Panasonic LCD Projector Pt Vw350 Operating Instructions
Have a look at the manual Panasonic LCD Projector Pt Vw350 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.Refer to "Navigating through the menu" (x page 47) for the operation of the menu screen.
f
When the projector is used for the first time Initial password: Press awsqawsq in order, and press the
button.
fAfter selecting the item, press asqw to set.
Attention
fWhen you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-75.png "Page 76
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.Refer to \"Navigating through the menu\" (x page 47) for the operation of the menu screen.
f
When the projector is used for the first time Initial password: Press awsqawsq in order, and press the
button.
fAfter selecting the item, press asqw to set.
Attention
fWhen you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...")
![Page 77
Note
fThe entered password is displayed with "" mark on the screen.
fAn error message is displayed on the screen when the entered password is\
incorrect. Re-enter the correct password. fIf numbers have been used for the security password, the security password will need to be initialized again if the remote
control is lost. Consult your dealer for the initialization method.
[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1) Press as to select [TEXT DISPLAY].
2)...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-76.png "Page 77
Note
fThe entered password is displayed with \"\" mark on the screen.
fAn error message is displayed on the screen when the entered password is\
incorrect. Re-enter the correct password. fIf numbers have been used for the security password, the security password will need to be initialized again if the remote
control is lost. Consult your dealer for the initialization method.
[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1) Press as to select [TEXT DISPLAY].
2)...")
![Page 78
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the button.
fThe [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER]You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE]...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-77.png "Page 78
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the button.
fThe [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER]You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE]...")
![Page 79
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.Refer to "Navigating through the menu" (x page 47) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
[WIRED LAN]
You can make detailed wired LAN settings.
1) Press as to select [WIRED LAN].
2) Press the button.
fThe [WIRED DETAILED SETUP] screen is displayed.
3) Press as to select an item, and change the setting according to the instructions\
.
[DHCP]...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-78.png "Page 79
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.Refer to \"Navigating through the menu\" (x page 47) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
[WIRED LAN]
You can make detailed wired LAN settings.
1) Press as to select [WIRED LAN].
2) Press the button.
fThe [WIRED DETAILED SETUP] screen is displayed.
3) Press as to select an item, and change the setting according to the instructions\
.
[DHCP]...")
![Page 80
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the button.
fThe [NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector name.
fSelect [ALL DELETE] to delete all the entered characters, or press the button on the remote control to
delete a character on the cursor in the entry field.
4) Select [OK] with the as buttons and press the button.
fTo...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-79.png "Page 80
[NAME CHANGE]
You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the button.
fThe [NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector name.
fSelect [ALL DELETE] to delete all the entered characters, or press the button on the remote control to
delete a character on the cursor in the entry field.
4) Select [OK] with the as buttons and press the button.
fTo...")
![Page 81
[STATUS]
Displays the current network status.
1) Press as to select [STATUS].
2) Press the button.
fThe [STATUS] screen is displayed.
[DHCP]Displays the usage state of the DHCP server.
[IP ADDRESS]Displays the IP address.
[SUBNET MASK]Displays the subnet mask.
[DEFAULT GATEWAY]Displays the default gateway.
[DNS1]Displays the address of the primary DNS server.
[DNS2]Displays the address of the secondary DNS server.
[MAC ADDRESS]Displays the MAC address.
[INITIALIZE]
This function is used to return...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-80.png "Page 81
[STATUS]
Displays the current network status.
1) Press as to select [STATUS].
2) Press the button.
fThe [STATUS] screen is displayed.
[DHCP]Displays the usage state of the DHCP server.
[IP ADDRESS]Displays the IP address.
[SUBNET MASK]Displays the subnet mask.
[DEFAULT GATEWAY]Displays the default gateway.
[DNS1]Displays the address of the primary DNS server.
[DNS2]Displays the address of the secondary DNS server.
[MAC ADDRESS]Displays the MAC address.
[INITIALIZE]
This function is used to return...")
![Page 83
Accessing from the web browser
1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is
panasonic (lower case).
4) Click [OK].
fThe [Projector status] page is displayed.
Note
fIf you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-82.png "Page 83
Accessing from the web browser
1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is
panasonic (lower case).
4) Click [OK].
fThe [Projector status] page is displayed.
Note
fIf you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in...")
![Page 84
Available functions per account
With the administrator rights, all functions can be used. With the user rights, available functions are restricted. Select an
account according to the purpose of use.
ItemFunctionAdministrator rights*1User rights*1Page
[Status]
[Projector status]ll85
Error information pagell86
[Network status]ll86
[Projector control][Basic control]ll87
[Advanced control]ll87
[Detailed set up]
[Network config]l―88
[Ping test]l―89
[E-mail set up]l―89
[Authentication set up]l―90
[ECO...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-83.png "Page 84
Available functions per account
With the administrator rights, all functions can be used. With the user rights, available functions are restricted. Select an
account according to the purpose of use.
ItemFunctionAdministrator rights*1User rights*1Page
[Status]
[Projector status]ll85
Error information pagell86
[Network status]ll86
[Projector control][Basic control]ll87
[Advanced control]ll87
[Detailed set up]
[Network config]l―88
[Ping test]l―89
[E-mail set up]l―89
[Authentication set up]l―90
[ECO...")
![Page 85
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1 [PROJECTOR TYPE]Displays the type of projector.
2 [PROJECTOR NAME]Displays the name set in the projector.
3 [MAIN VERSION]Displays the firmware version of the projector.
4 [POWER]Displays the status of the power.
5 [PICTURE MODE]Displays the status of the picture mode.
6 [SERIAL NUMBER]Displays the serial number of the projector.
7 [NETWORK VERSION]Displays the version of firmware...](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-84.png "Page 85
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1 [PROJECTOR TYPE]Displays the type of projector.
2 [PROJECTOR NAME]Displays the name set in the projector.
3 [MAIN VERSION]Displays the firmware version of the projector.
4 [POWER]Displays the status of the power.
5 [PICTURE MODE]Displays the status of the picture mode.
6 [SERIAL NUMBER]Displays the serial number of the projector.
7 [NETWORK VERSION]Displays the version of firmware...")
![Page 86
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error/warning details.
fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error.
1 Self-diagnosis result displayDisplays the item check results.[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.[WARNING]: Indicates that there is a warning....](http://img.usermanuals.tech/thumb/58/76003/w64_pt-vw350_en_om_d-85.png "Page 86
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error/warning details.
fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error.
1 Self-diagnosis result displayDisplays the item check results.[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.[WARNING]: Indicates that there is a warning....")
[STATUS] Displays the current network status. 1) Press as to select [STATUS]. 2) Press the button. fThe [STATUS] screen is displayed. [DHCP]Displays the usage state of the DHCP server. [IP ADDRESS]Displays the IP address. [SUBNET MASK]Displays the subnet mask. [DEFAULT GATEWAY]Displays the default gateway. [DNS1]Displays the address of the primary DNS server. [DNS2]Displays the address of the secondary DNS server. [MAC ADDRESS]Displays the MAC address. [INITIALIZE] This function is used to return various setting values of [NETWORK] to the factory default value. 1) Press as to select [INITIALIZE]. 2) Press the button. fThe [INITIALIZE] screen is displayed. 3) Press qw to select [OK] and then press the button. Network connections The projector has a network function, and the following operations are a\ vailable from the computer using the web browser control. fSetting and adjustment of the projector. fDisplay of the projector status. fTransmission of an E-mail message when there is a problem with the projec\ tor. The projector supports "Crestron Connected™", and the following application software of Crestron Electronics, Inc. can be used. fRoomView Express fFusion RV fRoomView Server Edition Note f"Crestron Connected™" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple system devices connected via the network, from a computer. This projector supports "Crestron Connected™". fFor details of "Crestron Connected™", refer to the Crestron Electronics, Inc. website. (Provided only in English.) http://www.crestron.com/ For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website. (Provided only in English.) http://www.crestron.com/getroomview Computer that can be used In order to use the Web control function, a Web browser is required. Confirm that the Web browser can be used beforehand. OSCompatible web browser WindowsInternet Explorer 8.0 / 9.0 / 10.0 / 11.0 Mac OSSafari 6.0 / 7.0 / 8.0 Note fCommunication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand. ENGLISH - 81 Chapter 4 Settings - [NETWORK] menu
Connecting with Wired LAN Example of a normal network connection Attention fWhen a LAN cable is directly connected to the projector, the network connection must be made indoors. Note fA LAN cable is required to use the network function. fUse shielded LAN cable (STP cable) that is compatible with category 5 or above. fUse a LAN cable with length of 100 m or shorter. Projector settings 1) Use the LAN cable to connect the projector with computer. 2) Turn on the projector. 3) Press the button to display the [NETWORK] menu, and then select [WIRED LAN], and press the button. 4) Set the detailed setup of [WIRED LAN]. fFor details, refer to “WIRED LAN”. (x page 79) Note fPlease confirm with your network administrator before you connect to an existing network. fThe following settings are set before the projector leaves the factory. [DHCP]OFF [IP ADDRESS]192.168.10.100 [SUBNET MASK]255.255.255.0 [DEFAULT GATEWAY]192.168.10.1 [DNS1] / [DNS2]NONE Computer setting 1) Turn on the computer. 2) Make the network setting according to your system administrator. fIf the projector settings are the default settings, the computer can be \ used with the following network settings. [IP ADDRESS]192.168.10.101 [SUBNET MASK]255.255.255.0 [DEFAULT GATEWAY]192.168.10.1 Computer Projector LAN cable (straight) LAN cable (straight) Hub 82 - ENGLISH Chapter 4 Settings - [NETWORK] menu
Accessing from the web browser 1) Start up the web browser on the computer. 2) Enter the IP address set on the projector into the URL entry field of the web browser. 3) Enter the user name and the password. fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case). 4) Click [OK]. fThe [Projector status] page is displayed. Note fIf you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in [NETWORK] (x page 80). fDo not perform setting or control simultaneously by starting up multiple\ web browsers. Do not set or control the projector from multiple computers. fChange the password first. (x page 93) fAccess will be locked for few minutes when an incorrect password is ente\ red three times consecutively. fSome items on the projector setting page use the Javascript function of the web browser . The projector may not be able to be controlled properly if it is set with a browser that does not have th\ is function enabled. fIf the screen for the web control is not displayed, consult your network\ administrator. fWhile updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction. ENGLISH - 83 Chapter 4 Settings - [NETWORK] menu
Available functions per account With the administrator rights, all functions can be used. With the user rights, available functions are restricted. Select an account according to the purpose of use. ItemFunctionAdministrator rights*1User rights*1Page [Status] [Projector status]ll85 Error information pagell86 [Network status]ll86 [Projector control][Basic control]ll87 [Advanced control]ll87 [Detailed set up] [Network config]l―88 [Ping test]l―89 [E-mail set up]l―89 [Authentication set up]l―90 [ECO management set up] l―93 [Change password] User name for [Administrator]l―94 User name for [User]l―94 Password for [Administrator]l―94 Password for [User]ll94 [Crestron Connected(TM)] Operationl―95 [Tools]l―95 [Info]l―96 [Help]l―96 *1 The functions with l marks in the columns of administrator rights/user rights indicate that the operation can be performed by each right. Description of each item 1 Page tabSwitches pages by clicking this item. 2 [Status]The status of the projector is displayed by clicking this item. 3 [Projector control]The [Projector control] page is displayed by clicking this item. 4 [Detailed set up]The [Detailed set up] page is displayed by clicking this item. 5 [Change password]The [Change password] page is displayed by clicking this item. 6 [Crestron Connected(TM)]The control page of Crestron Connected™ is displayed by clicking this item. 84 - ENGLISH Chapter 4 Settings - [NETWORK] menu
[Projector status] page Click [Status] → [Projector status]. Display the status of the projector for the following items. 1 [PROJECTOR TYPE]Displays the type of projector. 2 [PROJECTOR NAME]Displays the name set in the projector. 3 [MAIN VERSION]Displays the firmware version of the projector. 4 [POWER]Displays the status of the power. 5 [PICTURE MODE]Displays the status of the picture mode. 6 [SERIAL NUMBER]Displays the serial number of the projector. 7 [NETWORK VERSION]Displays the version of firmware of the network. 8 [AV MUTE]Displays the AV mute status. 9 [VOLUME]Displays the volume status. 10 [INPUT]Displays the status of the selected input. 11 [INTAKE AIR TEMPERATURE]Displays the status of the air intake temperature of the projector. 12 [EXHAUST AIR TEMPERATURE]Displays the status of the exhaust air temperature of the projector. 13 [OPTIC MODULE TEMPERATURE]Displays the optics module temperature status of the projector. 14 [LAMP RUNTIME]Displays the runtime of the lamp (converted value). 15 [SELF TEST]Displays the self diagnostics information. 16 [PROJECTOR RUNTIME]Displays the runtime of the projector. ENGLISH - 85 Chapter 4 Settings - [NETWORK] menu
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error/warning details.
fThe projector may go into the standby status to protect the projector de\
pending on the contents of the error.
1 Self-diagnosis result displayDisplays the item check results.[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.[WARNING]: Indicates that there is a warning.
r[FAILED] items displayed when a problem occurs
ParameterDescription
[FAN]Trouble has occurred in the fan or its drive circuit. Consult your dealer.
[FAN(INTAKE)]Trouble has occurred in the intake fan.
[FAN(EXHAUST)]Trouble has occurred in the exhaust fan.
[FAN(LAMP)]Trouble has occurred in the lamp cooling fan.
[INTAKE AIR TEMPERATURE]The air intake temperature is too high. The projector may be used in an operating environment where the temperature is high, such as near a heating applia\
nce.
[EXHAUST AIR TEMPERATURE]The exhaust air temperature is high. The air exhaust port may be blocked.
[OPTICS MODULE TEMPERATURE]The temperature around the optics module inside the projector is high. The projec-tor may be used in an operating environment where the temperature is hig\
h, such as near a heating appliance.
[LAMP REMAIN TIME]The lamp runtime has exceeded the prescribed cumulative time, and it is now time to replace the lamp.
[LAMP STATUS]The lamp has failed to light.Wait a short while for the lamp to cool off, and then turn on the power.
[APERTURE (CONTRAST-SHUTTER)]Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
[AIR FILTER]There is too much dust accumulated in the air filter unit. Turn off the projector and unplug the power plug from the wall outlet, then replace the air filter unit.
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
86 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
[Basic control] page Click [Projector control] → [Basic control]. 1 [INPUT]Switches the input signal. 2 [VOLUME]Adjusts the volume level. 3 [PICTURE MODE] Switches the picture mode. 4 [AV MUTE]Switches between AV mute on/off. 5 [POWER]Turns on/off the power. 6 [CLOSED CAPTION] Switches the closed caption mode. [Advanced control] page Click [Projector control] → [Advanced control]. 1 [POSITION]Adjusts the position of image and the keystone correction. 2 [PICTURE]Adjusts the items of image. ENGLISH - 87 Chapter 4 Settings - [NETWORK] menu
[Network config] page Click [Detailed set up] → [Network config]. 1) Click [Network config]. fThe [CAUTION!] screen is displayed. 2) Select the item which you want to change the setting, then click [Next]. fThe current setting is displayed. 3) Click [Change] button. fThe setting change screen is displayed. 1 [DHCP ON]/[DHCP OFF]To enable the DHCP client function, set to [DHCP ON]. 2 [IP ADDRESS]Enter the IP address when not using a DHCP server. 3 [SUBNET MASK]Enter the subnet mask when not using a DHCP server. 4 [DEFAULT GATEWAY]Enter the default gateway address when not using a DHCP server. 5 [DNS1]/[DNS2]Enter the DNS1/DNS2 server address.Permissible/ available characters for the entry of DNS1/ DNS2 server address.(primary):Numbers (0 - 9), period (.)(Example: 192.168.0.253). 6 [Back]/[Next]Click the [Back] button to return to the original screen. The current settings are displayed by pressing the [Next] button.Click the [Submit] button to update the settings. Note fWhen you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click [Network config] again since the following operation will not be guaranteed. fChanging LAN settings while connected to the LAN may cause the connection to cut out. 88 - ENGLISH Chapter 4 Settings - [NETWORK] menu
[Ping test] page Check whether the network is connected to the mail server, POP server, DNS server, etc. Click [Detailed set up] → [Ping test]. 1 [Input IP address]Enter the IP address of the server to be tested. 2 [Submit]Executes the connection test. 3 Example of display when the connection has succeeded 4 Example of display when the connection has failed [E-mail set up] page When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to two addresses). Click [Detailed set up] → [E-mail set up]. 1 [ENABLE]Select [Enable] to use the E-mail function. 2 [SMTP SERVER NAME]Enter the IP address or the server name of the E-mail server (SMTP). To enter the server name, the DNS server needs to be set up. 3 [MAIL FROM]Enter the E-mail address of the projector. (Up to 63 characters in single byte) 4 [MEMO]Enter information such as the location of the projector that notifies the sender of the E-mail. (Up to 63 characters in single byte) 5 [MINIMUM TIME]Change the minimum interval for the temperature warningE-mail. The default value is 60 minutes. In this case, another E-mail will not be sent for 60 minutes after sending the temperature warning E-mail even if it reaches the warning temperature. 6 [INTAKE AIR TEMPERATURE]Change the temperature setting for the temperature warning mail. A temperature warning E-mail is sent when the temperature exceeds this value. ENGLISH - 89 Chapter 4 Settings - [NETWORK] menu
7 [E-MAIL ADDRESS 1]/[E-MAIL ADDRESS 2]Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 2] blank when two E-mail addresses are not to be used. 8 Settings of the conditions to send E-mailSelect the conditions to send E-mail. [MAIL CONTENTS]:Select either [NORMAL] or [SIMPLE].[ERROR]:Send an E-mail when an error occurred in the self-diagnosis. [LAMP RUNTIME]:An E-mail message is sent when the remaining lamp on time for the lamp has reached the value set at the right field.[INTAKE AIR TEMPERATURE]:Send an E-mail when the air intake temperature has reached the value set at the above field. 9 [Submit]Update the settings. [Authentication set up] page Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail. Click [Detailed set up] → [Authentication set up]. 1 [Auth]Select the authentication method specified by your Internet service provider. 2 [SMTP Auth]Set when the SMTP authentication is selected. 3 [POP server name]Enter the POP server name.Allowed characters:Alphanumerics (A - Z, a - z, 0 - 9)Minus sign (-) and period (.) 4 [User name]Enter the user name for the POP server or the SMTP server. 5 [Password]Enter the password for the POP server or the SMTP server. 6 [SMTP server port]Enter the port number of the SMTP server.(Normally 25) 7 [POP server port]Enter the port number of the POP server.(Normally 110) 8 [Submit]Update the settings. 90 - ENGLISH Chapter 4 Settings - [NETWORK] menu