Panasonic LCD Projector Pt Rz570 Operating Instructions

							Chapter 7 Appendix — Specifications
ENGLISH - 171
 rConnecting terminal
 terminal 1 set, high-density D - Sub 15   p (female)
RGB signal 0.7   V [p-p] 75   Ω (SYNC ON GREEN: 1.0   V [p-p] 75   Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
Y/C signal Y
: 1.0
 
V [p-p], C: 0.286
 
V [p-p] 75
 
Ω
 
terminal 1 set, high-density D
-
Sub 15
 
p (female)
RGB signal 0.7
 
V [p-p] 75
 
Ω (SYNC ON GREEN: 1.0
 
V [p-p] 75
 
Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
 terminal 1 set, DVI
-
D 24
 
p, single link, DVI 1.0 compliant, HDCP compatible
 terminal
 terminal Total 2 sets, HDMI 19
 
p, HDCP compatible, Deep Color compatible
Audio signal Linear PCM (sampling frequency: 48
 
kHz/44.1
 
kHz/32   kHz)
 terminal 1 set, pin jack, 1.0
 
V [p-p] 75
 
Ω
 terminal 1 set, pin jack x 2 (L-R), 0.5
 
V [rms], input impedance 22
 
kΩ or more
 terminal
 terminal Total 2 sets, M3 stereo mini jack, 0.5
 
V [rms], input impedance 22
 
kΩ or more
 
terminal 1 set, M3 stereo mini jack (monitor output, stereo compatible), 0
 
V [rms] to 1.80   V [rms] (variable), output 
impedance 2.2
 
kΩ or less
 terminal D
-
Sub 9
 
p, 1 set, RS
-
232C compliant, for computer control
 terminal 1 set, RJ
-
45, for network and DIGITAL LINK connections (HDBaseT
TM compliant), PJLink compatible, 
100Base
-
TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
 terminal 1 set, RJ
-
45, for network connection, PJLink compatible, 10Base
-
T/100Base - TX, Art-Net compatible
 terminal USB connector (type A) x 1, for power supply only (DC 5
 
V, maximum 900   mA)  
						

							Chapter 7 Appendix — Specifications
172 - ENGLISH
 rCompatible signal
For details of the types of video signals that can be used with the projector , refer to “List of compatible signals” 
(x   page   167).
Video input, Y/C input
Horizontal: 15.73
  kHz, Vertical: 59.94   Hz; Horizontal: 15.63   kHz, Vertical: 50   Hz
RGB input
 f Resolution: 640

  x   400 to 1   920   x   1   200
 fDot clock frequency: 162

  MHz or less
 fPIAS (Panasonic Intelligent 

Auto Scanning) system
YC
BCR/YPBPR input
 f Resolution: 480i/576i to 1

  920   x   1   080
 fDot clock frequency: 148.5

  MHz or lower
 fThe HD/SYNC and VD terminals do not support 3 value SYNC.
DVI

-
D input
 f Moving image signal resolution: 480i*1/576i*1 to 1 920 x 1 080
Still image signal resolution: 640
 
x
 
400 to 1
 
920   x   1   200 (non-interlace)
 fDot clock frequency: 25

 
MHz to 162
 
MHz
HDMI input
 f Moving image signal resolution: 480i*1/576i*1 to 1 920 x 1 080
Still image signal resolution: 640
 
x
 
400 to 1
 
920   x   1   200 (non-interlace)
 fDot clock frequency: 25

 
MHz to 162
 
MHz
*1 Pixel-Repetition signal (dot clock frequency 27.0   MHz) only
Note
 fDIGITAL LINK input compatible signal is the same as HDMI input compatible signal.  
						

							Chapter 7 Appendix — Dimensions
ENGLISH - 173
Dimensions
Unit: mm
210 (8-9/32)249 (9-13/16)
498 (19-5/8) 372.5 (14-21/32)
420 (16-17/32)
13 (1/2)
94 (3-11/16)
168 (6-5/8) 32 (1-1/4)
460 (18-1/8)
* Actual dimensions may dif
fer depending on the product.  
						

							Chapter 7 Appendix — Precautions for attaching the Ceiling Mount Bracket
174 - ENGLISH
Precautions for attaching the Ceiling Mount Bracket
 fWhen installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket (Model 
No.: ET
-

PKD120H (for High Ceilings), ET
-
 PKD120S (for Low Ceilings), ET
-
 PKD130B (Projector Mount 
Bracket)). The Ceiling Mount Bracket (Model No.: ET
-

PKD120H (for High Ceilings), ET
-
 PKD120S (for Low 
Ceilings)) is used in combination with the Ceiling Mount Bracket (Model No.: ET
-

PKD130B (Projector Mount 
Bracket)).
 f Attach the drop-prevention set that comes with the Ceiling Mount Bracket to the projector . If you need the drop-
prevention set (Service Model No.: 

TTRA0214) is necessary, consult your dealer.
 fAsk a qualified technician to do the installation work such as mounting the projector on the ceiling.
 fPanasonic takes no responsibility for any damage to the projector resulting from use of the Ceiling Mount 
Bracket not manufactured by Panasonic or the inappropriate choice of location for installing the Ceiling Mount 
Bracket, even if the warranty period of the projector has not expired.
 fUnused products must be removed promptly by a qualified technician.
 fUse a torque screwdriver or 

Allen torque wrench to tighten bolts to their specified tightening torques. Do not use 
electric screwdrivers or impact screwdrivers.
 f Read the Installation Instructions of the Ceiling Mount Bracket for details.
 fThe model numbers of accessories and optional accessories are subject to change without prior notice.


M6
Bottom view
Model No. of Ceiling Mount Bracket: ET-PKD120H (for High Ceilings)ET-PKD120S (for Low Ceilings)
15 mm (19/32)
Torque: (M6) 4 ± 0.5 N·m ET-PKD130B (Projector Mount Bracket)  
						

							Index
ENGLISH - 175
AAccessories    22
 terminal
     27,   40
Adjusting adjustable feet
     33
[ADV
ANCED MENU]
     59,   73
Art-Net
     20,   157
[Art-Net CHANNEL SETTING]
     125
[Art-Net SETUP]
     124
[Art-Net ST
ATUS]
     125
[ASPECT]
     68
 button Remote control
    
 24,   53
Aspect function
     53
[AUDIO SETTING]
     107
Automatic setup function
     52
[AUT
O SETUP]
     81
 button
Remote control
    
 24,   52
[AUTO SIGNAL]
     81
B[BACK COLOR]    90
[BLANKING]
     73
[BRIGHTNESS]
     62
[BRIGHTNESS CONTROL]
     99
CCautions on use      20
Cautions when installing
     17
Cautions when transporting
     17
Ceiling Mount Bracket
     174
[CLAMP
 POSITION]
     74
[CLOCK PHASE]
     70
[CLOSED CAPTION SETTING]
     89
[COLOR]
     63
[COLOR CORRECTION]
     80
[COLOR MA
TCHING]
     79
[COLOR 
TEMPERATURE]
     63
 button Remote control
    
 24,   47
[COMPUTER IN/OUT]
     82
Connecting the power cord
     40
Connection
     34
[CONTRAST]
     62
[CONTROL
 DEVICE PASSWORD CHANGE]
     120
[CONTROL
 DEVICE SETUP]
     11 9
[Crestron Connected(TM)]
     144
[CUT
 OFF]
     94
D[DATE AND TIME]      109
[DA
YLIGHT VIEW]
     65
 button
Remote control
    
 24,   58
Deleting the registered signal
     11 5
[DIGIT
AL CINEMA REALITY]
     73
DIGIT
AL LINK
     20
 button
Remote control
    
 24,   47
[DIGITAL LINK IN]
     86
[DIGIT
AL LINK MENU]
     124
[DIGIT
AL LINK MODE]
     122
[DIGIT
AL LINK STATUS]
     122
Dimensions
     173
Display language
     60,   78
[DISPLAY OPTION]
     60,   79
[DISPLAY SETTING]
     11 8
Disposal
     20
 button Remote control
    
 24,   47
[DVI-D IN]
     84
[DYNAMIC CONTRAST]
     66
EEarly Warning Software    20
 button Remote control
    
 24,   54
[ECO MANAGEMENT]
     96
[EDGE BLENDING]
     74
 button Projector body
    
 27
Remote control
     24,   57
Expanding signal lock-in range
     11 6
F[FRAME RESPONSE]    76
[FREEZE]
     93
 button Remote control
    
 24,   51 Freeze function  
  
 51
Function button
     53
 button Remote control
    
 24,   53
[FUNCTION BUTTON]
     106
G[GAMMA]    65
H button
Remote control     24,   47
 button Remote control
    
 24,   47
[HDMI IN]
     85
I button
Remote control     24,   54
 button Remote control
    
 24,   54
[INITIALIZE]
     111
Initial setting
     42
[INITIAL
 STARTUP]
     105
[INPUT
 RESOLUTION]
     74
 button
Projector body
    
 27,   48
Installation mode
     30
LLight source indicator    148
List of compatible signals
     167
[LOAD 
ALL USER DATA]
     11 0
MMain menu     58
Main power switch
     27,   41
Maintenance
     150
 button Projector body
    
 27,   57
Remote control
     24,   57
Menu item
     59
 button Remote control
    
 24,   50
NNavigating through the menu    57
[NETWORK]
     61,   122
Network connection
     127
[NETWORK CONTROL]
     123
[NETWORK SETUP]
     123
[NETWORK ST
ATUS]
     124
[NOISE REDUCTION]
     66
O button
Remote control     24,   51
[ON-SCREEN DISPLAY]
     87
On-screen menu
     57
Optional accessories
     23
P[PICTURE]    59,   62
[PICTURE MODE]
     62
[P
 IN P]
     61,   112
 button Remote control
    
 24,   53
P IN P function
     11 2
[POSITION]
     59,   68
Power button Projector body
    
 27
Remote control
     24
Power cord
     40
Power indicator
     40
Precautions for attaching the Ceiling Mount 
Bracket
    
 174
Precautions for use
     17
Projecting
     47
[PROJECTION METHOD]
     95
Projector body
     26
[PROJECT
OR ID]
     95
[PROJECT
OR SETUP]
     60,   95
Protecting the registered signal
     11 6
R[RASTER POSITION]    77
Read this first!
     5
Registering new signals
     11 5
Remote control
     24 Remote control operations  
   50
Renaming the registered signal
     11 5
Resetting to the factory default
     58
 button Projector body
 
   27
Remote control
    24
[RS-232C]
    106,   163
S[SAVE ALL USER DATA]    11 0
[SCHEDULE]
    103
 button
Remote control
 
   24,   52
[SCREEN ADJUSTMENT]
    70
[SCREEN SETTING]
    80
Security
    19
[SECURITY]
    61,   118
[SECURITY PASSWORD]
     11 8
[SECURITY
 PASSWORD CHANGE]
     11 8
Selecting the input signal
    47
Self-test indication
    153
 terminal
    163
[SER
VICE PASSWORD]
    111
Setting ID number of the remote control
     54
Setting up
    30
[SHARPNESS]
    65
[SHIFT]
    68
 button Remote control
 
   24,   50
[SHUTTER SETTING]
    92
[SIGNAL
 LIST]
    61,   115
Specifications
    170
sRGB-compliant video
    67
[ST
ARTUP INPUT SELECT]
     105
[ST
ARTUP LOGO]
    90
[ST
ATUS]
    108
 button
Remote control
 
   24,   54
Sub memory
    11 7
Switching of
f the projector
    46
Switching on the projector
    41
[SYSTEM SELECT
OR]
    66
TTemperature indicator    148
[TEST
 PATTERN]
    61,   114
 button Remote control
 
   24,   53
[TEXT CHANGE]
    11 9
[TINT]
    63
T
roubleshooting
    151
T
wo-window
    166
U[UNIFORMITY]    91
V button Remote control     24,  47
Volume adjustment
    51
/ button Remote control
 
   24,   51
W[WAVEFORM MONITOR]    93
W
eb control
    130
[WHITE GAIN]
    64
Z[ZOOM]    69
Index   
						

							Information for Users on Collection and Disposal of Old Equipment and us\
ed Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and batteries should not be mixed with general household 
waste. For proper treatment, recovery and recycling of old products and used batteries, please 
take them to applicable collection points, in accordance with your national legislation and the 
Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources 
and prevent any potential negative effects on human health and the environment which could 
otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact 
your local municipality, your waste disposal service or the point of sale where you purchased the 
items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national 
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier 
for further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please 
contact your local authorities or dealer and ask for the correct method \
of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with 
the requirement set by the Directive for the chemical involved.
Product Information (for Turkey only)
AEEE Yönetmeliğine Uygundur.
Eski Ekipman ve Bataryaların İşlenmesi.
Sadece geri dönüşüm sistemleri olan Avrupa Birliği ve ülkeleri için geçerlidir.
Ürünler, ambalaj ve/veya ekli belgeler üzerindeki bu semboller kullanılmış elektrik ve elektronik 
ürünlerin ve pillerin genel ev atığı ile karıştırılmaması gerektiğini ifade eder.
Eski ürünlerin ve pillerin toplanması ve geri kazanılması için bu atıkları lütfen yasayla belirlenmiş 
olan uygun toplama merkezlerine teslim ediniz.
Bu atıkların doğru işlenmesiyle, değerli kaynakların korunmasına ve insan sağlığı ve çevreye 
olası negatif etkilerinin engellenmesine yardımcı olabilirsiniz.
Atıkların toplanması ve geri dönüşümü için detaylı bilgi için lütfen bağlı olduğunuz yerel 
yönetimlerle iletişime geçiniz.
Atıkların atılmasıyla ilgili yanlış uygulamalar yasayla belirlenmiş olan cezalara sebebiyet verebilir.
W0216NN1046 -YI
Panasonic System Communications Company of North America
5th Floor, Two Riverfront Plaza, Newark, NJ 07102-5490
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
Panasonic Corporation
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2016