Panasonic LCD Projector Pt Vw435NE Operating Instructions

Network
ENGLISH - 71
Settings
AMX D.D.
This function allows the projector to be detected by 
AMX Device Discovery. For more details, visit ht tp://
www.amx.com/.
Press ▲▼ to select 
1  )  [AMX D.D.].
Press 
2  )   button  or the ► 
button to select [On] or [Off] to allow 
the projector to be detected by AMX 
Device Discovery.
RoomView
This function allows the projector to monitor and 
control the projector through network with Crestron 
RoomView
®.
Press ▲▼ to select 
1  )  [RoomView].
Press 
2  )...

Network
72 - ENGLISH
Settings
Network connections
The projector has a network fuction, and the following operations are av\
ailable from the computer using the web 
browser control.Setting and adjustment of the projector.
 
z
Display of the projector status. 
z
Transmission of an E-mail message when there is a problem with the projec\
tor. 
z
Note
A LAN cable is required to use the wired LAN function.
 
z
MONIT OR OUT
COMPUTER 2 IN
COMPUTER 1 IN
SERIAL  INVIDEO IN
AUDIO IN USB B
USB 
A LAN
VIEWER
MOUSE...

Network
ENGLISH - 73
Settings
Connecting with Wired LAN
Projector settings 
J
Use the LAN cable (Straight) to connect the projector with computer.
1  ) 
Turn on the projector and press the  button on the remote control.
2  ) 
Press the menu button to open the [Network] menu, and then select [Wired LAN], 
3  ) 
and press  button.
Set the detailed setup of [Wired LAN].
4  ) 
For details, see “Wired LAN” (Æpage 65).
Note
Please confirm with your network administrator before you connect to an existing...

Network
74 - ENGLISH
Settings
NoteWireless LAN and wired LAN cannot be used in the same segment.
 
z
When multiple devices are connected, a unique IP address must be allocated to each device.
 
z
SSID has to be entered in alphanumeric letters.
 
z
You cannot set “any” or “ANY” for SSID.
 
z
The following settings are set before the projector leaves the factory.
 
z
Computer operation 
J
Make the network setting according to your system administrator.
1  ) 
   If you select [M-DIRECT] for [Wireless LAN]...

Network
ENGLISH - 75
Settings
Accessing from the Web browser
Activate the Web browser in the personal computer.
1  ) 
Enter the IP address set by the projector into the URL input field of the Web browser.
2  ) 
Enter your
3  )   “User name” and “Password”.
 
 
zThe factory default settings are user1 (user privileges)  
or admin1 (administrator privileges) for the use name  
and panasonic (lowercase letters) for the password.
Click [OK] to display the Projector  
4  ) 
status page.
 
 
z“Projector status”...

Network
76 - ENGLISH
Settings
Description of each item  
J
1
  Page selection tabs
  Click these to switch pages.
2   Monitor information button 
Click this item, and the status of the projector 
is displayed.
3   Projector control button 
Click this item to display the projector control 
page.
4   Detailed set up button 
Click this item to display the advanced 
settings page. 5
  Change password button
    Click this button to display the password  change page.
6  CRESTRON RoomView button
    Click this...

Network
ENGLISH - 77
Settings
Error information page  
J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, 
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
• 
When [FAILED] has appeared for an item
Parameter Description
FA NTrouble has occurred in the fan or its...

Network
78 - ENGLISH
Settings
Basic control page  
J
To move from another page, click [Projector control], then [Basic control].
1
  Power standby/on control
2   Use these to select the input signals
3   Volume adjust 4
  Switches image mode
5   Operation of AV mute
5
4
3 2 1
Detail control page 
J
Click [Projector control], then [Advanced control] to display the Detail control page.
1
  Execute Auto setup function
2   Operations on Screen mode
3  Operations on Keystone function
4  Operations on...

Network
ENGLISH - 79
Settings
Network config page 
J
You can change network settings on projector when connecting with the administrator authority.
LAN settings 
z 
Click [Detailed set up] in the menu.
1  ) 
Click [Change] to change the LAN settings.
2  ) 
 
 
zTo return to the previous window, click [Back].
Complete the detailed settings and  
3  ) 
click [Next].
 
When [Next] is clicked, the next page appears, enabling   
 
z
you to complete the detailed settings as desired.   
Settings performed here...

Network
80 - ENGLISH
Settings
Ping test page  
J
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS 
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1   Enter the IP address of the server to be tested.
2   Button for conducting the test. 2
1