Panasonic LCD Projector Pt Rz670 Operating Instructions

							Chapter 6 Appendix — Specifications
ENGLISH - 181
 rTerminal
 terminal 1 set (BNC x 5 (RGB/YP
BPR/YCBCR/YC/VIDEO x 1))
RGB signal 0.7
 
V [p-p] 75   Ω (SYNC ON GREEN: 1.0   V [p-p] 75   Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
Y/C signal Y
: 1.0
 
V [p-p], C: 0.286
 
V [p-p] 75
 
Ω
VIDEO signal BNC: 1.0
 
V [p-p], 75
 
Ω
 terminal 1 set, high-density D
-
Sub 15
 
p (female)
RGB signal 0.7
 
V [p-p] 75
 
Ω (SYNC ON GREEN: 1.0
 
V [p-p] 75
 
Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
 terminal 1 set, DVI
-
D 24
 
p, single link, DVI 1.0 compliant, HDCP compatible
 terminal 1 set, HDMI 19
 
p, HDCP compatible, Deep Color compatible
 terminal
(Only for PT
-

RZ670) 1 set (BNC)
SD
-
SDI signal SMPTE ST 259 compliant
HD
-
SDI signal SMPTE ST 292 compliant
3G
-
SDI signal SMPTE ST 424 compliant
/ 
terminal D
-
Sub 9
 
p, 1 set each, RS
-
232C compliant, for computer control
/ terminal M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
 terminal 1 set, D
-
Sub 9
 
p, for contact control
 terminal 1 set, RJ
-
45, for network and DIGITAL LINK connections, PJLink compatible, 100Base - TX, Art-Net 
compatible
Note
 f The model numbers of accessories and optional accessories are subject to\
 change without prior notice.   
						

							Chapter 6 Appendix — Dimensions
182 - ENGLISH
Dimensions
Unit: mm
221 (8-11/16)249 (9-13/16)
498 (19-19/32) 457 (18)
442 (17-13/32)
20.5 (13/16)
115.5 (4-9/16)
200 (7-7/8) 43 (1-11/16)
538 (21-3/16)
* Actual dimensions may dif
fer depending on the product.   
						

							Chapter 6 Appendix — Precautions for attaching the Ceiling Mount Bracket
ENGLISH - 183
Precautions for attaching the Ceiling Mount Bracket
 fWhen installing the projector to the ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.: ET- PKD120H (for high ceilings), 
ET- PKD120S (for low ceilings), ET- PKD130H (for High Ceilings, 6-axis Adjustment), ET- PKD130B (Projector Mount Bracket)) specified by 
Panasonic. The Ceiling Mount Bracket (Model No.: ET
-

PKD120H (for high ceilings), ET
-
 PKD120S (for low ceilings), ET
-
 PKD130H (for High 
Ceilings, 6-axis Adjustment)) is used in combination with the Ceiling Mount Bracket (Model No.: ET
-

PKD130B (Projector Mount Bracket)).
 fWhen installing the projector

, attach the drop-prevention set that comes with the ceiling mount brack\
et to the projector. When the drop-
prevention kit (Service Model No.: TTRA0214) is necessary, consult your dealer.
 f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
 fPanasonic takes no responsibility for any damage to the projector result\
ing from use of a ceiling mount bracket not manufactured by 
Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.
 fUnused products must be removed promptly by a qualified technician.
 fUse a torque screwdriver or 

Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or 
impact screwdrivers.
 f Read the Installation Instructions for the ceiling mount bracket for det\
ails.
 fThe model numbers of accessories and optional accessories are subject to\
 change without prior notice.


M6
Bottom view
Model No. of Ceiling Mount Bracket: ET-PKD120H (for high ceilings)ET-PKD120S (for low ceilings)
12 mm (15/32)
Torque: (M6) 4 ± 0.5 N·m ET-PKD130H (for High Ceilings, 6-axis Adjustment)
ET-PKD130B (Projector Mount Bracket)   
						

							Index
184 - ENGLISH
AAccessories    22
 terminal
     25,   51
Adjusting adjustable feet
     4 3
[ADV
ANCED MENU]
     69,   85
Art-Net
     20,   166
[Art-Net SETUP]
     138
[ASPECT]
     7 9
Automatic setup function
     6 4
[AUT
O SETUP]
     9 3
 button
Projector body
    
 26,   64
Remote control
     24,   64
[AUTO SIGNAL]
     9 3
B[BACK COLOR]    103
[BACKUP
 INPUT SETTING]
     9 4
[BLANKING]
     8 5
[BRIGHTNESS]
     72
[BRIGHTNESS CONTROL]
     11 3
CCautions on use      21
Cautions when installing
     1 8
Cautions when transporting
     1 8
Ceiling Mount Bracket
     183
[CLAMP
 POSITION]
     8 6
[CLOCK PHASE]
     8 1
[CLOSED CAPTION SETTING]
     102
[COLOR]
     73
[COLOR CORRECTION]
     9 2
[COLOR MA
TCHING]
     9 1
[COLOR 
TEMPERATURE]
     73
Connecting the power cord
     5 1
Connecting the remote control to the projector 
with a cable
    
 2 8
Connection
     4 6
[CONTRAST]
     72
[CONTROL
 DEVICE PASSWORD CHANGE]
     134
[CONTROL
 DEVICE SETUP]
     132
[COOLING CONDITION]
     108
[Crestron Connected(TM)]
     154
[CUT
 OFF]
     106
D[DATE AND TIME]      122
 button
Remote control
    
 24,   68
Deleting the registered signal
     128
[DIGIT
AL CINEMA REALITY]
     8 5
[DIGIT
AL INTERFACE BOX]
     138
DIGIT
AL LINK
     20
 button
Projector body
    
 26,   63
Remote control
     24,   63
[DIGITAL LINK IN]
     9 8
[DIGIT
AL LINK MODE]
     135
[DIGIT
AL LINK SETUP]
     135
[DIGIT
AL LINK STATUS]
     136
Dimensions
     182
Display language
     70,   90
[DISPLAY OPTION]
     70,   91
[DISPLAY SETTING]
     132
Disposal
     21
 button Projector body
    
 26,   63
Remote control
     24,   63
[DVI-D IN]
     9 6
[DYNAMIC CONTRAST]
     77
EEarly Warning Software    21
[EDGE BLENDING]
     8 7
 button Projector body
    
 2 6
Remote control
     2 4
Expanding signal lock-in range
     129
F button
Remote control     24,   60
[FRAME RESPONSE]
     8 8
[FREEZE]
     105
Function button
     6 4
 button Remote control
    
 24,   64
[FUNCTION BUTTON]
     122
G[GAMMA]    7 5
[GEOMETR
Y]
     8 1
H button
Projector body     26,   63
Remote control
     24,   63
[HDMI IN]
     9 7
[HIGH 
ALTITUDE MODE]
     108
I button
Remote control     24,   65
[IMAGE ROTATION]
     103
[INITIALIZE]
     124
Initial settings
     5 2
[INPUT
 RESOLUTION]
     8 6
Installation mode
     30
K[KEYSTONE]    8 4
L button
Projector body     26,   60
[LENS CALIBRATION]
     123
[LIGHT
 OUTPUT]
     11 2
Light source indicator
     158
List of compatible signals
     176
[LOAD 
ALL USER DATA]
     124
MMain menu     6 8
Main power switch
     25,   52
Maintenance
     159
 button Projector body
    
 26,   67
Remote control
     24,   67
Menu item
     6 9
NNavigating through the menu     6 7
[NETWORK]
     71,   135
Network connection
     138
[NETWORK CONTROL]
     137
[NETWORK SETUP]
     136
[NETWORK ST
ATUS]
     137
[NOISE REDUCTION]
     7 6
[NO SIGNAL
 SHUT-OFF]
     121
O button
Remote control     24,   62
[ON-SCREEN DISPLAY]
     100
On-screen menu
     6 7
[OPERA
TION SETTING]
     108
Optional accessories
     23
P[PICTURE]    69,   72
[PICTURE MODE]
     72
[P
 IN P]
     71,   125
P IN P function
     125
[POSITION]
     69,   79
Power cord
     5 1
Power indicator
     5 1
Power on button Projector body
    
 2 6
Remote control
     2 4
Power standby button Projector body
    
 2 6
Remote control
     2 4
Precautions for attaching the Ceiling Mount 
Bracket
    
 183
Precautions for use
     1 8
Projecting
     6 0
[PROJECTION METHOD]
     107
Projector body
     2 5
[PROJECT
OR ID]
     107
[PROJECT
OR SETUP]
     70, 107
Protecting the registered signal
     129
R[RASTER POSITION]    8 9
Read this first!
     2
Registering new signals
     128
 terminal
     2 8
 terminal
     2 8  terminal  
  
 173
[REMOTE2 MODE]
    122
Remote control
    2 4
Remote control operations
    6 2
Removing/attaching the projection lens
     4 4
Renaming the registered signal
     128
Resetting to the factory default
     6 8
 button Remote control
 
   24,   63
 button Projector body
 
   26,   63
 button Projector body
 
   26,   63
[RGB IN]
    9 4
[RS-232C]
    119,   169
S[SAVE ALL USER DATA]    123
[SCHEDULE]
    11 7
[SCREEN SETTING]
    9 2
 button Projector body
 
   26,   63
Remote control
    24,   63
[SDI IN]
    9 9
Security
    20
[SECURITY]
    71, 131
[SECURITY
 PASSWORD]
     131
[SECURITY
 PASSWORD CHANGE]
     131
Selecting the input signal
    6 0
 terminal
    169
 terminal
    169
[SER
VICE PASSWORD]
    124
Setting the remote control ID numbers
     6 5
Setting up
    30
[SHARPNESS]
    7 6
[SHIFT]
    7 9
 button Remote control
 
   24,   60
 button Projector body
 
   26,   62
Remote control
    24,   62
[SHUTTER SETTING]
    104
[SIGNAL
 LIST]
    71,   128
Specifications
    178
sRGB-compliant video
    7 8
[ST
ANDBY MODE]
    11 6
[ST
ARTUP INPUT SELECT]
     11 8
[ST
ARTUP LOGO]
    103
[ST
ATUS]
    120
 button
Remote control
 
   24,   63
Sub memory
    130
Switching of
f the projector
    5 9
Switching on the projector
    5 2
Switching the input signal
    6 3
[SYSTEM DA
YLIGHT VIEW]
     7 6
[SYSTEM SELECT
OR]
    77
TTemperature indicator    158
[TEST
 PATTERN]
    71, 127
 button
Remote control
 
   24,   64
[TEXT CHANGE]
    132
[TINT]
    73
T
roubleshooting
    160
T
wo window
    174
U[UNIFORMITY]    103
Upgrade Kit
    175
V button Remote control     24,  63
W[WAVEFORM MONITOR]    105
[WHITE GAIN]
    7 5
Z[ZOOM]    8 0
 button Remote control
 
   24,   60
Index   
						

							Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents \
mean that used 
electrical and electronic products and batteries should not be mixed with general household 
waste. For proper treatment, recovery and recycling of old products and used batteries, please 
take them to applicable collection points, in accordance with your natio\
nal legislation and the 
Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources 
and prevent any potential negative effects on human health and the environment which could 
otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact 
your local municipality, your waste disposal service or the point of sale where you purchased t\
he 
items.
Penalties may be applicable for incorrect disposal of this waste, in acc\
ordance with national 
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please conta\
ct your dealer or supplier 
for further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please 
contact your local authorities or dealer and ask for the correct method \
of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this\
 case it complies with 
the requirement set by the Directive for the chemical involved.
Product Information (for Turkey only)
AEEE Yönetmeliğine Uygundur.
Eski Ekipman ve Bataryaların İşlenmesi.
Sadece geri dönüşüm sistemleri olan Avrupa Birliği ve ülkeleri için geçerlidir.
Ürünler, ambalaj ve/veya ekli belgeler üzerindeki bu semboller kullanılmış elektrik ve elektronik 
ürünlerin ve pillerin genel ev atığı ile karıştırılmaması gerektiğini ifade eder.
Eski ürünlerin ve pillerin toplanması ve geri kazanılması için bu atıkları lütfen yasayla belirlenmiş 
olan uygun toplama merkezlerine teslim ediniz.
Bu atıkların doğru işlenmesiyle, değerli kaynakların korunmasına ve insan sağlığı ve çevreye 
olası negatif etkilerinin engellenmesine yardımcı olabilirsiniz.
Atıkların toplanması ve geri dönüşümü için detaylı bilgi için lütfen bağlı olduğunuz yerel 
yönetimlerle iletişime geçiniz.
Atıkların atılmasıyla ilgili yanlış uygulamalar yasayla belirlenmiş olan cezalara sebebiyet verebilir.
W0814TI2016 -YI
Panasonic System Communications Company of North America
5th Floor, Two Riverfront Plaza, Newark, NJ 07102-5490
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
Panasonic Corporation
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2014