Panasonic LCD Projector Pt Vw435NE Operating Instructions

ENGLISH - 61
Settings
Setting
Security
This function allows you to use the Key lock and PIN 
code lock function to set the security for the projector 
operation.
Press ▲▼ to select [Security].
1  ) 
Press ► or the  button to 
2  ) 
access the submenu.
Key lock 
J
This function locks the control panel and remote 
control buttons to prevent operation by unauthorized 
persons.
Press ▲▼ to select the desired items 
1  ) 
as below.
Unlocked.
Lock the operation of the control 
panel. To unlock, use the remote...

Setting
62 - ENGLISH
Settings
When using the projector in the elevation of 
*3 : 
above 2 000 m and below 2 700 m, make sure 
[Fan control] is set to [On 2].
Note Failure to set the running speed of cooling fans 
 
z
properly may affect the projector life.
The fan noise becomes louder in [On 1] and [On 2].
 
z
Video delay control
This function allows you to make a digital processing 
of a projected image faster.
Press ▲▼ to select [Video delay 
1  ) 
control] and then Press the  
button.
Press ▲▼ to...

Setting
ENGLISH - 63
Settings
L785L785 series
LB/W series LB2 series, LB1 series,
LB75 series, LB80 series, 
LB90 series, ST10 series
F/W series FX400series, FW430 series, 
F100 series, FW100 series,
F200 series, F300 series,
FW300 series
LZ370 LZ370 series
Warning log
This function records anomalous operations while the 
projector is in operation and use it when diagnosing 
faults.
Press ▲▼ to select [Warning log].
1  ) 
Press ► or the  button to 
2  ) 
display the latest warning message.
Up to 10...

64 - ENGLISH
Settings
Select [Information] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Input Source Information 
Display 
The Information Menu is used for checking the status 
of the image signal being projected and the operation 
of the projector.
You can also Press the  button on the remote 
control to display the Information menu.
Input 
J
The selected input source is displayed.
System 
J
The selected system...

ENGLISH - 65
Settings
Network
Select [Setting] from the Main Menu (see 
“Navigating through the menu” on page 40), 
then select the item from the sub-menu.
Remote ControlControl Panel
Verifying the network information
When connecting the projector via the dedicated 
applications of "Wireless Manager mobile edition 6.0” 
or iPad / iPhone / iPod touch, the network number, the 
project name and ID of Wireless LAN are required. 
You can check these information by entering [Input 
Guide] or [Network...

Network
66 - ENGLISH
Settings
Note
Before using the DHCP server, make sure the DHCP 
 
z
server is already functioning.
For details of IP address, subnet mask, gateway and 
 
z
DNS, ask the network administrator
.
A wired LAN and wireless LAN can not be used in the 
 
z
same segment.
Wireless LAN
You can set the network number.
Press ▲▼ to select [Wireless LAN], 
1  ) 
and press  or ► button.
Select the number to be connected 
2  ) 
with the ▲▼ buttons.
Network number [Off], [S-DIRECT],  
z
[M-DIRECT],...

Network
ENGLISH - 67
Settings
Press ▲▼ to select an item, and 
2  ) 
change the setting according to the 
instructions.
Name change You can change the user 
name.
DHCP 
(DHCP client 
function)
ON: If a DHCP server 
exists in the 
network to which 
the projector is 
connected, the 
IP address will 
automatically be 
acquired.
OFF: If a DHCP server 
does not exist in 
the network to 
which the projector 
is connected, 
additionally set [IP 
address  
], [Subnet 
mask ] and 
[Default gateway ].
IP...

Network
68 - ENGLISH
Settings
WPA2-EAP 2
Select when the 
access point 
authentication method 
is WPA2-EAP 
1.
Encryption
 
z
Select the encryption 
method to be used for 
communication between 
the projector and the 
network.
NONE Select when transmit 
without encryption. It is 
selectable only when 
[Authentication] is [OPEN] 
or [SHARED].
WEP 
1Select when Encryption is 
W E P.
TKIP 
1
Select when Encryption is 
TKIP.
Selectable when 
[Authentication] is either 
[WPA-PSK], [WPA2-
PSK],  [WPA-EAP],...

Network
ENGLISH - 69
Settings
Set [EAP], [USER NAME], 
and [PASSWORD].
EAP 1:Select the EAP 
setup in the 
RADIUS server 
1. Types of 
EAP that can be 
selected are as 
follows.
PEAP 
1(MS-
CHAPv2 1), 
PEAP 1(GTC 1), 
EAP-TTLS 
1(MD5 1), 
EAP-TTLS 
1(MS-CHAPv2 1), EAP-FAST 1(MS-CHAPv2 1), EAP-FAST 1(GTC 1) 
USER 
NAME: Input a user 
name used for 
authentication 
(excluding 
spaces)
(maximum 64 
characters).
PAS S  
WORD: Input a password 
used for 
authentication 
(maximum 64...

Network
70 - ENGLISH
Settings
Password
By controlling connection with password setting, it is 
 
z
possible to prevent an external device from accidentally 
connecting and interrupting projection images, etc.
Set to [On] to perform password check when connecting 
 
z
with the projector using “Wireless Manager mobile edition 
6.0”. (Default : [Off])
When using the deliver image to all function or the 
 
z
delivered image deletion function of the “Multi Projector 
Monitoring & Control Software”, image...