Panasonic LCD Projector Pt Vw435NE Operating Instructions

							Menu Navigation
ENGLISH - 41
Settings
Main menu
The main menu consists of the following 9 menu 
items.
When a main menu item is selected, the screen 
changes to a submenu selection screen.
Input
PC adjust
Image select
Image adjust
Screen
Sound
Setting
Information
Network
Sub menu
The sub-menu screen of the selected main menu 
appears, and you can set and adjust the various items 
in the submenu.
Input [  
J ]
Sub-menu item
Factory defaultPage
Computer 1 RGB43
Computer 2 RGB43
HDMI  -43
Video  -43
S-video  - 43
Network - 44
PC adjust [  
J ]
Sub-menu item
Factory defaultPage
AUTO PC adj. -  45
Fine sync. -  46
Total dots -  46
Horizontal -  46
Sub-menu item Factory defaultPage
Vertical -  46
Current mode - 47
Clamp - 47
Display area H - 47
Display area V - 47
Reset  - 47
Mode free - 47
Store  - 47
Note
This function will be available when the input source  
 
z
come from computer.
Image select [  
J ]
Sub-menu item
Factory defaultPage
Dynamic -48
Standard - 48
Real - 48
Cinema - 48
Blackboard(Green) -48
Colorboard Red48
Image 1-4 -48
Image adjust [  ]
Sub-menu item Factory defaultPage
Contrast 3249
Brightness 3249
Color*
132 49
Tint*
132 49
Iris -49
Color temp. -50
Red 3250
Green 3250
Blue 3250
Daylight View -50
Sharpness 851
Gamma 851
Noise reduction*
1L 1 51
Progressive*
1L 1  51
Reset -51
Store - 51
When input video signal to the projector, these 
*1 : 
functions will be available. 
						

							Menu Navigation
42 - ENGLISH
Settings
Screen [  ]
Sub-menu itemFactory defaultPage
Normal - 52
Full - 52
Wide (16:9) - 52
Zoom - 52
True*
1-  52
Natural wide*
2- 52
Custom - 52
Custom adj. - 53
Digital zoom +*
1-  53
Digital zoom -*
1-  53
Keystone Store 53
Ceiling Off 54
Rear Off 54
Screen aspect*
2Default(16:10) 54
Reset - 54
When input computer signal to the projector, these 
*1 : 
functions will be available.
PT-VW435NE Only.
*2 : 
Sound [  
J ]
Sub-menu item
Factory DefaultPage
Volume 3255
Mute Off55
MIC Off55
MIC gain 3255
Standby MIC out Off55
Setting [  
J ]
Sub-menu item
Factory DefaultPage
Language English56
Menu position Center56
Auto setup - 56
Background Blue 57
Display On57
Logo -57
HDMI setup - 58
USB terminal Display58
Pointer Spotlight L58
Terminal Computer 258
Power management Shutdown59
Direct on Off59
Standby mode Eco59
P-timer Count up59
Closed caption Off60
Lamp power Normal60
Remote control ALL60
Sub-menu item Factory DefaultPage
Security -61
Fan L 261
Fan control Off61
Video delay control  Off62
Filter counter -62
Emulate Default62
Warning log -63
Factory default -63
Information [  
J ]
Sub-menu item
Factory defaultPage
Input -64
System -64
H-sync freq. -64
V-sync freq. -64
Screen -64
Language -64
Lamp power -64
Lamp runtime -64
Power management -64
Key lock - 64
PIN code lock -64
Remote control -64
Serial number -64
 
JNetwork [  ]
Sub-menu item
Factory defaultPage
Wired LAN -65
Wireless LAN -66
Wireless detailed setup -66
Projector name -69
Password Off70
Network control On70
Live mode cut in -70
Multi-live -70
Network status -70
AMX D.D. Off71
Room View Off71
Memory viewer -71
Network factory default -71 
						

							ENGLISH - 43
Settings
Input menu
Select [Input] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Computer 1: RGB/Component 
/RGB (Scart) 
Press ▲▼ to select [Computer 1]. 
1  ) 
Press ► to access the submenu.
2  ) 
Press ▲▼ to select RGB, Component 
3  ) 
or RGB(Scart) and then press the 
 button.
Computer 2: RGB
Press ▲▼ to select [Computer 2 (RGB)] 
and then press the  button. 
 
JComputer System Selection
This projector automatically tunes to various types 
of computers with its Multi-scan system and Auto 
PC Adjustment. If a computer is selected as a signal 
source, this projector automatically detects the signal 
format and tunes to project a proper image without 
any additional settings. (Signal formats provided in 
this projector are shown on pages 108-111.)
 
       When the projector can not recognize 
the connected signal conforming to the
 
provided PC Systems, [Auto] is displayed 
on the System Menu box and the Auto 
PC adjustment function works to display 
proper images. If the image is not projected 
properly, a manual adjustment is required.
                   There is no signal input from the computer. 
Check the connection between your 
computer and the projector.
                 
The preset system is manually adjusted in 
the PC adjust Menu. The adjusted data can 
be stored in  Mode 1-10. 
                  PC Systems provided in this projector is 
chosen. The projector chooses a proper 
system provided in the projector and 
displays it.
* Mode 1 and SVGA 1 are examples.  
Press ▲▼ to select [System].
1  ) 
Press ► or the  button to 
2  ) 
access the submenu.
Press ▲▼ to select the desired system.
3  ) 
HDMI
Press ▲▼to select [HDMI] and then press 
the  button. 
Video
Press ▲▼ to select [Video] and then 
press the  button.
S-video
Press ▲▼ to select [S-video] and then 
press the  button. 
 
JVideo System Selection
Video or S-video
 
Auto
        The projector automatically detects an 
incoming video system, and adjusts itself to 
optimize its performance.
        When Video System is [PAL-M] or [PAL-N], 
select the system manually.
 
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
      If the projector cannot reproduce proper video 
image, select a specific broadcast signal 
format from among [PAL], [SECAM], [NTSC], 
[NTSC 4.43], [PAL-M] and [PAL-N].
AUTO
- - - -
Mode 1
SVGA 1 
						

							Input menu
44 - ENGLISH
Settings
Component
 Auto
        The projector automatically detects an 
incoming video signal, and adjusts itself to 
optimize its performance.
  COMPONENT VIDEO SIGNAL FORMAT
        If the projector cannot reproduce proper video 
image, select a specific component video 
signal format among [480i], [576i], [480p], 
[576p], [720p], [1 035i] and [1 080i].
Press ▲▼ to select [System].
1  ) 
Press ► or the  button to 
2  ) 
access the submenu.
Press ▲▼ to select the desired system.
3  ) 
Note
When the [Input Search] function is set to [On 1] or [On  
z
2] in the [Auto setup] function, the input signal will be 
searched automatically. 
The AV System Menu cannot be selected when selecting 
 
z
[RGB (Scart)].
Network
Press ▲▼to select [Network] and then 
press the  button. 
Note
For details please refer to Network operations on page  
z
65-91. 
						

							ENGLISH - 45
Settings
AUTO PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Auto PC adj.
Auto PC adjustment function is provided to 
automatically adjust Fine sync, Total dots, Horizontal 
and Vertical positions to conform to your computer.
Press ▲▼ to select [Auto PC adj.] and 
then press the  button. 
Please wait... 
z appears while the Auto PC 
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment 
can be stored in the projector. Once the parameters 
are stored, the setting can be done just by selecting a 
Mode (1–10) in the PC System Menu (see page 43). 
See also [Store] on page 47.
Attention
[Fine sync], [Total dots], [Horizontal] and [Vertical]  
z
position of some computers cannot be fully adjusted 
with the Auto PC adjustment function. When the image 
is not provided properly with this operation, manual 
adjustments are required (
Æpages 46-47). 
The Auto PC adjustment cannot be operated when 
 
z
[480i], [576i], [480p], [576p], [720p], [1 035i] or [1 080i] is 
selected in the PC System Menu (
Æpage 43), or when 
the signal is coming from the HDMI terminal. 
						

							46 - ENGLISH
Settings
Manual PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Some computers employ special signal formats 
which may not be tuned by Multi-scan system of this 
projector.  Manual PC adjustment enables you to 
precisely adjust several parameters to match those 
signal formats. The projector has 10 independent 
memory areas to store those parameters manually 
adjusted. It allows you to recall the setting for a 
specific computer.
Fine sync
Press ▲▼ to select [Fine sync].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the value.
3  ) 
The value can be adjusted from 0 to 31. 
z
Total dots
Press ▲▼ to select [Total dots].
1  ) 
Press the  button to display 
2  ) 
the adjustment dialog box.
Press ◄► to adjust the value.
3  ) 
Horizontal
Press ▲▼ to select [Horizontal].
1  ) 
Press the  button to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the horizontal 
3  ) 
picture position.
For horizontal (right and left)  
J
adjustment
Operation
Adjustment
Press ◄. The picture 
position 
moves to the 
right.
Press ►.The picture 
position 
moves to the 
left.
Vertical
Press ▲▼ to select [Vertical].
1  ) 
Press the  button to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the vertical picture 
3  ) 
position.
For vertical (up and down)  
J
adjustment
Operation
Adjustment
Press 
►. The picture 
position 
moves up.
Press ◄.The picture 
position 
moves down. 
						

							Manual PC adjust
ENGLISH - 47
Settings
Current mode
Press ▲▼ to select [Current mode].
1  ) 
Press ► or the  button  to 
2  ) 
enter the next submenu to show
 
H-sync freq. and V-sync freq. of the 
connected computer.
Clamp
Press ▲▼ to select [Clamp].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the clamp level.
3  ) 
When the image has dark bars, try this  
z
adjustment.
Display area H
Press ▲▼ to select [Display area H].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the horizontal area 
3  ) 
displayed by this projector.
Display area V
Press ▲▼ to select [Display area V].
1  ) 
Press the  button  to display 
2  ) 
the dialog box .
Press ◄► to adjust the vertical area 
3  ) 
displayed by this projector.
Reset
To reset the adjusted data, all adjustments will return 
to their previous figures.
Press ▲▼ to select [Reset].
1  ) 
Press the  button.
2  ) 
A confirmation box appears and then select [Yes]. 
z 
Mode free
Press ▲▼ to select [Mode free].
1  ) 
Press ► or the  button to 
2  ) 
enter the next submenu.
Move the highlight to the mode that you want to  
z
clear and then press the  button.
A confirmation box appears and then select [Yes]. 
z
Store
Press ▲▼ to select [Store].
1  ) 
Press ► or the  button to 
2  ) 
enter the next submenu.
Move the highlight to one of the Modes 1 to 10  
z
in which you want to store, and then press the 
 button. 
A confirmation box appears and then select 
 
z
[Yes]. 
						

							48 - ENGLISH
Settings
Image select 
Select [Image select] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Dynamic
For viewing pictures in a bright room.
Press ▲▼ to select [Dynamic] and then 
press the  button.
Standard
Normal picture mode preset on the projector.
Press ▲▼ to select [Standard] and then 
press the  button.
Real
Picture mode with improved halftone for graphics. 
Press ▲▼ to select [Real] and then press 
the  button.
Cinema
Picture mode adjusted with fine tone.
Press ▲▼ to select [Cinema] and then 
press the  button.
Blackboard(Green)
For the image projected on a blackboard.
Press ▲▼ to select [Blackboard(Green)] 
and then press the  button.
This mode helps enhance the image projected  
z
on a blackboard. This is mainly effective on a 
green colored board, not truly effective on a 
black colored board.
Colorboard
For the image projected on a colorboard.
Press ▲▼ to select [Colorboard].
1  ) 
Press ► or the  button to 
2  ) 
display the submenu.
Press ▲▼ to select a color, and press 
3  ) 
the  button. 
At the time of simple projection on the colored  
z
wall, you can get the close color image to the 
color image projected on a white screen by 
selecting the similar color to the wall color from 
the preset four colors (Red, Blue, Yellow and 
Green).
Image 1-4
For viewing with the user preset image mode in the 
Image adjust Menu. This Image memory is provided 
in each computer, component and video input source.
Press ▲▼ to select [Image 1-4] and then 
press the  button. 
						

							ENGLISH - 49
Settings
Select [Image adjust] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Note
Make sure you selected [Store] after adjusting settings. 
 
z
Some settings can not be stored if not registered with 
[Store] function
Contrast
Press ▲▼ to select [Contrast].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the setting value.
3  ) 
Operation AdjustmentAdjustment 
range
Press ►. increase the contrast Maximum 
value 63
Press ◄. decrease the 
contrast Minimum 
value 0
Brightness
Press ▲▼ to select [Brightness].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the setting value.
3  ) 
Operation AdjustmentAdjustment 
range
Press ►. increase the 
brightness Maximum 
value 63
Press ◄. decrease the 
brightness Minimum 
value 0
Color
Press ▲▼ to select [Color].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the setting value.
3  ) 
Operation AdjustmentAdjustment 
range
Press ►. increase the 
intensity of the color Maximum 
value 63
Press ◄. decrease the 
intensity of the color Minimum 
value 0
Note
When input video signal to the projector, [Color] will be 
 
z
available.
Tint 
Press ▲▼ to select [Tint].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the tint value to 
3  ) 
get a proper color balance.
Adjustments can be made between 
z
 0 and 63.
Note
When you select [NTSC] or [NTSC4.43] in System menu 
 
z
under Video input signal, [Tint] will be available.
Iris    
Press ▲▼ to select [Iris].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to select [Off] or [On].
3  ) 
Off Disabled
On Contrast is prioritized over brightness
Image adjust 
						

							Image adjust
50 - ENGLISH
Settings
Color temp.
Press ▲▼ to select [Color temp.].
1  ) 
Press the  button to display 
2  ) 
the adjustment dialog box.
Press ◄► to select the desired Color 
3  ) 
temp. level.
You can select the desired [Color temp.] from  
z
[XLow], [Low], [Mid] or [High].
Note
[Color temp.] level displays [Blackbord] or [Colorboard] 
 
z
when the [Blackboard(Green)] or [Colorboard] is selected 
in the [Image select] menu.
Red 
Press ▲▼ to select [Red].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the setting value.
3  ) 
Operation Adjustment Adjustment 
range
Press ►. deepen red tone Maximum 
value 63
Press ◄. lighten red tone Minimum 
value 0
Green
Press ▲▼ to select [Green].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the setting value.
3  ) 
Operation Adjustment Adjustment 
range
Press ►. deepen green 
tone Maximum 
value 63
Press ◄. lighten green 
tone Minimum 
value 0
Blue 
Press ▲▼ to select [Blue].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to adjust the setting value.
3  ) 
Operation Adjustment Adjustment 
range
Press ►. deepen blue tone Maximum 
value 63
Press ◄. lighten blue tone Minimum 
value 0
Daylight View 
This function uses an ambient light sensor to detect 
the room’s light intensity and automatically adjust the 
projector output to ensure a bright presentation.
Press ▲▼ to select [Daylight View].
1  ) 
Press the  button  to display 
2  ) 
the adjustment dialog box .
Press ◄► to select the desired item.
3  ) 
Auto Always works and improve image 
performance in brightly lit places.
On Enabled 
Off Disabled
Note When [Rear] is set to [On], [Auto] is disabled.
 
z
When this function is set to [On] or [Auto], the 
 
z
[Sharpness] is disabled.