Panasonic LCD Projector Pt Vx42 Operating Instructions

2) Press qw or the  button.
 fThe [RGB/YPBPR] or [RGB/YCBCR] individual adjustment screen is displayed.
3) Press qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO]The sync signal automatically selects the signal [RGB] / [YPBPR] / [YCBCR].
[RGB]Select it for RGB signal input.
[YPBPR]Select it for YPBPR signal input.
[YCBCR]Select it for YCBCR signal input.
When the  / *1 terminal is selected
 fFor 525i (480i), 625i (576i), 525p (480p) and 625p (576p) input
Select [AUTO],...

[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an \
item from the submenu.
Refer to "Navigating through the menu" (Æ page 53) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[REALTIME KEYSTONE]
The projector can correct the vertical trapezoidal distortion automatically when the projector is installed tilted.
1) Press as to select [REALTIME KEYSTONE].
2) Press qw or the  button.
 fThe [REALTIME KEYSTONE] individual...

ItemsOperationAdjustment
[H]
Press the q button.Left side will be smaller.
Press the w button.Right side will be smaller.
[V]
Press the a button.Upper will be smaller.
Press the s button.Lower will be smaller.
Setting [CORNER CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the  button.
 fThe [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [CORNER CORRECTION].
4) Press the  button.
 fThe [CORNER CORRECTION] screen is displayed.
5) Press as to select the item to adjust, then...

Adjusting [KEYSTONE]
1) Press asqw to adjust.
For details, please refer to [KEYSTONE] in [SCREEN ADJUSTMENT] menu. (Æ page 62)  
Adjusting [ARC]
ItemsOperationAdjustment
[H]
Press the q button.The top and bottom of 
horizontal line will be bulge.
[VERTICAL ARC]
[HORIZONT AL ARC]
Press the w button.The top and bottom of 
horizontal line will be dent.
[V]
Press the a button.The left and right of vertical 
line will be dent.
[VERTICAL  ARC]
[HORIZONT AL ARC]
Press the s button.The left and right of vertical...

[LENS THROW RATIO]Set the throw ratio for the lens used.
[KEYSTONE]Adjusts when the trapezoid of the projected image is distorted.
[BALANCE]Adjusts according to the lens shift range in the horizontal or vertical direction.
Adjusting [LENS THROW RATIO]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the  button.
 fThe [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [KEYSTONE].
4) Press the  button.
 fThe [KEYSTONE] screen is displayed.
5) Press as to select [LENS THROW RATIO].
6) Press...

3) Press as to select [KEYSTONE].
4) Press the  button.
 fThe [KEYSTONE] screen is displayed.
5) Press as to select [BALANCE].
6) Press the  button.
 fThe [BALANCE] individual adjustment screen is displayed.
7) Press as to adjust the balance.
Adjustment
Adjusts the balance according to the amount of 
the vertical lens shift adjustment.
[VERTICAL BALANCE][HORIZONT AL BALANCE]
Setting [CORNER CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the  button.
 fThe [SCREEN ADJUSTMENT] screen is...

 fThe [CURVED CORRECTION] screen is displayed.
5) Press as to select the item to adjust, then press the  button.
 fThe [CURVED CORRECTION] individual adjustment screen is displayed.
6) Press as to select one item to adjust.
[LENS THROW RATIO]*1Adjusts when the throw ratio of projector lens is changed.
[KEYSTONE]*2Adjusts when the trapezoid of the projected image is distorted.
[ARC]*3Adjusts when the radian of the projected image is distorted.
[BALANCE]*4Adjusts when the balance of the projected image is...

Horizontal (right and left) 
adjustment.
Press the w button.The image position moves to the 
right.
Press the q button.The image position moves to the 
left.
Note
 fDepending on the input signal, if the adjustment of [SHIFT] exceeds the effective adjustment range of the input signal, the 
position of the image cannot be changed. Please adjust [SHIFT] within an ef fective adjustment range.
[DOT CLOCK]
(Only for computer (RGB) signals input)
Use this function to adjust and minimize the effect of...

[ASPECT]
You can switch the aspect ratio of the image.
The aspect ratio is switched within the screen range selected in [SCREEN SETTING].  
Set [SCREEN SETTING] first. (Æ page 73)
1) Press as to select [ASPECT].
2) Press qw or the  button.
 fThe [ASPECT] individual adjustment screen is displayed.
3) Press qw to switch the item.
 fThe items will switch each time you press the button.
[NORMAL]Displays images without changing the aspect ratio of the input signals.
[AUTO]*1The aspect ratio is automatically...

[LANGUAGE] menu
On the menu screen, select [LANGUAGE] from the main menu, and select an \
item from the submenu.
Refer to "Navigating through the menu" (Æ page 53) for the operation of the menu screen.
 fPress as to select a language, and press  button to set.
[LANGUAGE]
You can select the language of the on-screen display.
 fVarious menus, settings, adjustment screens, control button names, etc., \
are displayed in the selected language.
 fThe language can be changed to English, German, French,...