Home > Panasonic > Projector > Panasonic LCD Projector Pt Vx42 Operating Instructions

Panasonic LCD Projector Pt Vx42 Operating Instructions

Here you can view all the pages of manual Panasonic LCD Projector Pt Vx42 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 141

Cable specifications
[When connected to a computer] 
Projector
( terminal)
1NCNC1
Computer
(DTE specifications)
22334NCNC4556NCNC677889NCNC9
Control commands
When controlling the projector from a computer, the following commands are available.
 rProjector control command
CommandControl contentsParameter / return stringRemarks
PONPower on―To check if the power is on, use the “Power 
query” command.POFPower off
IISINPUT selection
VID
RG1
RG2
HD1
HD2
DL1
NWP
PA 1
MC1
MV1
VIDEO
RGB1
RGB2
HDMI1
HDMI2
DIGITAL...

Page 142

List of compatible signals
The following table specifies the type of signals compatible with the projectors.
 fSymbols that indicate formats are as follows.
 gV : VIDEO
 gR : RGB
 gY : YCBCR/YPBPR gH : HDMI/DIGITAL LINK
ModeDisplay resolution(dots)
Scanning frequencyDot clock frequency (MHz)Format
PnP*1
H (kHz)V (Hz)COMPUTER1 / COMPUTER2
HDMI / DIGITAL LINK
NTSC/NTSC4.43/
PAL-M/PAL60720 x 480i15.759.9―V――
PAL/PAL-N/SECAM720 x 576i15.650.0―V――
525i (480i)720 x 480i15.759.913.5R/Y――
625i (576i)720 x...

Page 143

ModeDisplay resolution(dots)
Scanning frequencyDot clock frequency (MHz)Format
PnP*1
H (kHz)V (Hz)COMPUTER1 / COMPUTER2
HDMI / DIGITAL LINK
1280 x 7201 280 x 72037.1 49.8 60.5 R/H――
1 280 x 72044.8 59.9 74.5 R/H――
1280 x 7681 280 x 76860.3 74.9 102.3 R/H――
1 280 x 76868.6 84.8 117.5 R/H――
1280 x 800
1 280 x 80041.3 50.0 68.0 R/H――
1 280 x 80049.7 59.8 83.5 R/Hl*5l*5
1 280 x 80062.8 74.9 106.5 R/H――
1 280 x 80071.6 84.9 122.5 R/H――
1280 x 9601 280 x 96060.060.0108.0R/H――
SXGA
1 280 x 1...

Page 144

Glossary for network functions
ItemDescriptions
Access point
These are stations for relaying electromagnetic signals between computer\
s in a wireless 
LAN. When a computer is connected to an access point, it can communicate through the 
network connected to the access point.
AES
Next generation standard cryptography standardized by the National Institute of Standards 
and Technology (NIST).
AES: Advanced Encryption Standard
DEFAULT GATEWAY
The devices that are used for different network standards from...

Page 145

ItemDescriptions
RADIUS server
RADIUS is an abbreviation of Remote Access Dial In User authentication Service, and 
it is a protocol used for authentication in various networks such as wir\
eless LAN. An 
authentication server compatible with the protocol is called a RADIUS se\
rver.
The RADIUS server eliminates the need of registering user information se\
parately in each 
device even when there are multiple network devices, and enables integra\
ted management 
of multiple network devices and users....

Page 146

Specifications
The specifications of this projector are as follows.
Power supplyAC120 V, 50 Hz / 60 Hz(For North America)
AC100 V - 240 V, 50 Hz / 60 Hz (For other countries)
Power consumption
PT-VZ575N380 W (3.6 A) (For North America)
386 W (4.4 A-1.8 A) (For other countries)
PT-VW535N, PT-VX605N363 W (3.4 A) (For North America)
369 W (4.2 A-1.7 A) (For other countries)
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [ECO]: 
0.2 W (For North America), 0.4 W (For other countries)
When [STANDBY MODE] of...

Page 147

Applicable 
scanning 
frequency 
For HDMI signal
525i(480i)*2, 625i(576i)*2, 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 
1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/25p, 1125(1080)/30p, 1125(1080)/60p, 
1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
Displayable resolution: VGA to WUXGA (non-interlace)
Dot clock frequency: 25 MHz to 162 MHz
Color system7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size0.76 m -7.62 m (30"-300")
Screen aspect ratioPT-VZ575N, PT-VW535N16:10...

Page 148

*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 This is an average value. It may differ depending on individual product.
*4 [LAMP POWER] will be switched to [ECO] automatically when the operating environment temperature is 35 °C (95 °F) to 
40 °C (104 °F).
Note
 fThe part numbers of accessories and separately sold components are subje\
ct to change without notice.
Power cable...

Page 149

Dimensions

104.6 (4-1/8)
63.8 (2-1/2)
332.0 (13-1/16)
389.0 (15-5/16)
250.0 (9-27/32 )
125.0 (4-29/32)
337.0 (13-9/32)
 Actual dimension may differ by product.
ENGLISH - 149
Chapter 7   Appendix - Dimensions  

Page 150

Ceiling mount bracket safeguards
 fWhen installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket for Projectors. 
Model No. of ceiling mount bracket:   
 ET-PKL100S (for low ceilings); ET-PKV400B (Projector mount bracket) 
 ET-PKL100H (for high ceilings); ET-PKV400B (Projector mount bracket) 
 fWhen installing the projector, attach the drop-prevention kit included with the Ceiling Mount Bracket for Projectors.
 fAsk a qualified technician to do the installation...
Start reading Panasonic LCD Projector Pt Vx42 Operating Instructions

Related Manuals for Panasonic LCD Projector Pt Vx42 Operating Instructions

All Panasonic manuals