Panasonic LCD Projector Pt Lw330 Operating Instructions

ENGLISH - 41
button
1) Press the  button on the remote control.
 
f It will switch each time you press the button, [  (Normal)] → [  (Eco 1)] →[  (Eco 2)].
Note
 
f For details, please refer to the [Setting] menu → [Lamp control] ( x page 56).
Using the digital zoom function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged. 
 buttons
1) Press the  or < D.ZOOM -> button on the...

42 - ENGLISH
Using the mute function
This button allows you to turn off the audio output temporarily.
button
1) Press the  button on the remote control. 
 
f The audio turns off.
2)  Press the  button again.
 
f The audio turns on.
Using the Daylight View Lite function
The Daylight View Lite function improves the vividness of the image even if it is proj\
ected under a bright light.
button
1)  Press the  button on the remote control. 
 
f The Daylight View Lite function will be switched enable/disable...

ENGLISH - 43
Chapter 4   Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.  

44 - ENGLISH
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
1) Press the  button on the remote control or the control panel.
 
f The main menu screen appears.
2)  Press as to select an item from the main menu.
 
f The selected item is highlighted in orange.
3)  Press the  button.
 
f The submenu is displayed, and submenu items become selectable.
(there is no lower menu under the...

ENGLISH - 45
5) Press as to switch or adjust settings.
 
f Some items will switch in order as follows each time you press as.
ABC
6)  Press the  button or the  button.
 
f The changed settings or the adjusted value is confirmed. 
7)  Press as to select a sub-menu item, press the  button.
 
f Switches to the next layer of the menu screen.
8)  Press the  button.
 
f If the selected item can be set or adjusted,  will be displayed.
9)  Press as to switch or adjust settings.
 
f Some items will switch in...

46 - ENGLISH
Sub-menu
The sub-menu screen of the selected main menu appears, and you can set a\
nd adjust the various items in the submenu.
[Display]  
Sub-menu itemFactory default Page
[Auto PC adj.]*1- 49
[Fine sync]*1- 49
[H Position]*1- 49
[V Position]*1- 50
[H.Size]*1- 50
[Aspect] [Normal]50
[Project way] [Front]51
[Menu position] [Upper left]51
[Background display] [Blue]51
[System] -51
*1  Only for computer signals.
[Color adjust]  
Sub-menu item Factory default Page
[Image mode] [Standard]52...

ENGLISH - 47
Sub-menu itemFactory default Page
[Auto setup] -59
[Keystone] [Store]61
[Logo] -64
[Security] -66
[Power management] [Shut down]67
[Filter counter] -68
[Test pattern] [Off]68
[Network] -69
[Remote control] [All]70
[Factory default] -70
[Memory Viewer]*1  
Sub-menu item Factory default Page
[Set Slide] -71
[Slide Transition Effect] [Slide Right]71
[Sort Order] [Name Order]71
[Rotate] [No Rotate]71
[Best Fit] [Off]72
[Repeat] [Off]72
[Apply] -72
*1  Only for PT-LW330, PT-LW280, PT-LB360 and...

48 - ENGLISH
[Input] menu
To select the input source directly by pressing the input selection butto\
ns on the remote control or to select the 
input source in the [Input] screen by pressing the  button \
on the control panel.
Switching the input source
When using the remote control
1) Press the input selection (, , , ,\
 ) buttons. 
 
f To project the corresponding input signal of the selected terminal.
 Switches to Computer 1/Component input.
 Switches to Computer 2 input.
 Switches to HDMI input....

ENGLISH - 49
[Display] menu
On the menu screen, select [Display] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
 
f After selecting the item, press as to set.
[Auto PC adj.]
(Only for computer signals input)
When input the computer (RGB) signals, the image may be moved up, down, left or right such as flickering, press the  button to adjust [Fine sync], [H position], [V position] and [H.Size]...

50 - ENGLISH
OrientationOperation Adjustment
Horizontal (left and  right) adjustment. Press the a button.
The image position moves to the right.
Press the s button.The image position moves to the left.
Note
 
f [H Position] is not available while the image is expanded in the digital zoom function.
[V Position]
(Only for computer signals input)
Move the image position vertically if the image position projected on th\
e screen is shifted even when the relative position of the 
projector and the screen is...