Panasonic LCD Projector Pt Vw350 Operating Instructions

Basic operations by using the remote control
Using the AUTO SETUP function
The automatic setup function can be used to automatically adjust the res\
olution, clock phase, and image position when 
analog RGB signals consisting of bitmap images such as computer signals \
are being input. Supplying images with bright 
white borders at the edges and high-contrast black and white characters \
is recommended when the system is in automatic 
adjustment mode.
Avoid supplying images that include halftones or...

Switching the input signal
You can switch the input signals to project.
 buttons
1) Press the , , ,  or  button on the remote 
control.
 fThis operation can be also performed using the  button on the control panel.
Switch to COMPUTER1 input.
Switch to COMPUTER2 input. 
 Switch to HDMI input.
Switch to VIDEO input. 
Switch to S-VIDEO input.
Using the FUNCTION button
Some operations in the menu can be assigned to the  button on the remote control so that it can be used as an 
easy shortcut button.
button...

Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the audio and image temporarily.
button
1) Press the  button on the remote control.
 fThe audio and image turn off.
2) Press the  button again.
 fThe audio and image turn on.
Note
 fWhen [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE.
Using the P-TIMER function
You can operate the presentation timer function.
Presentations,...

 rButton functions of moving screen
Operation menuOperationAdjustment
Press the a button.The display position moves down.
Press the s button.The display position moves up.
Press the q button.The display position moves right.
Press the w button.The display position moves left.
 fWhen you have executed the operation of remote control directly, the individual adjustment screen is not displayed 
and the operation menu of the moving screen is displayed. At this time, you can adjust the magnification by using...

Using the P IN P function
(Only for PT-VW350)
Two images can be projected simultaneously in form of projection mode (a small sub screen in the main screen [P IN P] / a 
small sub screen side by side with the main screen [SIDE BY SIDE]).
button
1) Press the  button on the remote control.
 fPress this button to switch the mode ([P IN P]/[SIDE BY SIDE]).
Note
 fFor details, refer to [P IN P] (x page 67). 
Switch the input source
You can switch the input source of the main screen and sub screen while the P...

Chapter 4   Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.
46 - ENGLISH  

Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
1) Press the  button on the remote control or the control panel.
 fThe main menu screen appears.
2) Press as to select an item from the main menu.
 fThe selected item is highlighted in yellow.
3) Press the  button.
 fThe sub-menu is displayed, and sub-menu items become selectable.
4) Press as to select the desired sub-menu item, press qw...

Note
 fPressing the  button or  button while the menu screen is displayed returns to the previous menu.
 fSome items may not be adjusted or used for certain signal formats to be \
input to the projector. The menu items that cannot 
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
 fSome items can be adjusted even if signals are not input.
 fIndividual adjustment screen is cleared...

Sub-menu
The sub-menu screen of the selected main menu appears, and you can set a\
nd adjust the various items in the sub-menu.
[PICTURE] 
Sub-menu itemFactory defaultPage
[PICTURE MODE][STANDARD]51
[CONTRAST][0]51
[BRIGHTNESS][0]52
[COLOR]*1[0]52
[TINT]*1[0]52
[SHARPNESS][8]52
[COLOR TEMPERATURE][DEFAULT]53
[IRIS][OFF]*253
[ADVANCED MENU]-53
[DAYLIGHT VIEW][AUTO]53
[DIGITAL CINEMA REALITY][ON]54
[NOISE REDUCTION]*3[OFF]54
[TV-SYSTEM]*3[AUTO]54
[RGB/YPBPR]/[RGB/YCBCR]*4[AUTO]55
*1 Only for movie-based...

[PROJECTOR SETUP] 
Sub-menu itemFactory defaultPage
[STATUS]-69
[COMPUTER2 SELECT][COMPUTER2 IN]69
[PROJECTOR ID][ALL]69
[INITIAL START UP][LAST MEMORY]70
[PROJECTION METHOD][FRONT/DESK]70
[HIGH ALTITUDE MODE][OFF]70
[LAMP POWER][NORMAL]71
[ECO MANAGEMENT]-71
[EMULATE][DEFAULT]72
[FUNCTION BUTTON]-73
[AUDIO SETTING]-73
[TEST PATTERN]-75
[FILTER COUNTER]-75
[INITIALIZE ALL]-75
[SECURITY] 
Sub-menu itemFactory DefaultPage
[PASSWORD][OFF]76
[PASSWORD CHANGE]-76
[TEXT DISPLAY][OFF]77
[TEXT CHANGE]-77
[MENU...