Panasonic LCD Projector Pt Rz570 Operating Instructions

							Chapter 5 Operations — Web control function
ENGLISH - 131
4) Click OK.
 fThe [Projector status] page is displayed.
Note
 f If you use a web browser to control the projector , set the [NETWORK] menu → [NETWORK CONTROL] → [WEB CONTROL] to [ON]. fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   143)
 fAccess will be locked for few minutes when an incorrect password is entered three times consecutively . fSome items on the projector setting page use the Javascript function of the web browser . Correct control may not be possible when the web 
browser is set not to use this function.
 f If the screen for the web control is not displayed, consult your network administrator . fWhile updating the screen for the web control, the screen may appear white for a moment, but it is not a malfunction. fScreenshot of a computer
The size or the display of the screen may be dif

ferent from this manual depending on the OS or the Web browser, or the type of computer in 
use.
Rights for each account
The administrator rights allow use of all functions. There is a limitation in the rights that can be used with the user 
rights. Select the rights depending on the purpose.
The function that has l in the administrator rights/user rights column indicates that it can be operated with that 
rights.
Item FunctionAdministrator rights User rights Page
[Projector status] [Projector status]
ll132
Error information page ll133
[Network status] ll134
[Access error log] l―
135
[Mail error log] l―
135
[Projector control] [Basic control]
ll136
[Detail control] l―
136
[Detailed set up] [Network config]
l―
137
[Adjust clock] l―
138
[Ping test] l―
138
[E-mail set up] l―
139
[Authentication set up] l―
140
[ECO management set up] l―
140
[Change password] User name of [Administrator]
l―
143
User name of [User] l―
144
Password of [Administrator] l―
143
Password of [User] ll144, 
144
[Crestron Connected(TM)] Operation page
l―
145
[Tools] l―
145
[Info] l―
146
[Help] l―
146   
						

							Chapter 5 Operations — Web control function
132 - ENGLISH
Descriptions of items
1
2
3
4
5
6
1 Page tab
Switches pages by clicking this item.
2
 
[Status]
The status of the projector is displayed by clicking this item.
3

 
[Projector control]
The [Projector control] page is displayed by clicking this item. 4

 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5
 
[Change password]
The [Change password] page is displayed by clicking this item.
6

 
[Crestron Connected(TM)]
The operation page of Crestron ConnectedTM is displayed by 
clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
16
17 6
9
7
8
1
2
3
4
5
10
11
12
15 14
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of the shutter function ([CLOSE]: Enabled 
(closed), [OPEN]: Disabled (open)).
5

 
[OPERA
 TING MODE]
Displays the setting status of [OPERATING MODE].
6
 
[SERIAL
  NUMBER]
Displays the serial number of the projector.
7
 
[OSD]
Displays the status of the on-screen display

.
8
 
[VOLUME]
Display the volume status.
9

 
[LIGHT OUTPUT]
Displays the setting status of [LIGHT

 OUTPUT].10
 [INPUT]
Displays the status of the selected input.
11
 [INT

AKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
12
 
[OPTICS MODULE TEMPERA
 TURE]
Displays the status of the internal temperature of the projector.
13
 
[EXHAUST AIR 
 TEMPERATURE]
Displays the status of the exhaust air temperature of the 
projector.
14
 
[LIGHT TEMPERA
 TURE1], [LIGHT TEMPERATURE2]
Displays the temperature status of the light source.
15
 
[LIGHT]
Displays the lighting status and runtime of the light source.
16

 
[SELF TEST]
Displays the self-diagnosis information.
17

 
[PROJECT
 OR RUNTIME]
Displays the runtime of the projector.   
						

							Chapter 5 Operations — Web control function
ENGLISH - 133
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status] 
screen, click it to display the content of the error/warning.
 fThe projector may go into the standby status to protect the projector depending on the contents of the error .
1
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[F
AILED]:
Indicates that there is a problem.
[WARNING]:
Indicates that there is a warning.
 r [FAILED] items
Item Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your dealer.
[FAN] There is a problem with the fan or the fan drive circuit. Consult your dealer .
[INTAKE AIR TEMPERATURE] The intake air temperature is high. The projector may be used in an environment where 
the temperature is high, such as near a heating appliance.
[OPTICS MODULE TEMPERATURE] The temperature around the optics module inside the projector is high. The projector 
may be used in an environment where the temperature is high, such as near a heating 
appliance.
[EXHAUST AIR TEMPERATURE] The exhaust air temperature is high. The projector may be used in an environment 
where the temperature is high, such as near a heating appliance. Or the air exhaust port 
may be blocked.
[LIGHT TEMPERATURE1] The temperature of the light source is high. The projector may be used in an 
environment where the temperature is high, such as near a heating appliance.
[LIGHT TEMPERATURE2]
[LIGHT STATUS] The light source has failed to turn on. Consult your dealer.
[INTAKE AIR TEMP.SENSOR] There is a problem with the sensor used to detect intake air temperature. Consult your 
dealer.
[OPTICS MODULE TEMP.SENSOR] There is a problem with the sensor used to detect temperature inside the projector
. 
Consult your dealer.
[EXHAUST AIR TEMP.SENSOR] There is a problem with the sensor used to detect exhaust air temperature. Consult your 
dealer.
[LIGHT TEMP.1 SENSOR] There is a problem with the temperature detection sensor of light source. Consult your 
dealer.
[LIGHT TEMP.2 SENSOR]
[COLOR WHEEL] There is a problem with the color wheel or the color wheel drive circuit. Consult your 
dealer.
[BRIGHTNESS SENSOR] There is a problem with the luminance sensor. If problems persist even after switching 
on the power, consult your dealer.
[ANGLE SENSOR] There is a problem with the angle sensor. Consult your dealer.
[ATM SENSOR] There is a problem with the air pressure sensor. Consult your dealer.
[PHOSPHOR WHEEL] There is a problem with the phosphor wheel or phosphor wheel drive circuit. Consult 
your dealer.   
						

							Chapter 5 Operations — Web control function
134 - ENGLISH
 r[WARNING] items
Item Description
[LOW-TEMPERATURE] The temperature around the optics module inside the projector is low
. Image cannot be 
projected until the optics module becomes warm.
[INTAKE AIR TEMPERATURE] The intake temperature is high. The projector may be used in an environment where the 
temperature is high, such as near a heating appliance.
[OPTICS MODULE TEMPERATURE] The temperature around the optics module inside the projector is high. The projector 
may be used in an environment where the temperature is high, such as near a heating 
appliance.
[EXHAUST AIR TEMPERATURE] The exhaust air temperature is high. The air exhaust port may be blocked.
[LIGHT TEMPERATURE1] The temperature of the light source is high. The projector may be used in an 
environment where the temperature is high, such as near a heating appliance.
[LIGHT TEMPERATURE2]
[BATTERY] Battery replacement is required. Consult your dealer.
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.   
						

							Chapter 5 Operations — Web control function
ENGLISH - 135
[Access error log] page
Click [Status] → [Access error log].
The error log on the web server is displayed such as access to the pages that do not exist or access with 
unauthorized user names or passwords.
[Mail error log] page
Click [Status] → [Mail error log].
E-mail error log is displayed if periodic E-mail sending has failed.
Note
 f[Access error log] and [Mail error log] display the recent few thousand accesses/requests.  All information may not be displayed when many 
accesses/requests are made at once.
 f Logs in [Access error log] and [Mail error log] are deleted from the oldest when exceeding a certain amount. fCheck [Access error log] and [Mail error log] periodically

.   
						

							Chapter 5 Operations — Web control function
136 - ENGLISH
[Basic control] page
Click [Projector control] → [Basic control].
1
2
3
4
6
5
1 [POWER]
T
urns on/off the power.
2
 
[SHUTTER]
Switches whether to use the shutter function (enabled (shutter: 
closed)/disabled (shutter: open)).
3

 
[OSD]
Switches on (display)/of

f (hide) the on-screen display function. 4
 [SYSTEM]
Switches the system method.
5
 
On-screen display of the projector
Displays the same items as shown on the on-screen display 
of the projector

. You can check or change the settings of the 
menus. It is displayed even if the on-screen display function is 
set to off (hide).
6
 
[INPUT SELECT]
Switches the input signal.
[Detail control] page
Click [Projector control] → [Detail control].
4 3
5 2 1
8 7 6
9
1 Control of the projector
The projector is controlled by clicking the buttons in the same 
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is 
updated.
2
 
[SUB MEMOR
 Y]
Switches the sub memory.
3
 
[DA
 YLIGHT VIEW]
Switches the day light view setting.
4
 
[FREEZE]
T

emporarily pauses the image. 5
 [P  IN P]
Switches the P IN P setting.
6
 
[W
 AVEFORM MONITOR]
Displays the waveform of the input signal.
7
 
[MUTE]
Switches whether to use the mute function.
8

 
[TEST P
 ATTERN]
Displays the test pattern.
9
 
[GET OSD]
Updates the on-screen display of the projector at the right of the 
control page.   
						

							Chapter 5 Operations — Web control function
ENGLISH - 137
[Network config] page
Click [Detailed set up] → [Network config].
 fClick [Network config] to display the  [CAUTION!]

 screen.
 fClick the [Next] button to display the current settings.
 fClick the [Change] button to display the setting change screen.
1
2
3
4
5
6
7
8
1 [PROJECT OR NAME]
Enter the name of the projector. Enter the host name if it is 
required when using a DHCP server etc.
2
 
[DHCP
  ON], [DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
3
 
[IP
  ADDRESS]
Enter the IP address when not using a DHCP server.
4
 
[SUBNET MASK]
Enter the subnet mask when not using a DHCP

 server.
5
 
[DEF
 AULT GATEWAY]
Enter the default gateway address when not using a DHCP 
server. 6
 [DNS1]
Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server address 
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
7
 
[DNS2]
Enter the DNS2 server address.
A

vailable characters for the entry of DNS2 server address 
(secondary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.254)
8
 
[Back], [Next]
Click the [Back] button to return to the original screen. Click the 
[Next] button to display the setting confirmation screen. Click 
the [Submit] button to update the setting.
Note
 fWhen you use the “Forward” and “Back” functions of your browser , a warning message “Page has Expired” may appear. In that case, click 
[Network config] again since the following operation will not be guaranteed.
 f The connection may be disconnected when the LAN setting is changed while connected with LAN.   
						

							Chapter 5 Operations — Web control function
138 - ENGLISH
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
4
5
6
7
1 [Time Zone]
Select the time zone.
2
 
[Set time zone]
Updates the time zone setting.
3

 
[NTP
  SYNCHRONIZATION]
Set [ON] when adjusting the date and time automatically.
4
 
[NTP
  SERVER NAME]
Enter the IP address or server name of the NTP server when 
you set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be set up.) 5
 [Date]
Enter the date to be changed.
6
 
[T
 ime]
Enter the time to be changed.
7
 
[Submit]
Updates the date and time settings.
Note
 fThe replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult 
your dealer
.
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up]  → [Ping test].
1
2 3
4
1 [Input IP  address]
Enter the IP address of the server to be tested.
2
 
[Submit]
Executes the connection test. 3

 Example of display when the connection has succeeded
4  
Example of display when the connection has failed   
						

							Chapter 5 Operations — Web control function
ENGLISH - 139
[E-mail set up] page
When there is a problem or the runtime of the light source reaches the preset value, an E-mail can be sent to 
previously set E-mail addresses (up to two addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]
Select [ENABLE] to use the E-mail function.
2
 
[SMTP
  SERVER NAME]
Enter the IP address or the server name of the E-mail server 
(SMTP). To enter the server name, the DNS server needs to be 
set up.
3
 
[MAIL
  FROM]
Enter the E-mail address of the projector. (Up to 63 characters 
in single byte)
4
 
[MEMO]
Enter information such as the location of the projector that 
notifies the sender of the E-mail. (Up to 63 characters in single 
byte) 5

 [MINIMUM TIME]
Change the minimum interval for the temperature warning 
E-mail. 
The default value is 60 minutes. In this case, another 
E-mail will not be sent for 60 minutes after sending the 
temperature warning E-mail even if it reaches the warning 
temperature.
6
 
[INT
 AKE AIR TEMPERATURE]
Change the temperature setting for the temperature warning 
mail. A temperature warning E-mail is sent when the 
temperature exceeds this value.
8
7
9
8
7
7 [E-MAIL  ADDRESS 1], [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 
2] blank when two E-mail addresses are not to be used. 8
 Settings of the conditions to send E-mail
Select the conditions to send E-mail.
[MAIL
 CONTENTS]: 
Select either [NORMAL] or [SIMPLE].
[ERROR]: 
Send an E-mail when an error occurred in the self-diagnosis.
[INTAKE AIR TEMPERATURE]: 
Send an E-mail when the intake air temperature has reached 
the value set at the above field.
[PERIODIC REPORT]: 
Place a check mark on this to send an E-mail periodically.
It will be sent on the days and time with the check mark.
9
 
[Submit]
Update the settings.   
						

							Chapter 5 Operations — Web control function
140 - ENGLISH
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
7
8
1 [Auth]
Select the authentication method specified by your Internet 
service provider
.
2
 
[SMTP
  Auth]
Set when the SMTP authentication is selected.
3
 
[POP
  server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4
 
[User name]
Enter the user name for the POP

 server or the SMTP server. 5
 [Password]
Enter the password for the POP
 server or the SMTP server.
6
 
[SMTP
  server port]
Enter the port number of the SMTP server.
(Normally 25)
7
 
[POP
  server port]
Enter the port number of the POP server.
(Normally 110)
8
 
[Submit]
Update the settings.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
1
2
3
4
5
6
1 [OPERATING MODE]
Select the [OPERATING MODE] setting.
2
 
[AUT
 O POWER SAVE]
Set [ON] when setting [AMBIENT LIGHT DETECTION] and [NO 
SIGNAL LIGHT-OUT].
3
 
[AMBIENT LIGHT DETECTION]
Enables ([ON])/disables ([OFF]) the ambient light detection 
function. 4

 [NO SIGNAL  LIGHT-OUT]
Select the duration until the light source is turned off when the 
no signal light-out function is used.
5
 
[NO SIGNAL
  SHUT-OFF]
Select the duration until the standby mode is entered when the 
no signal shut-off function is used.
6
 
[Submit]
Updates the setting.
Note
 fFor details of each setting item, refer to the [PROJECT OR SETUP] menu of the projector → [ECO MANAGEMENT].