Home > Panasonic > Projector > Panasonic LCD Projector Pt Vw435NE Operating Instructions

Panasonic LCD Projector Pt Vw435NE Operating Instructions

Here you can view all the pages of manual Panasonic LCD Projector Pt Vw435NE Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 41

Menu Navigation
ENGLISH - 41
Settings
Main menu
The main menu consists of the following 9 menu 
items.
When a main menu item is selected, the screen 
changes to a submenu selection screen.
Input
PC adjust
Image select
Image adjust
Screen
Sound
Setting
Information
Network
Sub menu
The sub-menu screen of the selected main menu 
appears, and you can set and adjust the various items 
in the submenu.
Input [  
J ]
Sub-menu item
Factory defaultPage
Computer 1 RGB43
Computer 2 RGB43
HDMI  -43
Video  -43
S-video...

Page 42

Menu Navigation
42 - ENGLISH
Settings
Screen [  ]
Sub-menu itemFactory defaultPage
Normal - 52
Full - 52
Wide (16:9) - 52
Zoom - 52
True*
1-  52
Natural wide*
2- 52
Custom - 52
Custom adj. - 53
Digital zoom +*
1-  53
Digital zoom -*
1-  53
Keystone Store 53
Ceiling Off 54
Rear Off 54
Screen aspect*
2Default(16:10) 54
Reset - 54
When input computer signal to the projector, these 
*1 : 
functions will be available.
PT-VW435NE Only.
*2 : 
Sound [  
J ]
Sub-menu item
Factory DefaultPage
Volume 3255
Mute...

Page 43

ENGLISH - 43
Settings
Input menu
Select [Input] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Computer 1: RGB/Component 
/RGB (Scart) 
Press ▲▼ to select [Computer 1]. 
1  ) 
Press ► to access the submenu.
2  ) 
Press ▲▼ to select RGB, Component 
3  ) 
or RGB(Scart) and then press the 
 button.
Computer 2: RGB
Press ▲▼ to select [Computer 2 (RGB)] 
and then press the  button. 
 
JComputer System Selection
This...

Page 44

Input menu
44 - ENGLISH
Settings
Component
 Auto
        The projector automatically detects an 
incoming video signal, and adjusts itself to 
optimize its performance.
  COMPONENT VIDEO SIGNAL FORMAT
        If the projector cannot reproduce proper video 
image, select a specific component video 
signal format among [480i], [576i], [480p], 
[576p], [720p], [1 035i] and [1 080i].
Press ▲▼ to select [System].
1  ) 
Press ► or the  button to 
2  ) 
access the submenu.
Press ▲▼ to select the desired...

Page 45

ENGLISH - 45
Settings
AUTO PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Auto PC adj.
Auto PC adjustment function is provided to 
automatically adjust Fine sync, Total dots, Horizontal 
and Vertical positions to conform to your computer.
Press ▲▼ to select [Auto PC adj.] and 
then press the  button. 
Please wait... 
z appears while the Auto PC 
adjustment is in process.
To store...

Page 46

46 - ENGLISH
Settings
Manual PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Some computers employ special signal formats 
which may not be tuned by Multi-scan system of this 
projector.  Manual PC adjustment enables you to 
precisely adjust several parameters to match those 
signal formats. The projector has 10 independent 
memory areas to store those parameters manually 
adjusted. It...

Page 47

Manual PC adjust
ENGLISH - 47
Settings
Current mode
Press ▲▼ to select [Current mode].
1  ) 
Press ► or the  button  to 
2  ) 
enter the next submenu to show
 
H-sync freq. and V-sync freq. of the 
connected computer.
Clamp
Press ▲▼ to select [Clamp].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the clamp level.
3  ) 
When the image has dark bars, try this  
z
adjustment.
Display area H
Press ▲▼ to select [Display area H].
1  ) 
Press the  button  to display...

Page 48

48 - ENGLISH
Settings
Image select 
Select [Image select] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Dynamic
For viewing pictures in a bright room.
Press ▲▼ to select [Dynamic] and then 
press the  button.
Standard
Normal picture mode preset on the projector.
Press ▲▼ to select [Standard] and then 
press the  button.
Real
Picture mode with improved halftone for graphics. 
Press ▲▼ to select [Real] and then press...

Page 49

ENGLISH - 49
Settings
Select [Image adjust] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Note
Make sure you selected [Store] after adjusting settings. 
 
z
Some settings can not be stored if not registered with 
[Store] function
Contrast
Press ▲▼ to select [Contrast].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the setting value.
3  ) 
Operation AdjustmentAdjustment...

Page 50

Image adjust
50 - ENGLISH
Settings
Color temp.
Press ▲▼ to select [Color temp.].
1  ) 
Press the  button to display 
2  ) 
the adjustment dialog box.
Press ◄► to select the desired Color 
3  ) 
temp. level.
You can select the desired [Color temp.] from  
z
[XLow], [Low], [Mid] or [High].
Note
[Color temp.] level displays [Blackbord] or [Colorboard] 
 
z
when the [Blackboard(Green)] or [Colorboard] is selected 
in the [Image select] menu.
Red 
Press ▲▼ to select [Red].
1  ) 
Press the  button  to display...

Start reading Panasonic LCD Projector Pt Vw435NE Operating Instructions

Related Manuals for Panasonic LCD Projector Pt Vw435NE Operating Instructions

All Panasonic manuals