Panasonic LCD Projector Pt Vw435NE Operating Instructions

Network
ENGLISH - 81
Settings
E-mail set up page  
J
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be 
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1
  Select Enable to use the e-mail function.
2   Enter the IP address or server name of the 
e-mail server (SMTP). The DNS server must be 
set if the server name is entered.
3   Enter the...

Network
82 - ENGLISH
Settings
E-mail set up page (continued) 
J
9
    Enter the E-mail Address2 of your desired recipient.
10    Select the conditions for sending e-mail.
      MAIL CONTENTS: Select [NORMAL] or [SIMPLE].
  ERROR: An error is detected by self-diagnosis.
  LAMP RUNTIME: Remaining lamp service time has reached the value set in the field.
  INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field. 10
9
Authentication set up page  
J
The POP/SMTP server is set on...

Network
ENGLISH - 83
Settings
Contents of mail sent  
J
Mail with the contents shown below is sent when the e-mail settings have\
  
z
been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Ty pe          : PT-VX505N
Serial No               : 000000000
-----  E-mail setup data -----
TEMPER ATURE WARNING SETUP 
MINIMUM TIME            at [ 60] minutes interval 
INTAKE AIR TEMPER ATURE  Over [ 32degC / 89degF ] 
ERROR             
      [ OFF ] 
LA MP RUNTIME            [ OFF ]   at REM...

Network
84 - ENGLISH
Settings
Mail with the contents shown below is sent when an error has occurred. 
z
=== Panasonic projector report(ERROR) ===
Projector Ty pe          : PT-VX505N
Serial No               : 000000000
-----  check system -----
FAN                   
        [   OK   ]
INTAKE AIR TEMPER ATURE        [   OK   ]
EXHAUST AIR TEMPER ATURE   
    [   OK   ]
OPTICS MODULE TEMPER ATURE     [   OK   ]
LA MP REM AIN TIME              [   OK   ]
LA MP STATUS                
   [ FAILED ]
APERTURE...

Network
ENGLISH - 85
Settings
Change Password page  
J
Click [Change password].
   1
  Administrator
2   User
 
Administrator mode 
1   Account
2   Current user name input field
3   Current password input field
4   New user name input field
5   New password input field
6   New password input field (re- enter for 
confirmation)
7   Button for executing password change
 
User account
1   Account
2   New user name input field
3   New password input field
4   New password input field (re- enter for...

Network
86 - ENGLISH
Settings
CRSTRON RoomView page  
J
You can monitor or control the projector using RoomView.
To display the operation page of RoomView from Web Control screen, access with the administrator rights is 
required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.)
When you click [CRESTRON RoomView], the RoomView operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this...

Network
ENGLISH - 87
Settings
Info page
Click Info on the operation page.
1  Projector name
    Displays the name of the projector.
2   Mac Address
     Displays the MAC address
. “Glossary” (Æpage  115 – 116)
3
  Resolution
     Displays the resolution of the projector.
4   Lamp Hours
     Displays the lamp usage time (converted value).
5   Power Status
     Displays the status of the power.
6   Source
     Displays the selected video input.
7   Projector Position
     Displays the projection...

Network
88 - ENGLISH
Settings
Memory Viewer function
The Memory Viewer function is to make a presentation or project an image without using computers or some 
other external equipment. You do not have to carry a computer or other equipment to project images.
Store images on a dedicated USB (Universal Serial Bus) thumb drive and insert it into the USB port (Series A) of 
the projector, then you can project those images.Which images can be projected with the Memory Viewer function?
With the Memory Viewer...

Network
ENGLISH - 89
Settings
CAUTION on Handling and Storing the USB thumb drive 
   Do not put USB thumb drive or its cap within close reach of children. Swallowing them may cause 
suffocation.
 If the smoke or questionable odor rise, turn off the peripheral equipment and contact yourdealer.
 Do not put water, chemical or oil to the USB thumb drive. It may cause short out or fire.
   Do not put foreign objects or put metal objects to the USB terminal. Static electricity may cause data loss or 
data...

Network
90 - ENGLISH
Settings
Displaying the memory viewer browser window 
J
When you press  button in the memory viewer mode, following browser window 
“Thumbnail” or “Filename list” appears on the screen.
Filename list display         
Displays current directory path
Menu             
Moves
to upper
directory
Thumbnail display        Displays current directory path
Menu             
Moves
to upper
directory
   Even before the completion of thumbnail images drawing, the image selection is available by...