Panasonic LCD Projector Pt Vw435NE Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Vw435NE Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
Technical Information
ENGLISH - 101
Appendix
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode)
J
Connection method
z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and
1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address : Obtain from MAIN MENU → [Network] → [Network status]
Port No. : Acquire from...](http://img.usermanuals.tech/thumb/58/76008/w300_pt-vw435_en_om_d-100.png "Page 101
Technical Information
ENGLISH - 101
Appendix
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode)
J
Connection method
z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and
1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address : Obtain from MAIN MENU → [Network] → [Network status]
Port No. : Acquire from...")
Technical Information ENGLISH - 101 Appendix Control commands via LAN When WEB Control administrator rights password is set (Protect mode) J Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector \ and 1 ) make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address : Obtain from MAIN MENU → [Network] → [Network status] Port No. : Acquire from...
Page 102
![Page 102
Technical Information
102 - ENGLISH
Appendix
When WEB Control administrator rights password is not set (Non-protect
J
mode)
Connection method
z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and
1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address : Obtain from MAIN MENU → [Network] → [Network status]
Port No. : Acquire from the WEB control...](http://img.usermanuals.tech/thumb/58/76008/w300_pt-vw435_en_om_d-101.png "Page 102
Technical Information
102 - ENGLISH
Appendix
When WEB Control administrator rights password is not set (Non-protect
J
mode)
Connection method
z
Obtain the IP address and port number (Initial set value = 1 024) of the projector \
and
1 )
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address : Obtain from MAIN MENU → [Network] → [Network status]
Port No. : Acquire from the WEB control...")
Technical Information 102 - ENGLISH Appendix When WEB Control administrator rights password is not set (Non-protect J mode) Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector \ and 1 ) make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address : Obtain from MAIN MENU → [Network] → [Network status] Port No. : Acquire from the WEB control...
Page 103
![Page 103
Technical Information
ENGLISH - 103
Appendix
Serial terminal
The serial connector which is on the connector panel of the projector co\
nforms to the RS-232C interface
specification, so that the projector can be controlled by a personal computer which is connected to this connector.
Connection
J
Pin assignments and signal names
J
D-Sub 9-pin (female)
Outside view Pin No.
Signal name Contents
—NC
TXD Transmitted data
RXD Received data
—NC
GND Earth
—NC
RTS
Connected internally
CTS
—NC
Communication...](http://img.usermanuals.tech/thumb/58/76008/w300_pt-vw435_en_om_d-102.png "Page 103
Technical Information
ENGLISH - 103
Appendix
Serial terminal
The serial connector which is on the connector panel of the projector co\
nforms to the RS-232C interface
specification, so that the projector can be controlled by a personal computer which is connected to this connector.
Connection
J
Pin assignments and signal names
J
D-Sub 9-pin (female)
Outside view Pin No.
Signal name Contents
—NC
TXD Transmitted data
RXD Received data
—NC
GND Earth
—NC
RTS
Connected internally
CTS
—NC
Communication...")
Technical Information ENGLISH - 103 Appendix Serial terminal The serial connector which is on the connector panel of the projector co\ nforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector. Connection J Pin assignments and signal names J D-Sub 9-pin (female) Outside view Pin No. Signal name Contents —NC TXD Transmitted data RXD Received data —NC GND Earth —NC RTS Connected internally CTS —NC Communication...
Page 104
![Page 104
Technical Information
104 - ENGLISH
Appendix
JBasic format
Transmission from the computer begins with STX, then the command, paramet\
er, and ETX are sent in this
order. Add parameters according to the details of control.
STX
C1C2C3 : P1 P2Pn ETX
When sending commands without parameters, a colon (:) is not necessary .
:
JBasic format (with sub command)
STX
C1C2C3 : ETX
S1S2S3S4S5 EP1P2P3P4P5P6
When transmitting a command which does not need a parameter, the operation (E) and parameter are not
:...](http://img.usermanuals.tech/thumb/58/76008/w300_pt-vw435_en_om_d-103.png "Page 104
Technical Information
104 - ENGLISH
Appendix
JBasic format
Transmission from the computer begins with STX, then the command, paramet\
er, and ETX are sent in this
order. Add parameters according to the details of control.
STX
C1C2C3 : P1 P2Pn ETX
When sending commands without parameters, a colon (:) is not necessary .
:
JBasic format (with sub command)
STX
C1C2C3 : ETX
S1S2S3S4S5 EP1P2P3P4P5P6
When transmitting a command which does not need a parameter, the operation (E) and parameter are not
:...")
Technical Information 104 - ENGLISH Appendix JBasic format Transmission from the computer begins with STX, then the command, paramet\ er, and ETX are sent in this order. Add parameters according to the details of control. STX C1C2C3 : P1 P2Pn ETX When sending commands without parameters, a colon (:) is not necessary . : JBasic format (with sub command) STX C1C2C3 : ETX S1S2S3S4S5 EP1P2P3P4P5P6 When transmitting a command which does not need a parameter, the operation (E) and parameter are not :...
Page 105
![Page 105
Technical Information
ENGLISH - 105
Appendix
JCable specifications
[When connected to a computer]
Projector
1
NC NC1
Computer (DTE
specifications)
2 2
3 3
4 NC NC4
5 5
6 NC NC6
7 7
8 8
9 NC NC9
JControl commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command
Control contents Remarks
PON Power [ON]
POF Power [OFF]
IIS INPUT selection (Parameter)
VID = Video
SVD = S-video
RG1 = Computer 1(RGB)
RG2 = Computer 2(RGB)
HD1 = HDMI...](http://img.usermanuals.tech/thumb/58/76008/w300_pt-vw435_en_om_d-104.png "Page 105
Technical Information
ENGLISH - 105
Appendix
JCable specifications
[When connected to a computer]
Projector
1
NC NC1
Computer (DTE
specifications)
2 2
3 3
4 NC NC4
5 5
6 NC NC6
7 7
8 8
9 NC NC9
JControl commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command
Control contents Remarks
PON Power [ON]
POF Power [OFF]
IIS INPUT selection (Parameter)
VID = Video
SVD = S-video
RG1 = Computer 1(RGB)
RG2 = Computer 2(RGB)
HD1 = HDMI...")
Technical Information ENGLISH - 105 Appendix JCable specifications [When connected to a computer] Projector 1 NC NC1 Computer (DTE specifications) 2 2 3 3 4 NC NC4 5 5 6 NC NC6 7 7 8 8 9 NC NC9 JControl commands When controlling the projector from a computer, the following commands are available: [Projector control command] Command Control contents Remarks PON Power [ON] POF Power [OFF] IIS INPUT selection (Parameter) VID = Video SVD = S-video RG1 = Computer 1(RGB) RG2 = Computer 2(RGB) HD1 = HDMI...
Page 106
Technical Information 106 - ENGLISH Appendix Other terminals Pin assignments and signal names of terminal J Outside view Pin No. Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of terminal Outside view Pin No. Signal names : Not assigned - , , : GND terminals R/PR G/G SYNC/Y B/PB + 5 V DDC data HD/SYNC VD DDC clock Pin assignments and signal names of J terminal Outside view Pin No. Signal names , , , , : Not assigned - , :...
Page 107
Technical Information ENGLISH - 107 Appendix USB CONNECTOR (Type A) J Outside view Pin No. Signal names +5V - Data + Data GND USB CONNECTOR (Type B) J Outside view Pin No. Signal names +5V - Data + Data GND
Page 108
Technical Information 108 - ENGLISH Appendix List of compatible signals The following table specifies the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, C = COMPUTER, Y = YP BPR, H = HDMI Mode Display resolution *1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP *3Format H (kHz) V (Hz)P T- VW435NE P T- VX505NE NTSC/NTSC 4.43/ PAL-M/PAL 60 720 x 480 15.759.9 --AA V/S PAL/PAL-N/SECAM 720 x 57615.660.0 --AA V/S 480p 640 x 48031.4759.88...
Page 109
Technical Information ENGLISH - 109 Appendix ModeDisplay resolution *1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP *3Format H (kHz) V (Hz)P T- VW435NE P T- VX505NE SXGA+ 1 400 x 1 05063.970 60.190 107.990 AA C 65.350 60.120 122.850 AA 65.120 59.900 122.430 AA XGA 1 024 x 768 48.36 60.00 65.00 AAA ○ 68.677 84.977 94.504 AAA 60.023 75.03 78.75 AAA ○ 56.476 70.07 75.00 AAA ○ 60.31 74.92 79.252 AAA 48.50 60.02 65.179 AAA 44.00 54.58 59.129 AAA 63.48 79.35 83.41 AAA 62.04...
Page 110
Technical Information 110 - ENGLISH Appendix ModeDisplay resolution *1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP *3Format H (kHz) V (Hz)P T- VW435NE P T- VX505NE WXGA 1 280 x 768 47.776 59.870 79.500 AAA C 60.289 74.893 102.250 AAA 68.633 84.837 117.500 AAA 55.993 69.991 94.964 AAA 57.675 72.004 97.817 AAA 1 280 x 800 49.600 60.050 79.360 AAA 41.200 50.000 68.557 AAA 49.702 59.810 83.500 AAA ○ 63.980 60.020 108.000 AAA 58.289 69.975 98.858 AAA 60.044 71.995 102.795...