Panasonic LCD Projector Pt Vw350 Operating Instructions

[STATUS]
Displays the current network status.
1) Press as to select [STATUS].
2) Press the  button.
 fThe [STATUS] screen is displayed.
[DHCP]Displays the usage state of the DHCP server.
[IP ADDRESS]Displays the IP address.
[SUBNET MASK]Displays the subnet mask.
[DEFAULT GATEWAY]Displays the default gateway.
[DNS1]Displays the address of the primary DNS server.
[DNS2]Displays the address of the secondary DNS server.
[MAC ADDRESS]Displays the MAC address.
[INITIALIZE]
This function is used to return...

Connecting with Wired LAN
Example of a normal network connection
Attention
 fWhen a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
 fA LAN cable is required to use the network function.
 fUse shielded LAN cable (STP cable) that is compatible with category 5 or above.
 fUse a LAN cable with length of 100 m or shorter.
Projector settings
1) Use the LAN cable to connect the projector with computer.
2) Turn on the projector.
3) Press the  button to display...

Accessing from the web browser
1) Start up the web browser on the computer.
2)  Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
 fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is 
panasonic (lower case).
4) Click [OK].
 fThe [Projector status] page is displayed.
Note
 fIf you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in...

Available functions per account
With the administrator rights, all functions can be used. With the user rights, available functions are restricted. Select an 
account according to the purpose of use.
ItemFunctionAdministrator rights*1User rights*1Page
[Status]
[Projector status]ll85
Error information pagell86
[Network status]ll86
[Projector control][Basic control]ll87
[Advanced control]ll87
[Detailed set up]
[Network config]l―88
[Ping test]l―89
[E-mail set up]l―89
[Authentication set up]l―90
[ECO...

[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1 [PROJECTOR TYPE]Displays the type of projector.
2 [PROJECTOR NAME]Displays the name set in the projector.
3 [MAIN VERSION]Displays the firmware version of the projector.
4 [POWER]Displays the status of the power.
5 [PICTURE MODE]Displays the status of the picture mode.
6 [SERIAL NUMBER]Displays the serial number of the projector.
7 [NETWORK VERSION]Displays the version of firmware...

Error information page 
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error/warning details.
 fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error.
1 Self-diagnosis result displayDisplays the item check results.[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.[WARNING]: Indicates that there is a warning....

[Basic control] page 
Click [Projector control] → [Basic control].
1 [INPUT]Switches the input signal.
2 [VOLUME]Adjusts the volume level.
3 [PICTURE MODE]
Switches the picture mode.
4 [AV MUTE]Switches between AV mute on/off.
5 [POWER]Turns on/off the power.
6 [CLOSED CAPTION]
Switches the closed caption mode.
[Advanced control] page
Click [Projector control] → [Advanced control].
1 [POSITION]Adjusts the position of image and the keystone correction.
2 [PICTURE]Adjusts the items of image.
ENGLISH - 87...

[Network config] page
Click [Detailed set up] → [Network config].
1) Click [Network config].
 fThe [CAUTION!] screen is displayed.
2)  Select the item which you want to change the setting, then click [Next].
 fThe current setting is displayed.
3) Click [Change] button.
 fThe setting change screen is displayed. 
1 [DHCP ON]/[DHCP OFF]To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]Enter the subnet mask when not using a...

[Ping test] page
Check whether the network is connected to the mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1 [Input IP address]Enter the IP address of the server to be tested.
2 [Submit]Executes the connection test.
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
[E-mail set up] page 
When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up 
to...

7 [E-MAIL ADDRESS 1]/[E-MAIL ADDRESS 2]Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 2] blank when two E-mail addresses are not to be used.
8 Settings of the conditions to send E-mailSelect the conditions to send E-mail. [MAIL CONTENTS]:Select either [NORMAL] or [SIMPLE].[ERROR]:Send an E-mail when an error occurred in the self-diagnosis.
[LAMP RUNTIME]:An E-mail message is sent when the remaining lamp on time for the lamp has reached the value set at the right field.[INTAKE AIR...