Panasonic LCD Projector Pt Vw350 Operating Instructions

[LANGUAGE] menu
On the menu screen, select [LANGUAGE] from the main menu, and select an \
item from the sub-menu.Refer to "Navigating through the menu" (x page 47) for the operation of the menu screen.
 fPress as to select a language, and press  button to set.
[LANGUAGE]
You can select the language of the on-screen display.
 fVarious menus, settings, adjustment screens, control button names, etc., \
are displayed in the selected language.
 fThe language can be changed to English, German, French,...

[DISPLAY OPTION] menu 
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-menu.Refer to "Navigating through the menu" (x page 47) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[ON-SCREEN DISPLAY]
Set the on-screen display and position.
[INPUT GUIDE]
Set whether to display the input guide when switching the input source.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the  button.
 fThe [ON-SCREEN DISPLAY]...

3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Hides the warning message.
[ON]Displays the warning message.
[HDMI SIGNAL LEVEL]
Switch the setting when the external equipment is connected to the  terminal of the projector and the image is not 
projected correctly.
1) Press as to select [HDMI SIGNAL LEVEL].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO]Sets the signal...

[CC2]Displays CC2 data.
[CC3]Displays CC3 data.
[CC4]Displays CC4 data.
Note
 fClosed caption is a function that displays text information of video signals mainly used in North America. Captions may not 
be displayed depending on the connected devices or contents being played\
 back.
 f[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YCBCR signal is input.
 fIf [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices 
or the used...

[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the  button on the remote control or on the control panel on each occasion if you input unr\
egistered signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO]Enables the auto setup function when switching signals.
[BUTTON]Enables the...

[P-TIMER]
Set and operate the presentation timer function.
1) Press as to select [P-TIMER].
2) Press the  button.
 fThe [P-TIMER] screen is displayed.
[MODE]Switches the elapsed time between [COUNT UP] and [COUNT DOWN].
[TIMER]Sets the finish time of timer when [COUNT DOWN] is selected.
[START] / [STOP] /[RESTART]Operates the timer.
[RESET]Resets the count.
[EXIT][P-TIMER] is finished.
Setting [MODE]
1) Press as to select [MODE].
2) Press qw to switch the item.
 fThe items will switch each time you press...

3) Press as to select [EXIT].
4) Press the  button.
[P IN P]
(Only for PT-VW350)
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1) Press as to select [P IN P].
2) Press the  button.
 fThe [P IN P] screen is displayed.
[MODE]
1) Press as to select [MODE].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]P IN P function is disabled.
[SIDE BY SIDE]Sub screen is displayed at the side of the main screen.
[P IN P]Sub...

[AV MUTE]Turn off audio and image when the projector is not used for a certain period of\
 time. To release this function, press the  button or the  button on the remote control.
[DIGITAL ZOOM]For details, refer to "Using the DIGITAL ZOOM function" (x page 43).
4) Press the  button.
68 - ENGLISH
Chapter 4   Settings - [DISPLAY OPTION] menu   

[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu.Refer to "Navigating through the menu" (x page 47) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[STATUS]
You can check the using status of the projector.
1) Press as to select [STATUS].
2) Press the  button.
 fThe [STATUS] screen is displayed.
[SIGNAL][NAME]Displays the name of input signal.
[FREQUENCY]Displays the scanning frequency...

1) Press as to select [PROJECTOR ID].
2) Press the  button.
 fThe [PROJECTOR ID] screen is displayed.
3) Press as to select a projector ID.
 fSelect one from [ALL], and [1] to [6].
[ALL]Select when controlling projectors without specifying an ID number.
[1] - [6]Select when specifying an ID number to control individual projector.
4) Press the  button to set it.
 f[PROJECTOR ID] is set.
Note
 fTo specify an ID number for individual control, the ID number of a remote control must match th\
e ID number of...