Panasonic LCD Projector Pt Lw330 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Lw330 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
ENGLISH - 61
[Keystone]
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select one item.
[Keystone] Sets whether or not to keep the keystone correction after turn off the projector or plug out
the power cord.
[V Keystone]
*1Adjusts when the vertical trapezoid of the projected image is distorted.
[H/V Keystone] Adjusts...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-60.png "Page 61
ENGLISH - 61
[Keystone]
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select one item.
[Keystone] Sets whether or not to keep the keystone correction after turn off the projector or plug out
the power cord.
[V Keystone]
*1Adjusts when the vertical trapezoid of the projected image is distorted.
[H/V Keystone] Adjusts...")
ENGLISH - 61 [Keystone] You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted. 1) Press as to select [Keystone]. 2) Press the button. f The [Keystone] screen is displayed. 3) Press as to select one item. [Keystone] Sets whether or not to keep the keystone correction after turn off the projector or plug out the power cord. [V Keystone] *1Adjusts when the vertical trapezoid of the projected image is distorted. [H/V Keystone] Adjusts...
Page 62
![Page 62
62 - ENGLISH
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [H/V Keystone].
4) Press the button.
f The [H/V Keystone] individual adjustment screen is displayed.
5) Press asqw to adjust the item.
Items Operation Adjustment
Horizontal Press the w button.
Adjusts the right of the keystone.
Press the q button. Adjusts the left of the keystone.
Vertical Press the a button.
Adjusts the upper of the keystone.
Press the s button.Adjusts the bottom of the keystone.
Note...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-61.png "Page 62
62 - ENGLISH
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [H/V Keystone].
4) Press the button.
f The [H/V Keystone] individual adjustment screen is displayed.
5) Press asqw to adjust the item.
Items Operation Adjustment
Horizontal Press the w button.
Adjusts the right of the keystone.
Press the q button. Adjusts the left of the keystone.
Vertical Press the a button.
Adjusts the upper of the keystone.
Press the s button.Adjusts the bottom of the keystone.
Note...")
62 - ENGLISH 2) Press the button. f The [Keystone] screen is displayed. 3) Press as to select [H/V Keystone]. 4) Press the button. f The [H/V Keystone] individual adjustment screen is displayed. 5) Press asqw to adjust the item. Items Operation Adjustment Horizontal Press the w button. Adjusts the right of the keystone. Press the q button. Adjusts the left of the keystone. Vertical Press the a button. Adjusts the upper of the keystone. Press the s button.Adjusts the bottom of the keystone. Note...
Page 63
![Page 63
ENGLISH - 63
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [Curved correction].
4) Press the button.
f The [Curved correction] screen is displayed.
5) Press asqw to adjust the item.
Items Operation Adjustment
[Curved
correction X/Y
Gain] Press the w button.
Extend the vertical lines to left and
right.
Press the q button.Dent the vertical lines to left and right.
Press the a button.
Extend the horizontal lines to top and
bottom.
Press the s button.Dent the...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-62.png "Page 63
ENGLISH - 63
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [Curved correction].
4) Press the button.
f The [Curved correction] screen is displayed.
5) Press asqw to adjust the item.
Items Operation Adjustment
[Curved
correction X/Y
Gain] Press the w button.
Extend the vertical lines to left and
right.
Press the q button.Dent the vertical lines to left and right.
Press the a button.
Extend the horizontal lines to top and
bottom.
Press the s button.Dent the...")
ENGLISH - 63 2) Press the button. f The [Keystone] screen is displayed. 3) Press as to select [Curved correction]. 4) Press the button. f The [Curved correction] screen is displayed. 5) Press asqw to adjust the item. Items Operation Adjustment [Curved correction X/Y Gain] Press the w button. Extend the vertical lines to left and right. Press the q button.Dent the vertical lines to left and right. Press the a button. Extend the horizontal lines to top and bottom. Press the s button.Dent the...
Page 64
![Page 64
64 - ENGLISH
f Screen size will also change when [H/V Keystone] is used to perform various adjustments.
f Aspect ratio of the image size may shift depending on the correction.
Resetting the keystone correction
(Only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330)
To return to the factory default state by releasing the state of the keys\
tone correction.
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [Reset value].
4) Press the...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-63.png "Page 64
64 - ENGLISH
f Screen size will also change when [H/V Keystone] is used to perform various adjustments.
f Aspect ratio of the image size may shift depending on the correction.
Resetting the keystone correction
(Only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330)
To return to the factory default state by releasing the state of the keys\
tone correction.
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [Reset value].
4) Press the...")
64 - ENGLISH f Screen size will also change when [H/V Keystone] is used to perform various adjustments. f Aspect ratio of the image size may shift depending on the correction. Resetting the keystone correction (Only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330) To return to the factory default state by releasing the state of the keys\ tone correction. 1) Press as to select [Keystone]. 2) Press the button. f The [Keystone] screen is displayed. 3) Press as to select [Reset value]. 4) Press the...
Page 65
![Page 65
ENGLISH - 65
5) A confirmation screen is displayed, press as to select [Yes] and then press the button.
f After capturing the image, the [Logo select] is set to [User]. The captured image will be displayed when the projector
start-up next time.
Note
f Only supports still image-based computer (RGB) and still image-based HDMI signals input.
f Capture may not be available depending on the input signal.
f It is recommended to capture the same resolution signal as the display dots (panel...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-64.png "Page 65
ENGLISH - 65
5) A confirmation screen is displayed, press as to select [Yes] and then press the button.
f After capturing the image, the [Logo select] is set to [User]. The captured image will be displayed when the projector
start-up next time.
Note
f Only supports still image-based computer (RGB) and still image-based HDMI signals input.
f Capture may not be available depending on the input signal.
f It is recommended to capture the same resolution signal as the display dots (panel...")
ENGLISH - 65 5) A confirmation screen is displayed, press as to select [Yes] and then press the button. f After capturing the image, the [Logo select] is set to [User]. The captured image will be displayed when the projector start-up next time. Note f Only supports still image-based computer (RGB) and still image-based HDMI signals input. f Capture may not be available depending on the input signal. f It is recommended to capture the same resolution signal as the display dots (panel...
Page 66
![Page 66
66 - ENGLISH
f The [Logo PIN code] input screen is displayed.
5) Press the button.
6) Press as to enter the current Logo PIN code from 0 to 9 and press the bu\
tton.
7) Press the button.
f The [New logo PIN code] input screen is displayed.
8) Enter the new Logo PIN code you have set according to the steps in "Ente\
r a Logo PIN code".
Note
f If you want to correct the digit, press as to reset the digit and then press as re-enter it.
f Press the button after moving the cursor to...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-65.png "Page 66
66 - ENGLISH
f The [Logo PIN code] input screen is displayed.
5) Press the button.
6) Press as to enter the current Logo PIN code from 0 to 9 and press the bu\
tton.
7) Press the button.
f The [New logo PIN code] input screen is displayed.
8) Enter the new Logo PIN code you have set according to the steps in \"Ente\
r a Logo PIN code\".
Note
f If you want to correct the digit, press as to reset the digit and then press as re-enter it.
f Press the button after moving the cursor to...")
66 - ENGLISH f The [Logo PIN code] input screen is displayed. 5) Press the button. 6) Press as to enter the current Logo PIN code from 0 to 9 and press the bu\ tton. 7) Press the button. f The [New logo PIN code] input screen is displayed. 8) Enter the new Logo PIN code you have set according to the steps in "Ente\ r a Logo PIN code". Note f If you want to correct the digit, press as to reset the digit and then press as re-enter it. f Press the button after moving the cursor to...
Page 67
![Page 67
ENGLISH - 67
[On]The [PIN code] screen will be displayed when turn on the projector
. The projector cannot be
operated without entering the PIN code.
[Off] The projector can be operated without the PIN code.
Note
f If you want to correct the digit, press the button to reset the d\
igit and then re-enter it.
f Press the button after moving the cursor to [Cancel] to return the menu screen.
f If you entered an incorrect digit, the digit ( ) will turn red and reset, and then re-enter a digit.
[PIN...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-66.png "Page 67
ENGLISH - 67
[On]The [PIN code] screen will be displayed when turn on the projector
. The projector cannot be
operated without entering the PIN code.
[Off] The projector can be operated without the PIN code.
Note
f If you want to correct the digit, press the button to reset the d\
igit and then re-enter it.
f Press the button after moving the cursor to [Cancel] to return the menu screen.
f If you entered an incorrect digit, the digit ( ) will turn red and reset, and then re-enter a digit.
[PIN...")
ENGLISH - 67 [On]The [PIN code] screen will be displayed when turn on the projector . The projector cannot be operated without entering the PIN code. [Off] The projector can be operated without the PIN code. Note f If you want to correct the digit, press the button to reset the d\ igit and then re-enter it. f Press the button after moving the cursor to [Cancel] to return the menu screen. f If you entered an incorrect digit, the digit ( ) will turn red and reset, and then re-enter a digit. [PIN...
Page 68
![Page 68
68 - ENGLISH
Setting [Ready Countdown] in step 3)
The time from the state which the management function is working to the standby mode can be set to 0 ~ 30 minutes when
[Power management] is set to [Ready]. The increment is 1 minute.
1) Press as to select [Ready Countdown].
2) Press the button.
3) Press as to switch the setting time.
f The items will switch each time you press the button.
[0 Min] The ready mode of the power management function is continued.
[1 Min] ~ [30 Min] From the ready mode...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-67.png "Page 68
68 - ENGLISH
Setting [Ready Countdown] in step 3)
The time from the state which the management function is working to the standby mode can be set to 0 ~ 30 minutes when
[Power management] is set to [Ready]. The increment is 1 minute.
1) Press as to select [Ready Countdown].
2) Press the button.
3) Press as to switch the setting time.
f The items will switch each time you press the button.
[0 Min] The ready mode of the power management function is continued.
[1 Min] ~ [30 Min] From the ready mode...")
68 - ENGLISH Setting [Ready Countdown] in step 3) The time from the state which the management function is working to the standby mode can be set to 0 ~ 30 minutes when [Power management] is set to [Ready]. The increment is 1 minute. 1) Press as to select [Ready Countdown]. 2) Press the button. 3) Press as to switch the setting time. f The items will switch each time you press the button. [0 Min] The ready mode of the power management function is continued. [1 Min] ~ [30 Min] From the ready mode...
Page 69
![Page 69
ENGLISH - 69
[Off]Test pattern is not displayed.
[Gray scale 1]
Select a test pattern so that it is easy to make various adjustments.
[Gray scale 2]
[Gray scale 3]
[Gray scale 4]
[Color bar]
[Red]
[Green] [Blue]
[Cross hatch] [White][Black]
[Raster gray]
4) Press the button.
f The selected test pattern is displayed and the menu screen is disappeare\
d.
Note
f Press the button to display the menu screen and select [Of f] in [Test pattern] when you want to cancel the Test
pattern function....](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-68.png "Page 69
ENGLISH - 69
[Off]Test pattern is not displayed.
[Gray scale 1]
Select a test pattern so that it is easy to make various adjustments.
[Gray scale 2]
[Gray scale 3]
[Gray scale 4]
[Color bar]
[Red]
[Green] [Blue]
[Cross hatch] [White][Black]
[Raster gray]
4) Press the button.
f The selected test pattern is displayed and the menu screen is disappeare\
d.
Note
f Press the button to display the menu screen and select [Of f] in [Test pattern] when you want to cancel the Test
pattern function....")
ENGLISH - 69 [Off]Test pattern is not displayed. [Gray scale 1] Select a test pattern so that it is easy to make various adjustments. [Gray scale 2] [Gray scale 3] [Gray scale 4] [Color bar] [Red] [Green] [Blue] [Cross hatch] [White][Black] [Raster gray] 4) Press the button. f The selected test pattern is displayed and the menu screen is disappeare\ d. Note f Press the button to display the menu screen and select [Of f] in [Test pattern] when you want to cancel the Test pattern function....
Page 70
![Page 70
70 - ENGLISH
[Network information]
1) Press as to select [Network].
2) Press the button.
f The [Network] screen is displayed and then confirm the following items.
[MAC address] Displays the MAC address of this projector.
[IP address] Displays the current IP address of this projector.
[Remote control]
This switching function prevents remote control interference when operat\
ing several projectors or video equipment at the same
time.
1) Press as to select [Remote control].
2) Press the button.
f...](http://img.usermanuals.tech/thumb/58/75982/w300_pt-lw330_en_om_d-69.png "Page 70
70 - ENGLISH
[Network information]
1) Press as to select [Network].
2) Press the button.
f The [Network] screen is displayed and then confirm the following items.
[MAC address] Displays the MAC address of this projector.
[IP address] Displays the current IP address of this projector.
[Remote control]
This switching function prevents remote control interference when operat\
ing several projectors or video equipment at the same
time.
1) Press as to select [Remote control].
2) Press the button.
f...")
70 - ENGLISH [Network information] 1) Press as to select [Network]. 2) Press the button. f The [Network] screen is displayed and then confirm the following items. [MAC address] Displays the MAC address of this projector. [IP address] Displays the current IP address of this projector. [Remote control] This switching function prevents remote control interference when operat\ ing several projectors or video equipment at the same time. 1) Press as to select [Remote control]. 2) Press the button. f...