Home > Panasonic > Projector > Panasonic LCD Projector Pt Vw435NE Operating Instructions

Panasonic LCD Projector Pt Vw435NE Operating Instructions

Here you can view all the pages of manual Panasonic LCD Projector Pt Vw435NE Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 31

Powering ON/OFF
ENGLISH - 31
Basic Operation
ON(G)/STANDBY(R) indicator
The power indicator informs you the status of the power. Confirm the status of the  
indicator before operating the projector.
ON(G)/STANDBY(R) indicator
Indicator status Status
No illumination or flashing The power cord is unplugged.
RED LitThe power cord is plugged.
The projector is in stand-by mode, after the cooling is completed.
ORANGE FlashingThe projector is cooling down. The projector cannot be turned on until cooling is...

Page 32

Powering ON/OFF
32 - ENGLISH
Basic Operation
Complete peripheral connections (with a 
1  ) 
computer, VCR, etc.) before turning on the 
projector.
Connect the projector’s AC power cord into an 
2  ) 
AC outlet. The  indicator 
lights red. Open the lens cap.
Press the <
3  ) 
> button on the control panel or 
the  button on the remote control. 
The  indicator lights 
green and the cooling fans start to operate. The 
preparation display appears on the screen and 
the count down starts.
After the countdown,...

Page 33

Powering ON/OFF
ENGLISH - 33
Basic Operation
Enter a PIN code
PIN Code Input Dialog BoxWhen using the top control 
J
Press ▲▼ to enter a number. Press ► to fix the 
number and move the red frame pointer to the next 
box. The number changes to  
. If you fixed an 
incorrect number, use the ◄ button to move the 
pointer to the number you want to correct, and then 
enter the correct number.
Repeat this step to complete entering a four-digit 
number.
After entering the four-digit number, move the pointer...

Page 34

Powering ON/OFF
34 - ENGLISH
Basic Operation
Press the <
1  ) > button on the control panel or 
the  button on the remote control, 
and  Power off?  appears on the screen.
Press the <
2  ) 
> button on the control panel or 
the  button on the remote control 
again to turn off the projector. The  indicator starts to blink orange, 
and the cooling fans keep running. At this time, 
you can unplug the AC power cord even if the 
fans are still running.
When the projector has cooled down enough, the 
3  )...

Page 35

ENGLISH - 35
Basic Operation
Projecting
Check the connections of the peripheral devices and 
connection of the power cord (
Æpage 30) and switch 
on the power (
Æpage 32) to start the projector. Select 
the image and adjust the state of the image.
Selecting the image
Select an input signal.
The image selected with the , 
, , ,  or 
 button is projected (
Æpage 38).
Attention
Images may not be projected properly depending on the 
 
z
connected device and DVD, video tape, etc. to be played. 
Select a...

Page 36

36 - ENGLISH
Basic Operation
Basic operations by using the remote control
Using the AUTO SETUP 
function
This function allows you to automatically adjust 
Input search, Auto Keystone correction and Auto PC 
adjustment during signal input from a computer.
 Button
Press the  button on the 
remote control.
Note
For details, see “Setting” of Main menu. (
 
zÆpage 56)
Using the IMAGE button
This function allows you to select a desired image 
mode of the screen.
 Button
Press  button on the remote control to...

Page 37

Basic operations by using the remote control
ENGLISH - 37
Basic Operation
Using the wireless mouse 
function 
 buttons act as left/right mouse 
button while the projector and a computer are 
connected with a USB cable, and move the pointer on 
the screen with  button
.
 Buttons
Press  or  buttons on the remote control.
Note
When using wireless mouse function, please select 
 
z
[Mouse control] in the [USB terminal] first. (
Æpage 58)
When a USB cable is connected to the computer and the 
 
z
projector,...

Page 38

Basic operations by using the remote control
38 - ENGLISH
Basic Operation
Switching the input signal
You can switch the input signals to project.
 Buttons
Press (,, , , , or 
) button on the remote 
control.
COMPUTER 1Switch to Computer 1(RGB)/
Computer 1(Component)/
Computer 1(Scart) input.
COMPUTER 2 Switches to Computer 2(RGB)
input. 
HDMI  Switches to HDMI input.
VIDEO Switches to Video input. 
S-VIDEO Switches to S-video input.
NETWORK  Switches to Network input.
Note
Each press of the  button on...

Page 39

Basic operations by using the remote control
ENGLISH - 39
Basic Operation
Using the AV MUTE function
 Button
Press the < AV MUTE> button on the remote control 
to black out the image. To restore to normal, press the 
< AV MUTE> button again or press any button.
When the Logo is not set, the screen changes each time 
 
z
you press the 
< AV MUTE> button as follows.
The projected Logo (the logo can be set according 
 
z
to users’ favorite) is transferred from computer to 
the projector by “Logo Transfer...

Page 40

40 - ENGLISH
Settings
Menu Navigation
Navigating through the menu
Operating procedure 
J
Press the  button.
1  ) 
The Main Menu screen appears.
Press ▲▼ to select the Main Menu 
2  ) 
item.
Select the desired item from the 9 items: [Input], 
[PC adjust], [Image select], [Image adjust], 
[Screen], [Sound], [Setting], [Information] and 
[Network]. The selected item is highlighted with an 
orange cursor and the submenu of the selected 
item appears on the right.
Press ► or the  button.
3  ) 
The submenu...
Start reading Panasonic LCD Projector Pt Vw435NE Operating Instructions

Related Manuals for Panasonic LCD Projector Pt Vw435NE Operating Instructions

All Panasonic manuals