) Press qw or the  button.
 fThe [IRIS] individual adjustment screen is displayed.
3) Press qw to...

Note
 f[DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to 
[REAR/DESK] or [REAR/CEILING].
 fThe [AUTO] mode may not function properly if an object is placed on the top of the projector.
[DIGITAL CINEMA REALITY]
(Only for movie-based signal input)
You can improve the vertical resolution of 2-2 and 2-3 pull down video.
This function is available only with the following signal inputs.
525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, VIDEO...