Panasonic LCD Projector Pt Rz570 Operating Instructions
Have a look at the manual Panasonic LCD Projector Pt Rz570 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
Chapter 4 Settings — [SIGNAL LIST] menu
116 - ENGLISH
Note
fA registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press asqw to select the signal to protect.
2)
Press the button.
fThe
[REGISTERED SIGNAL STATUS] screen is displayed.
3)
Press the button.
fThe
[REGISTERED SIGNAL SETUP] screen is displayed.
4)
Press
as to select [LOCK].
5)
Press
qw to switch the item.
fThe items will switch...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-115.png "Page 116
Chapter 4 Settings — [SIGNAL LIST] menu
116 - ENGLISH
Note
fA registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press asqw to select the signal to protect.
2)
Press the button.
fThe
[REGISTERED SIGNAL STATUS] screen is displayed.
3)
Press the button.
fThe
[REGISTERED SIGNAL SETUP] screen is displayed.
4)
Press
as to select [LOCK].
5)
Press
qw to switch the item.
fThe items will switch...")
![Page 117
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 117
fIn an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when the
setting is set to [WIDE].
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is
recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to switch the aspect or adjust the...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-116.png "Page 117
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 117
fIn an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when the
setting is set to [WIDE].
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is
recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to switch the aspect or adjust the...")
![Page 118
Chapter 4 Settings — [SECURITY] menu
118 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
page 57) for the operation of the menu screen.
fWhen the projector is used for the first time
Initial password: Press awsqawsq in order
, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is prompted. Enter the preset password and...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-117.png "Page 118
Chapter 4 Settings — [SECURITY] menu
118 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
page 57) for the operation of the menu screen.
fWhen the projector is used for the first time
Initial password: Press awsqawsq in order
, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is prompted. Enter the preset password and...")
![Page 119
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 119
2) Press qw to switch the item.
fThe items will switch each time you press the button.
[OFF] Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA Y SETTING].
1)
Press...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-118.png "Page 119
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 119
2) Press qw to switch the item.
fThe items will switch each time you press the button.
[OFF] Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA Y SETTING].
1)
Press...")
![Page 120
Chapter 4 Settings — [SECURITY] menu
120 - ENGLISH
4) Press the button.
fThe
[CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5)
Press
as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
Press
qw to switch [USER].
7)
Press
as to select the button item to set.
fWhen [INPUT
SELECT BUTTON] is selected in [REMOTE CONTROL], press the button, and
then press as to select the button to set.
Buttons that can be set
[CONTROL PANEL] [REMOTE CONTROL]
[POWER BUTTON] Power...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-119.png "Page 120
Chapter 4 Settings — [SECURITY] menu
120 - ENGLISH
4) Press the button.
fThe
[CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5)
Press
as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
Press
qw to switch [USER].
7)
Press
as to select the button item to set.
fWhen [INPUT
SELECT BUTTON] is selected in [REMOTE CONTROL], press the button, and
then press as to select the button to set.
Buttons that can be set
[CONTROL PANEL] [REMOTE CONTROL]
[POWER BUTTON] Power...")
![Page 121
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 121
Attention
fThe initial password is “AAAA” as the factory default or when the [PROJECT OR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is
executed.
f Change the password periodically that is hard to guess.](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-120.png "Page 121
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 121
Attention
fThe initial password is “AAAA” as the factory default or when the [PROJECT OR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is
executed.
f Change the password periodically that is hard to guess.")
![Page 122
Chapter 4 Settings — [NETWORK] menu
122 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
page 57) for the operation of the menu screen.
[DIGITAL LINK MODE]
Switch the communication method of the terminal of the projector.
1)
Press
as to select [DIGITAL LINK MODE].
2)
Press
qw to switch the item.
fThe items will switch each time you press the button.
[AUTO] Switches the...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-121.png "Page 122
Chapter 4 Settings — [NETWORK] menu
122 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
page 57) for the operation of the menu screen.
[DIGITAL LINK MODE]
Switch the communication method of the terminal of the projector.
1)
Press
as to select [DIGITAL LINK MODE].
2)
Press
qw to switch the item.
fThe items will switch each time you press the button.
[AUTO] Switches the...")
![Page 123
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 123
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1)
Press
as to select [NETWORK SETUP].
2)
Press the button.
fThe
[NETWORK SETUP] screen is displayed.
3)
Press
as to select an item, and change the settings according to the operation instructions of the
menu.
[PROJECTOR NAME] Allows to change the projector name. Enter the host name if it is required to use a DHCP server.
[DHCP] [ON]
If a DHCP...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-122.png "Page 123
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 123
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1)
Press
as to select [NETWORK SETUP].
2)
Press the button.
fThe
[NETWORK SETUP] screen is displayed.
3)
Press
as to select an item, and change the settings according to the operation instructions of the
menu.
[PROJECTOR NAME] Allows to change the projector name. Enter the host name if it is required to use a DHCP server.
[DHCP] [ON]
If a DHCP...")
![Page 124
Chapter 4 Settings — [NETWORK] menu
124 - ENGLISH
[NETWORK STATUS]
Display the status of the projector network.
1)
Press
as to select [NETWORK STATUS].
2)
Press the button.
fThe
[NETWORK STATUS] screen is displayed.
[DHCP] Displays the status of use of the DHCP server.
[IP ADDRESS] Displays the [IP ADDRESS].
[SUBNET MASK] Displays the [SUBNET MASK].
[DEFAULT GATEWAY] Displays the [DEFAULT GATEWAY].
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-123.png "Page 124
Chapter 4 Settings — [NETWORK] menu
124 - ENGLISH
[NETWORK STATUS]
Display the status of the projector network.
1)
Press
as to select [NETWORK STATUS].
2)
Press the button.
fThe
[NETWORK STATUS] screen is displayed.
[DHCP] Displays the status of use of the DHCP server.
[IP ADDRESS] Displays the [IP ADDRESS].
[SUBNET MASK] Displays the [SUBNET MASK].
[DEFAULT GATEWAY] Displays the [DEFAULT GATEWAY].
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the...")
![Page 125
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 125
[Art-Net CHANNEL SETTING]
Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net
function” (x
page 157).
1)
Press
as to select [Art-Net CHANNEL SETTING].
2)
Press
qw to switch the item.
[2] Uses the channel assignment in standard setting.
[USER] Changes the channel assignment.
[1] Uses the channel assignment with DZ21K series compatible.
DZ21K...](http://img.usermanuals.tech/thumb/58/75988/w64_pt-rz570_en_om_d-124.png "Page 125
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 125
[Art-Net CHANNEL SETTING]
Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net
function” (x
page 157).
1)
Press
as to select [Art-Net CHANNEL SETTING].
2)
Press
qw to switch the item.
[2] Uses the channel assignment in standard setting.
[USER] Changes the channel assignment.
[1] Uses the channel assignment with DZ21K series compatible.
DZ21K...")
Chapter 4 Settings — [SECURITY] menu ENGLISH - 121 Attention fThe initial password is “AAAA” as the factory default or when the [PROJECT OR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is executed. f Change the password periodically that is hard to guess.
Chapter 4 Settings — [NETWORK] menu 122 - ENGLISH [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu. Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. [DIGITAL LINK MODE] Switch the communication method of the terminal of the projector. 1) Press as to select [DIGITAL LINK MODE]. 2) Press qw to switch the item. fThe items will switch each time you press the button. [AUTO] Switches the communication method automatically to DIGITAL LINK, long reach, or Ethernet. [DIGITAL LINK] Fixes the communication method to DIGITAL LINK. [LONG REACH] Fixes the communication method to long reach. [ETHERNET] Fixes the communication method to Ethernet. Possible communication modes l: Communication possible ―: Communication not possible Setting Communication possible Video transfer (100 m (328'1"))Video transfer (150 m (492'2"))Ethernet RS - 232C [AUTO] For DIGITAL LINK l― ll For long reach ― lll For Ethernet ―― l *1― [DIGITAL LINK] l― ll [LONG REACH] ― lll [ETHERNET] ―― l *1― *1 Communication via a twisted-pair-cable transmitter is not available. Connect the projector to the network directly . Note fThe maximum transmission distance when connected with the long-reach communication method is 150 m (492'2"). In this case, the signal that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency 148.5 MHz). fIf the communication method of the twist-pair-cable transmitter is set to long reach, the projector will connect with long-reach communication method when the item is set to [AUT O]. To connect with the optional DIGITAL LINK Switcher (Model No.: ET - YFB200G) with the long-reach communication method, set the item to [LONG REACH]. f Even when the item is set to [LONG REACH], connection will not be made correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method. [DIGITAL LINK STATUS] Display the DIGITAL LINK connection environment. 1) Press as to select [DIGITAL LINK STATUS]. 2) Press the button. fThe [DIGITAL LINK STATUS] screen is displayed. [LINK STATUS] One of [NO LINK], [DIGITAL LINK], [LONG REACH], or [ETHERNET] is displayed. [HDCP STATUS] One of [NO SIGNAL], [OFF], or [ON] is displayed. [SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to green, yellow, or red depending on that value. Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter . f[MAX]/[MIN]: Maximum/minimum value of the amount of error fGreen (-12 dB or lower) → normal signal quality level. fY ellow ( -11 to -8 dB) → caution level that noise may appear on the screen. f Red (-7 dB or higher) → abnormal level with interrupted synchronization and receiving not possible.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 123 [NETWORK SETUP] Perform the initial setting of the network before using the network function. 1) Press as to select [NETWORK SETUP]. 2) Press the button. fThe [NETWORK SETUP] screen is displayed. 3) Press as to select an item, and change the settings according to the operation instructions of the menu. [PROJECTOR NAME] Allows to change the projector name. Enter the host name if it is required to use a DHCP server. [DHCP] [ON] If a DHCP server exists in the network where the projector is to be connected, obtains the IP address automatically. [OFF] If a DHCP server does not exist in the network where the projector is to be connected, set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY]. [IP ADDRESS] Enter the IP address when a DHCP server is not used. [SUBNET MASK] Enter the subnet mask when a DHCP server is not used. [DEFAULT GATEWAY] Enter the default gateway address when a DHCP server is not used. 4) Press as to select [STORE], and press the button. 5) When the confirmation screen is displayed, press qw to select [OK], and press the button. Note f When using a DHCP server, confirm that the DHCP server is running. fConsult your network administrator regarding the IP address, subnet mask, and default gateway. fThe network setting is common for the terminal and the terminal. f[NETWORK SETUP] cannot be selected when the [NETWORK] menu → [Art-Net SETUP] is set to [ON(2.X.X.X)] or [ON(10.X.X.X)]. [NETWORK CONTROL] Set up the control method of the network. 1) Press as to select [NETWORK CONTROL]. 2) Press the button. fThe [NETWORK CONTROL] screen is displayed. 3) Press as to select an item, and press qw to change the setting. [WEB CONTROL] Set to [ON] to control with the web browser. [PJLink CONTROL] Set to [ON] to control with the PJLink protocol. [COMMAND CONTROL] Set to [ON] to control with the control command format (x page 165) for the terminal. Refer to “Control commands via LAN” ( x page 160). [COMMAND PORT] Set the port number used for command control. [Crestron Connected(TM)] Set to [ON] to control with Crestron Connected TM of Crestron Electronics, Inc. [AMX D.D.] Set to [ON] to control with the controller of AMX Corporation. Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, visit the website of AMX Corporation. URL http://www.amx.com/ [EXTRON XTP] Set to [ON] when connecting the “XTP transmitter” of Extron Electronics to the terminal. Set to [OFF] when connecting the optional DIGITAL LINK output supported device (Model No.: ET - YFB100G, ET - YFB200G). For details of the “XTP transmitter”, visit the website of Extron Electronics. URL http://www.extron.com/ 4) Press as to select [STORE], and press the button. 5) When the confirmation screen is displayed, press qw to select [OK], and press the button.
Chapter 4 Settings — [NETWORK] menu 124 - ENGLISH [NETWORK STATUS] Display the status of the projector network. 1) Press as to select [NETWORK STATUS]. 2) Press the button. fThe [NETWORK STATUS] screen is displayed. [DHCP] Displays the status of use of the DHCP server. [IP ADDRESS] Displays the [IP ADDRESS]. [SUBNET MASK] Displays the [SUBNET MASK]. [DEFAULT GATEWAY] Displays the [DEFAULT GATEWAY]. [DNS1] Displays the address of the preferred DNS server. [DNS2] Displays the address of the alternate DNS server. [MAC ADDRESS] Displays the [MAC ADDRESS]. Note fThe network setting is common for the terminal and the terminal. [DIGITAL LINK MENU] When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET- YFB200G) is connected to the terminal, the main menu of the connected DIGITAL LINK output supported device is displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details. Note f [DIGITAL LINK MENU] cannot be selected when the [NETWORK] menu → [NETWORK CONTROL] → [EXTRON XTP] is set to [ON]. [Art-Net SETUP] Make settings to use the Art-Net function. 1) Press as to select [Art-Net SETUP]. 2) Press qw to switch the item. fThe items will switch each time you press the button. [OFF] Disables the Art-Net function. [ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X. [ON(10.X.X.X)] Enables the Art-Net function and sets the IP address to 10.X.X.X. [ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [NETWORK SETUP]. fProceed to Step 3) when anything other than [OFF] is selected. 3) Press the button. f The [Art-Net SETUP] screen is displayed. 4) Press as to select an item, and press qw to switch the setting. [NET] Enter [NET] to be used when the projector processes Art-Net. [SUB NET] Enter [SUB NET] to be used when the projector processes Art-Net. [UNIVERSE] Enter [UNIVERSE] to be used when the projector processes Art-Net. [START ADDRESS] Enter [START ADDRESS] to be used when the projector processes Art-Net. 5) Press as to select [STORE], and press the button. 6) When the confirmation screen is displayed, press qw to select [OK], and press the button. Note f If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically. fThe network setting is common for the terminal and the terminal.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 125 [Art-Net CHANNEL SETTING] Set the assignment of the channel. For the channel definitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net function” (x page 157). 1) Press as to select [Art-Net CHANNEL SETTING]. 2) Press qw to switch the item. [2] Uses the channel assignment in standard setting. [USER] Changes the channel assignment. [1] Uses the channel assignment with DZ21K series compatible. DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series f When [2] or [1] is selected, the function assigned to the channel is displayed by pressing the button. fWhen [USER] is selected, proceed to Step 3) . 3) Press the button. f The [Art-Net CHANNEL SETTING] screen is displayed. 4) Press as to select the channel to set, and pressqw to switch the item. [LIGHT OUTPUT] Adjusts the amount of light. [INPUT SELECT] Switches the input. [POWER] Controls the power status. [SHUTTER] Controls the shutter function. [FADE-IN] Sets the fade-in time. [FADE-OUT] Sets the fade-out time. [SCREEN ADJUSTMENT] Performs screen correction. [FREEZE] Freezes the projected image, and turns off the audio. [COLOR] Adjusts the color saturation. [TINT] Adjusts the tint. [RASTER PATTERN] Displays the raster pattern. [VOLUME] Adjusts the volume. [ENABLE / DISABLE] Enables/disables the control of the projector with the Art-Net function. [NONE] No definition fThe setting can be also made by pressing as to select the channel, pressing the button to display the item list, pressing asqw to select the item, and pressing the button. fSame item cannot be set for multiple channels, except for [NONE]. [Art-Net STATUS] Display the content of control assigned to each channel and the received data of that channel. 1) Press as to select [Art-Net STATUS]. 2) Press the button. fThe [Art-Net STATUS] screen is displayed.
126 - ENGLISH Chapter 5 Operations This chapter describes how to use each function.
Chapter 5 Operations — Network connection ENGLISH - 127 Network connection The projector is equipped with the network function, and following is possible by connecting to a computer. fW eb control Setting, adjustment, and displaying status of the projector are possible by accessing the projector from a computer. Refer to “Web control function” (x page 130) for details. fMulti Monitoring & Control Software “Multi Monitoring & Control Software”, which is a software application to monitor and control multiple display devices (projector or flat panel display) connected via LAN, can be used. Refer to the Operating Instructions of the “Multi Monitoring & Control Software” in the supplied CD-ROM for details. fEarly W arning Software “Early Warning Software”, which is a software application to monitor the status of the display devices (projector or flat panel display) or the peripheral device within the intranet, and to notify the problem or to detect the sign of possible problem of the device, can be used. Visit the Panasonic website (http://panasonic.net/avc/projector/pass/) for details. f PJLink Operation or status query of the projector can be performed from a computer using the PJLink protocol. Refer to “PJLink protocol” ( x page 156) for details. fArt-Net Setting of the projector can be operated by the DMX controller or application software using the Art-Net protocol. Refer to “Using Art-Net function” (x page 157) for details. fCommand control Operation or status query of the projector can be performed from a computer using the control command. Refer to “Control commands via LAN” ( x page 160) for details. Connecting to the network The projector can be connected to the network using the terminal or the terminal. The Ethernet signal from a twisted-pair-cable transmitter can be received in the terminal together with the video, audio, and serial control signal via a LAN cable. f Use either of the terminal or the terminal when a twisted-pair-cable transmitter is not used. f T o connect a twisted-pair-cable transmitter that is not supporting send/receive of the Ethernet signal, use the terminal. f T o send/receive the Ethernet signal via a twisted-pair-cable transmitter , use the terminal. Example of a normal network connection Computer Projector LAN cable (straight) LAN cable (straight) Hub Attention fWhen a LAN cable is directly connected to the projector , the network connection must be made indoors. Note fA LAN cable is required to use the network function.
Chapter 5 Operations — Network connection 128 - ENGLISH fConnect a LAN cable to send/receive the Ethernet signal to the terminal or the terminal of the projector. fUse a straight or crossover LAN cable that is compatible with CA T5 or higher . Either the straight or the crossover cable, or both cables can be used depending on the system configuration. Consult your network administrator . The projector will determine the type of the cable (straight or crossover) automatically. f Use a LAN cable of 100 m (328'1") or shorter. Example of network connections via a twisted-pair-cable transmitter Computer Projector LAN cable (straight) LAN cable (straight) LAN cable (straight) Twisted-pair-cable transmitter Hub Attention f When a LAN cable is directly connected to the projector , the network connection must be made indoors. Note fFor the LAN cable between the twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria: gConforming to CA T5e or higher standards gShielded type (including connectors) gStraight-through gSingle wire fThe maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). It is possible to transmit up to 150 m (492'2") if the twisted-pair-cable transmitter supports the long-reach communication method. However , the signal that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency 148.5 MHz) for the long-reach communication method. If this distance is exceeded, image may be disrupted or a malfunction may occur in LAN communication. f When laying cables between the twisted-pair-cable transmitter and the projector , confirm that cable characteristics are compatible with CA T5e or higher using tools such as a cable tester or cable analyzer . When a relay connector is used, include it in the measurement. f Do not use a hub between the twisted-pair-cable transmitter and the projector . fDo not pull cables forcefully . Also, do not bend or fold cables unnecessarily. fT o reduce the effects of noise as much as possible, stretch out the cables between the twisted-pair-cable transmitter and the projector without any loops. f Lay the cables between the twisted-pair-cable transmitter and the projector away from other cables, particularly power cables. fWhen laying multiple cables, run them side by side along the shortest distance possible without bundling them together . fAfter laying the cables, go to the [NETWORK] menu → [DIGITAL LINK STATUS] and confirm that the value of [SIGNAL QUALITY] is displayed in green which indicates normal quality. f For twisted-pair-cable transmitters of other manufacturers of which the operation has been verified with the projector , visit the Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective manufacturers. Setting the projector 1) Connect the projector to a computer using a LAN cable. 2) T urn on the power of the projector. 3) Press the button to open the [NETWORK] menu, select [NETWORK SETUP], and press the button. 4) Perform the [NETWORK SETUP] setting. fRefer to [NETWORK SETUP] ( x page 123) for details. Note f To connect to an existing network, perform after consulting your network administrator.
Chapter 5 Operations — Network connection ENGLISH - 129 rFactory default setting fFollowing setting has been made as a factory default. [DHCP] OFF [IP ADDRESS] 192.168.0.8 [SUBNET MASK] 255.255.255.0 [DEFAULT GATEWAY] 192.168.0.1 [DNS1]/[DNS2] None Operating the computer 1) Turn on the power of the computer. 2) Perform the network setting following the instruction of your network ad\ ministrator . fOperation from the computer is possible by configuring the network setting of the computer as follows if the projector is in the factory default setting. [IP ADDRESS] 192.168.0.10 [SUBNET MASK] 255.255.255.0 [DEFAULT GATEWAY] 192.168.0.1
Chapter 5 Operations — Web control function 130 - ENGLISH Web control function Following operation is possible from a computer using the web control function. fSetting and adjustment of the projector fDisplay of the projector status fSending E-mail messages when there is a problem with the projector The projector supports “Crestron Connected TM”, and the following application software of Crestron Electronics, Inc. can be used. f RoomV iew Express f Fusion R V f RoomV iew Server Edition Note f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand. f“Crestron ConnectedTM” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems connected to a network using a computer. f For details of the “Crestron ConnectedTM”, visit the website of Crestron Electronics, Inc. (English only .) URL http://www.crestron.com Download “RoomView Express” from the Crestron Electronics, Inc. website. (English only.) URL http://www.crestron.com/getroomview Computer that can be used for setting To use the web control function, a web browser is required. Confirm that the web browser can be used in advance. OS Compatible browser Windows Internet Explorer 9.0/10.0/11.0, Microsoft Edge Mac OS Safari 6.0/7.0/8.0/9.0 Accessing from the web browser 1) Start up the web browser on the computer. 2) Enter the IP address set on the projector into the URL entry field of the web browser. 3) Enter the user name and the password. fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case).