Panasonic LCD Projector Pt Lw330 Operating Instructions

ENGLISH - 71
[Memory Viewer] menu
On the menu screen, select [Memory Viewer] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
 
f After selecting the item, press as to set.
Note
 
f Memory Viewer function is only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330.
 
f The [Memory Viewer] menu is available when input the [Memory Viewer] signal.
 
f The menu except for [Set Slide] which settings have been changed...

72 - ENGLISH
 
f The items will switch each time you press the button.
[No rotate] Rotate is disabled.
[270 Degrees] Rotates 270 degrees in anti-clockwise direction.
[180 Degrees] Rotates 180 degrees.
[90 Degrees] Rotates 90 degrees in anti-clockwise direction.
[Best Fit]
Set the image whether or not to fit with the projected screen.
1) Press as to select [Best Fit].
2)  Press the  button.
3)  Press as to switch the item
.
 
f The items will switch each time you press the button.
[On] Displays the image...

ENGLISH - 73
[Info.] menu 
On the menu screen, select [Info.] from the main menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
[Info.]
Display the status of the projector.
1) Press as to select [Info.].
 
f The [Info.] screen is displayed.
 
f You can also press the  button on the remote control. (x page 40)
[Input] The selected input source and the system are displayed.
[H-sync freq.] The horizontal frequency of the input signal is displayed in kHz. [- - - - ]...

74 - ENGLISH
Network control
Network connections
The projector has a network function, and the following operations are available from the computer using the web browser 
control. 
f Setting and adjustment of the projector.
 
f Display of the projector status.
Note
 
f A LAN cable is required to use the network function.
 
r Example of a normal network connection
 
f A Web browser is required to use this function. Confirm that the Web browser can be used beforehand.  
Compatible Web Browser : Internet...

ENGLISH - 75
Note
 
f Please confirm with your network administrator before you connect to an existing network.
 
f The following settings are set before the projector leaves the factory.
[DHCP] Off
[IP address] 192.168.1.100
[Subnet] 255.255.255.0
[Gateway] 192.168.1.1
[DNS] 192.168.1.1
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings before chang -
ing any settings.
1)   Turn on the computer.
2)  Make the network setting...

76 - ENGLISH
Description of each item
12
3
4
5
1  [System Status]
The [System Status] page is displayed by clicking this 
item.
2  [General Setup]
The [General Setup] page is displayed by clicking this 
item.
3  [Picture Setup]
The [Picture Setup] page is displayed by clicking this 
item. 4 
[Image Setup]
The [Image Setup] page is displayed by clicking this 
item.
5  [Network Setup]
The [Network Setup] page is displayed by clicking 
this item.
[System status] page
Display the status of the projector for...

ENGLISH - 77
[Picture Setup] page
1
2
3
4
5
6
1 [Brightness]
Adjusts the brightness of the projected image.
2  [Contrast]
Adjusts the contrast of the projected image.
3  [Sharpness]
Adjusts the sharpness of the projected image. 4 
[Color]
Adjusts the color saturation of the projected image.
5  [Tint]
Adjusts the skin tone of the projected image.
6  [Color temperature]
Adjusts the color temperature of the projected 
image.
[Image Setup] page
1
2
3
4
8
9
10
11
5
6
7
Chapter 4   Settings - Network control  

78 - ENGLISH
1 [Aspect]
Switches the aspect of the projected image.
2  [Fine sync]
Adjusts the fine sync of the projected image.
3  [H Position]
Adjusts the horizontal position of the projected image.
4  [V Position]
Adjusts the vertical position of the projected image.
5  [H.Size]
Adjusts the total number of dots of the projected 
image.
6  [Freeze]
Switches the freeze function between on and off. 7 
[Auto PC adj.]
Executes the Auto PC adj. function.
8  [V Keystone]
Corrects the keystone in vertical...

ENGLISH - 79
Using useful functions
Memory Viewer function
The Memory Viewer function makes it is possible to project the video and pictures wh\
ich are stored in the USB memory when 
the USB memory is inserted into the projector.
 
r What you can project with the Memory Viewer function
Memory Viewer function supports the following image files.
Video Extension
Video codec Audio codec Video format
avi MotionJpeg ADPCMYUV 4:4:4, YUV 4:2:2, YUV 4:2:0
Maximum : 1 280 x 720, 30 fps
PictureExtension
Format...

80 - ENGLISH
Executing the slide
All pictures in the same folder will play automatically when [Sort Order] and [Slide Transition Effect] and so on of [Memory 
Viewer] menu are set to the special setting.
1)  Press asqw  on the remote control to select a file.
2)  Press the  button to select the [Memory Viewer] → [Set Slide].
3)  Press the  button on the remote control.
 
f The picture will display on the full screen.
 
f Press the  button to return to the thumbnail screen.
Note
 
f If you press the...