Panasonic LCD Projector Pt Vw435NE Operating Instructions
Have a look at the manual Panasonic LCD Projector Pt Vw435NE Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 77
Network
ENGLISH - 77
Settings
Error information page
J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen,
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
•
When [FAILED] has appeared for an item
Parameter Description
FA NTrouble has occurred in the fan or its...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-76.png "Page 77
Network
ENGLISH - 77
Settings
Error information page
J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen,
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
•
When [FAILED] has appeared for an item
Parameter Description
FA NTrouble has occurred in the fan or its...")
![Page 78
Network
78 - ENGLISH
Settings
Basic control page
J
To move from another page, click [Projector control], then [Basic control].
1
Power standby/on control
2 Use these to select the input signals
3 Volume adjust 4
Switches image mode
5 Operation of AV mute
5
4
3 2 1
Detail control page
J
Click [Projector control], then [Advanced control] to display the Detail control page.
1
Execute Auto setup function
2 Operations on Screen mode
3 Operations on Keystone function
4 Operations on...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-77.png "Page 78
Network
78 - ENGLISH
Settings
Basic control page
J
To move from another page, click [Projector control], then [Basic control].
1
Power standby/on control
2 Use these to select the input signals
3 Volume adjust 4
Switches image mode
5 Operation of AV mute
5
4
3 2 1
Detail control page
J
Click [Projector control], then [Advanced control] to display the Detail control page.
1
Execute Auto setup function
2 Operations on Screen mode
3 Operations on Keystone function
4 Operations on...")
![Page 79
Network
ENGLISH - 79
Settings
Network config page
J
You can change network settings on projector when connecting with the administrator authority.
LAN settings
z
Click [Detailed set up] in the menu.
1 )
Click [Change] to change the LAN settings.
2 )
zTo return to the previous window, click [Back].
Complete the detailed settings and
3 )
click [Next].
When [Next] is clicked, the next page appears, enabling
z
you to complete the detailed settings as desired.
Settings performed here...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-78.png "Page 79
Network
ENGLISH - 79
Settings
Network config page
J
You can change network settings on projector when connecting with the administrator authority.
LAN settings
z
Click [Detailed set up] in the menu.
1 )
Click [Change] to change the LAN settings.
2 )
zTo return to the previous window, click [Back].
Complete the detailed settings and
3 )
click [Next].
When [Next] is clicked, the next page appears, enabling
z
you to complete the detailed settings as desired.
Settings performed here...")
![Page 80
Network
80 - ENGLISH
Settings
Ping test page
J
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test. 2
1](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-79.png "Page 80
Network
80 - ENGLISH
Settings
Ping test page
J
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test. 2
1")
![Page 81
Network
ENGLISH - 81
Settings
E-mail set up page
J
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1
Select Enable to use the e-mail function.
2 Enter the IP address or server name of the
e-mail server (SMTP). The DNS server must be
set if the server name is entered.
3 Enter the...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-80.png "Page 81
Network
ENGLISH - 81
Settings
E-mail set up page
J
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1
Select Enable to use the e-mail function.
2 Enter the IP address or server name of the
e-mail server (SMTP). The DNS server must be
set if the server name is entered.
3 Enter the...")
![Page 82
Network
82 - ENGLISH
Settings
E-mail set up page (continued)
J
9
Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS: Select [NORMAL] or [SIMPLE].
ERROR: An error is detected by self-diagnosis.
LAMP RUNTIME: Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field. 10
9
Authentication set up page
J
The POP/SMTP server is set on...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-81.png "Page 82
Network
82 - ENGLISH
Settings
E-mail set up page (continued)
J
9
Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS: Select [NORMAL] or [SIMPLE].
ERROR: An error is detected by self-diagnosis.
LAMP RUNTIME: Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field. 10
9
Authentication set up page
J
The POP/SMTP server is set on...")
![Page 83
Network
ENGLISH - 83
Settings
Contents of mail sent
J
Mail with the contents shown below is sent when the e-mail settings have\
z
been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Ty pe : PT-VX505N
Serial No : 000000000
----- E-mail setup data -----
TEMPER ATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INTAKE AIR TEMPER ATURE Over [ 32degC / 89degF ]
ERROR
[ OFF ]
LA MP RUNTIME [ OFF ] at REM...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-82.png "Page 83
Network
ENGLISH - 83
Settings
Contents of mail sent
J
Mail with the contents shown below is sent when the e-mail settings have\
z
been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Ty pe : PT-VX505N
Serial No : 000000000
----- E-mail setup data -----
TEMPER ATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INTAKE AIR TEMPER ATURE Over [ 32degC / 89degF ]
ERROR
[ OFF ]
LA MP RUNTIME [ OFF ] at REM...")
![Page 84
Network
84 - ENGLISH
Settings
Mail with the contents shown below is sent when an error has occurred.
z
=== Panasonic projector report(ERROR) ===
Projector Ty pe : PT-VX505N
Serial No : 000000000
----- check system -----
FAN
[ OK ]
INTAKE AIR TEMPER ATURE [ OK ]
EXHAUST AIR TEMPER ATURE
[ OK ]
OPTICS MODULE TEMPER ATURE [ OK ]
LA MP REM AIN TIME [ OK ]
LA MP STATUS
[ FAILED ]
APERTURE...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-83.png "Page 84
Network
84 - ENGLISH
Settings
Mail with the contents shown below is sent when an error has occurred.
z
=== Panasonic projector report(ERROR) ===
Projector Ty pe : PT-VX505N
Serial No : 000000000
----- check system -----
FAN
[ OK ]
INTAKE AIR TEMPER ATURE [ OK ]
EXHAUST AIR TEMPER ATURE
[ OK ]
OPTICS MODULE TEMPER ATURE [ OK ]
LA MP REM AIN TIME [ OK ]
LA MP STATUS
[ FAILED ]
APERTURE...")
![Page 85
Network
ENGLISH - 85
Settings
Change Password page
J
Click [Change password].
1
Administrator
2 User
Administrator mode
1 Account
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re- enter for
confirmation)
7 Button for executing password change
User account
1 Account
2 New user name input field
3 New password input field
4 New password input field (re- enter for...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-84.png "Page 85
Network
ENGLISH - 85
Settings
Change Password page
J
Click [Change password].
1
Administrator
2 User
Administrator mode
1 Account
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re- enter for
confirmation)
7 Button for executing password change
User account
1 Account
2 New user name input field
3 New password input field
4 New password input field (re- enter for...")
![Page 86
Network
86 - ENGLISH
Settings
CRSTRON RoomView page
J
You can monitor or control the projector using RoomView.
To display the operation page of RoomView from Web Control screen, access with the administrator rights is
required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.)
When you click [CRESTRON RoomView], the RoomView operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this...](http://img.usermanuals.tech/thumb/58/76008/w64_pt-vw435_en_om_d-85.png "Page 86
Network
86 - ENGLISH
Settings
CRSTRON RoomView page
J
You can monitor or control the projector using RoomView.
To display the operation page of RoomView from Web Control screen, access with the administrator rights is
required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.)
When you click [CRESTRON RoomView], the RoomView operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this...")
Network
ENGLISH - 81
Settings
E-mail set up page
J
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1
Select Enable to use the e-mail function.
2 Enter the IP address or server name of the
e-mail server (SMTP). The DNS server must be
set if the server name is entered.
3 Enter the e-mail address of the projector.
(maximum 63 characters)
4 The user can enter the location of, for
example, the installed projector so that the
recipient may easily identify the originator of
the e-mail.
(maximum 63 characters) 5
The user can modify the minimum time
interval of temperature warning mail. The
default value is 60 minutes. In this case, the
user cannot send another mail for 60 minutes
after sending previous temperature warning
mail even the set warning temperature is
reached again.
6 Select the temperature of the intake sensor at
which to send a warning message.
7
Enter the E-mail Address1 of your desired recipient.
8 Select the conditions for sending e-mail.
MAIL CONTENTS: Select [NORMAL] or [SIMPLE].
ERROR: An error is detected by self-diagnosis.
LAMP RUNTIME: Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.
6 5 4 3
2
1
8
7
Network
82 - ENGLISH
Settings
E-mail set up page (continued)
J
9
Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS: Select [NORMAL] or [SIMPLE].
ERROR: An error is detected by self-diagnosis.
LAMP RUNTIME: Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field. 10
9
Authentication set up page
J
The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions.
Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page.
1
Select the authentication method specified by
your Internet service provider.
2 Set this if SMTP authentication has been
selected.
3 POP server name field
Available input characters:
Alphanumeric characters (A - Z, a - z, 0 - 9),
hyphen (-), period (.)
4 POP/SMTP server user name field 5
POP/SMTP server password field
6 Enter the port number for the SMTP server
(normally “25”).
7 Enter the port number for the POP server
(normally “110”).
8 Button to update settings
87
6
5 4 3 2 1
Network
ENGLISH - 83
Settings
Contents of mail sent
J
Mail with the contents shown below is sent when the e-mail settings have\
z
been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Ty pe : PT-VX505N
Serial No : 000000000
----- E-mail setup data -----
TEMPER ATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INTAKE AIR TEMPER ATURE Over [ 32degC / 89degF ]
ERROR
[ OFF ]
LA MP RUNTIME [ OFF ] at REM AIN [ 400] H
LA MP RUNTIME [ OFF ] at REM AIN [ 200] H
INTAKE AIR TEMPER ATURE
[ OFF ]
----- check system -----
FAN
[ OK ]
INTAKE AIR TEMPER ATURE [ OK ]
EXHAUST AIR TEMPER ATURE [ OK ]
OPTICS MODULE TEMPER ATURE [ OK ]
LA MP REM AIN TIME [ OK ]
LA MP STATUS [ OK ]
APERTURE (CONTR AST-SHUTTER) [ OK ]
(Error code 00 00 00 00 00 00 00 00)
Intake air temperature :[ 31 degC / 87 degF ]
Exhaust air temperature :[ 37 degC / 98 degF ]
Optics module temperature :[ 39 degC / 102 degF ]
PROJECTOR RUNTIME 1 H
LA MP ECO 500 H
LA MP NOR M AL 300 H
LA MP REM AIN 2400 H
-------- Current status ---------
M AIN VERSION 1.00
NETWORK VERSION 1.00
LA MP STATUS LA MP=ON
INPUT RGB
SIGNAL NA ME XGA6
SIGNAL FREQUENCY 0.00kHz / 0.00Hz
----- Wired Network configuration -----
DHCP Client OFF
IP address 192.168.10.100
M AC address 04:20:9A:00:00:00
----- Memo -----
Network
84 - ENGLISH
Settings
Mail with the contents shown below is sent when an error has occurred.
z
=== Panasonic projector report(ERROR) ===
Projector Ty pe : PT-VX505N
Serial No : 000000000
----- check system -----
FAN
[ OK ]
INTAKE AIR TEMPER ATURE [ OK ]
EXHAUST AIR TEMPER ATURE
[ OK ]
OPTICS MODULE TEMPER ATURE [ OK ]
LA MP REM AIN TIME [ OK ]
LA MP STATUS
[ FAILED ]
APERTURE (CONTR AST-SHUTTER) [ OK ]
(Error code 00 40 00 00 00 00 00 08)
Intake air temperature :[ 31 degC / 87 degF ]
Exhaust air temperature :[ 37 degC / 98 degF ]
Optics module temperature :[ 39 degC / 102 degF ]
PROJECTOR RUNTIME 1 H
LA MP ECO 500 H
LA MP NOR M AL 300 H
LA MP REM AIN 2400 H
-------- Current status ---------
M AIN VERSION 1.00
NETWORK VERSION 1.00
LA MP STATUS LA MP=OFF
INPUT NETWORK
----- Wired Network configuration -----
DHCP Client OFF
IP address 192.168.10.100
M AC address 04:20:9A:00:00:00
----- Memo -----
Command port set up page
J
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1
Input the port number to be used with command control
2 Setting update button
1
2
Network ENGLISH - 85 Settings Change Password page J Click [Change password]. 1 Administrator 2 User Administrator mode 1 Account 2 Current user name input field 3 Current password input field 4 New user name input field 5 New password input field 6 New password input field (re- enter for confirmation) 7 Button for executing password change User account 1 Account 2 New user name input field 3 New password input field 4 New password input field (re- enter for confirmation) 5 Button for executing password change User mode A user can change password only. 1 Current password input field 2 New password input field 3 New password input field (re- enter for confirmation) 4 Button for executing password change Note When changing the administrator account, both “Current user name” and “Current password” are required. z No account is not available . z Administrator account and user account should be differed. z 2 1 7 6 5 4 3 2 1 5 4 3 2 1 4 3 2 1
Network
86 - ENGLISH
Settings
CRSTRON RoomView page
J
You can monitor or control the projector using RoomView.
To display the operation page of RoomView from Web Control screen, access with the administrator rights is
required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.)
When you click [CRESTRON RoomView], the RoomView operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this page does
not appear. In this case, return to the previous page by clicking [Back] in the operation page.
Operation page
1
Tools, Info, Help
Exit the page when the password has changed and switches the pages for tools, information, help using
the tab.
2 POWER
Switches between on and off of the power.
3 VOL DOWN, AV MUTE, VOL UP
Sets the volume, AV mute. When the power of the projector is turned off, VOL DOWN, AV MUTE and
VOL UP are not available.
4 Input Select
Sets the input selection. When the power of the
projector is turned off, this operation is not available.
5 Operation buttons on the menu screen
Operates on the menu screen.
6 Freeze, image quality adjustment
Sets freeze, image quality details.
7 Back
Returns to the previous page.
Tools page
Click Tools on the operation page.
1
Control system
Sets the information required for the communication with the controller that is connected to the projector.
2 User Password
Sets the password for the user rights in the operation page of RoomView.
3 Admin Password
Sets the password for the administrator rights in the operation page of RoomView.
4 Network status
Displays the setting of wired LAN.
DHCP: Displays the value in the current setting.
IpAddres: Displays the value in the current setting.
SubnetMask: Displays the value in the current setting.
DefaultGateway:
Displays the value in the current setting.
DNSServer: Displays the value in the current setting.
5 Exit
Return to the operation page.
1
2
34
5
6
7
1
2
3
4 5
Network
ENGLISH - 87
Settings
Info page
Click Info on the operation page.
1 Projector name
Displays the name of the projector.
2 Mac Address
Displays the MAC address
. “Glossary” (Æpage 115 – 116)
3
Resolution
Displays the resolution of the projector.
4 Lamp Hours
Displays the lamp usage time (converted value).
5 Power Status
Displays the status of the power.
6 Source
Displays the selected video input.
7 Projector Position
Displays the projection method of the projector.
8 Lamp Mode
Displays the lamp mode.
9 Error Status
Displays the error status.
10 Exit
Return the operation page.
User mode
A user can change password only.
1
Help Desk
Sends or receive messages to the administrator who
uses Crestron RoomView.
1
2
4
3 5
6
7
8
9
10
1
Network 88 - ENGLISH Settings Memory Viewer function The Memory Viewer function is to make a presentation or project an image without using computers or some other external equipment. You do not have to carry a computer or other equipment to project images. Store images on a dedicated USB (Universal Serial Bus) thumb drive and insert it into the USB port (Series A) of the projector, then you can project those images.Which images can be projected with the Memory Viewer function? With the Memory Viewer function, you can project images in these formats below. • Bitmap data • JPEG data • Text data JPEG data used with Memory Viewer Memory viewer does not support the resolution of image greater than 8191 x 8191 pixels. Text data used with Memory Viewer Memory viewer supports the text file with the ASCII format for single byte. Other text formats cannot be supported. Back up the data It is recommended that important data to edit with Network Viewer (See Wireless Manager mobile edition 6.0) and store in USB thumb drive should be stored in other media in advance. We are not responsible for any data losses or damages resulting from use of the Memory Viewer function. USB thumb drive for the Memory Viewer function J Commercially available USB thumb drives can be used for this Memory Viewer function. The USB port is compatible with USB thumb drive formatted with FAT16 or FAT32. It is not compatible with other formats. Please note that when you format the USB thumb drive. Inserting the USB thumb drive J Insert the USB thumb drive directly into the USB port on the rear terminal of the projector as shown in the figure below. CAUTION on insertion and removal of the USB thumb drive Please note following points to insert and remove the USB thumb drive. The indicator of the USB thumb drive will be blinking when it is inserted to the projector or while the projector is reading out the data. Do not remove the USB thumb drive while it is blinking. When using a USB thumb drive without indicator, you cannot recognize when the projector reading out the data. Please remove it from the projector after closing the memory viewer function or turning off the projector. Do not install and remove the USB thumb drive frequently. Remove the USB thumb drive at least 5 seconds after installation. And install at least 5 seconds after removal. While installing or removing the USB thumb drive, the projector is in switching period for those operation. MONITO R OUT COMPUTER 2 IN COMPUTER 1 IN SERIAL INVIDEO IN AUDIO IN USB B USB A LAN VIEWER MOUSE CONTROL DISPLAY / MIC IN S-VIDEO IN COMPUTERAUDIO IN V ARIABLE AUDIO OUT R L AC IN ~ USB port (Series A) USB thumb drive Note: When inserting, confirm the direction of the plug not to damage the terminal.
Network
ENGLISH - 89
Settings
CAUTION on Handling and Storing the USB thumb drive
Do not put USB thumb drive or its cap within close reach of children. Swallowing them may cause
suffocation.
If the smoke or questionable odor rise, turn off the peripheral equipment and contact yourdealer.
Do not put water, chemical or oil to the USB thumb drive. It may cause short out or fire.
Do not put foreign objects or put metal objects to the USB terminal. Static electricity may cause data loss or
data corruption.
Do not remove the USB thumb drive from the computer or the projector while the USB thumb drive is
reading out or writing the data. It may cause data loss or data corruption.
Do not store the USB thumb drive where high temperature, humid or dusty place or magnetizeditems are
around.
Direct start-up into the memory viewer mode
J
“Network”, and then an image stored in the root directory of the USB thumb drive is displayed on the screen.
* If the image file is not available in the root directory of the USB thumb drive, the memory viewer browser
window appears.
* When the projector is turned off and on while the USB thumb drive is left inside in the memory viewer
mode, the projector starts into the memory viewer mode and an image stored in the USB thumb drive is
displayed on the screen.
When you press button in the memory viewer mode, the memory viewer browser
window as shown on page 90 appears on the screen.
When you remove the USB thumb drive during operating the projector in the memory viewer mode,
the input source returns to the previous one selected just before inserting the USB thumb drive.
Remote Control
Note
During accessing to the USB thumb drive, do not turn off the power or eject the USB thumb drive because the
data in the USB thumb drive might get damaged. During accessing, the USB thumb drive is blinking.
The USB thumb drive allows you to insert or remove regardless of the power status of the projector.
The direct start-up into the memory viewer mode may not operate when the USB thumb drive is inserted
immediately after being removed.
During in [Multi live] mode of “Wireless Manager ME6.0”, the direct start-up into the memory viewer mode is
not available. After terminating [Multi live], insert the USB thumb drive, or operate “Memory viewer” (
Æpage
71) . AUTO SETUP/CANCEL
button
Network 90 - ENGLISH Settings Displaying the memory viewer browser window J When you press button in the memory viewer mode, following browser window “Thumbnail” or “Filename list” appears on the screen. Filename list display Displays current directory path Menu Moves to upper directory Thumbnail display Displays current directory path Menu Moves to upper directory Even before the completion of thumbnail images drawing, the image selection is available by pressing point ▲▼ ◄ ► buttons. (Though thumbnail images drawing cannot be interrupted by pressing any of point ▲▼ ◄ ► buttons, the operation is valid.) A file more than 10MB is not displayed as thumbnails. Icons are displayed in substitution for thumbnails. Only JPEG, Bitmap and Text icons can be supported in the browser screen. Icon indication Folder icon. Displays the contents of the selected folder with button Top directory icon. Moves to upper directory with button JPEG file icon Bitmap file icon Text file icon View Set ExitMemory viewer 1.jpg 2.jpg3.jpg 4.jpg 5.jpg6.jpg 7.jpg 8.jpg 9.jpg10.jpg.. View Set ExitMemory viewer n_capture PDP0909 New Folder.. Name Size File type Date modified movie_icons.bmp 312 KB Network.jpg 350 KB movie_1024.txt 222 KB movie1008.bmp 450 KB Network_330.jpg 1 KB MRA3102A.txt 250 KB File folder File folder File folder Bitmaps file JPEG Image Text file Bitmaps file JPEG Image Text file 2003/05/05 18:20 2004/11/19 18:20 2005/11/16 18:00 2006/12/12 12:20 2007/03/11 18:20 2008/01/25 15:24 2009/03/23 01:20 2011/09/12 00:35 2012/06/12 13:41