Panasonic Kx Wt125 Operating Instructions

Configuring Handset Settings
61
Sub ItemDescription SettingDefault
Headset Mic 
Vol Adjusts the headset 
microphone volume. Level
	 1-4Level 1
Talk On 
Charger Selects whether or 
not to continue the 
conversation when 
the handset is put on 
the charger during a 
conversation. •	
On
Off
•	
Off
Answer Option
Sub Item Description SettingDefault
Any Key 
Answer Answers a call by 
pressing any dialing key. •	
On
Off
•	 Off
Quick 
Answer Answers a call while the 
phone is charging by 
just lifting up a...

Configuring Handset Settings
62
Sub ItemDescription SettingDefault
HOLD/XFER 
Key Selects the function of 
the HOLD/TRANSFER 
Key. •	
Hold
Hold
•	 Transfer
Display Option
Sub Item Description SettingDefault
Language Selects the display 
language. •	
Auto
Auto
•	
English
•	 Español
•	 FRANÇAIS
Backlight Turns on the backlight of 
the LCD and keypad. •	
On
On
•	 On & Receiving
•	 Off
LCD 
Contrast Adjusts the LCD 
contrast. Level
	 1-5Level 3
Standby 
Display Selects what is shown 
on the display while in...

Configuring Handset Settings
63
Sub ItemDescription SettingDefault
Caller ID 
Disp Selects which caller 
information is displayed 
when a call is received.
Either the information 
stored in the Handset 
Phonebook or the PBX 
can be displayed. •	
H/S Phonebook
PBX Setting
•	
PBX Setting
CO Status 
Disp Selects whether the CO 
status is shown on the 
display. •	
On
On
•	 Off
*
1 If an extension name is stored in the PBX, the extension name is display\
ed when 
"H/S No. " or "Base & H/S No....

Configuring Handset Settings
64
Sub ItemDescription SettingDefault
System Lock  Selects whether to 
lock the System Option 
setting or not. •	 On*
3
Off
•	 Off
Change PIN Before registering your 
handset with a PBX, 
enter the PBX’s PIN 
here. Once you have 
registered the handset 
with a PBX, this PIN 
can be changed so 
that the handset can 
be registered to an 
additional PBX. Enter the PIN 
number. (max. 8 
digits)
1234
*
1 Only registered bases are shown.
*2 You can select multiple bases...

Configuring Handset Settings
65
Sub ItemDescription SettingDefault
Reset 
Handset Returns the handset 
settings to its default 
settings. Enter Password.
(4 digits)
Not selected
↓
	
Select the desired 
item(s).↓

	
Press "

OK".
Phonebook 
Lock Locks/unlocks the 
Phonebook while the 
handset is in standby 
mode.  •	
On
Off
•	
Off
*
1 Make a note of the password so that you will not forget it.
*2 If	a	password	has	not	already	been	set,	you	can	skip	the	first	step.
*3 XX	is	identical	to	the	CO	line...

Configuring Handset Settings
66
[Select the alarm mode‑Once/Daily]
Enter memo.
[Once]
Enter date and time.*1[Daily]
Enter time.
Press the  
center soft 
key. Press the  
center soft 
key
.
Press the 
center soft key 
for Save.
[Select the alarm mode‑Weekly]
Select the 
desired day 
of the week.
Enter memo. Enter time.
Press the 
right 
soft key.
*2
Press the  
center soft 
key.
Press the  
center soft 
key. Press the  
center soft 
key.Press the 
center soft 
key for Save.
[Select the alarm mode‑Off]...

Configuring Handset Settings
67
To delete the alarm mode setting
Select 9:Memo 
Alarm.
Press the  
center soft 
key.
Press the  
center soft 
key. Press the  
center soft 
key. Select the 
alarm number. 
(1-3)
Press the right 
soft key. Select Yes.
To stop the alarm
Press the  
center soft 
key.ORPress 
CANCEL
.   

Troubleshooting and Error Messages
68Troubleshooting and Error Messages
Troubleshooting
Problem
Possible Cause Solution
The handset 
does not work. The batteries are drained.
Charge the batteries fully.
(See "Charging the Batteries" 
on page
  6.)
The power is off. Re-insert
	 the 	 batteries, 	 and 	
then set the handset on 
the charger

. (See "Battery 
Installation" on page
  5, and 
"Charging the Batteries" on 
page
  6.)
The handset 
does not ring. Ringer volume is set to...

Troubleshooting and Error Messages
69
ProblemPossible Cause Solution
The handset 
stops working 
during operation. Re-insert
	 the 	 batteries 	 and 	
try again.
(See "Battery Installation" on 
page

  5.)
You cannot use 
the handset 
during a power 
failure. The handset will not 
function during a power 
failure because the PBX 
stops emitting radiowaves.
The headset 
does not work. A headset tone cannot be 
heard when receiving an 
incoming call when the 
headset is attached. •	
Make sure the...

Troubleshooting and Error Messages
70
ProblemPossible Cause Solution
"No Service " 
is displayed, and 
beep tones are 
heard. The handset is out of 
range.
Move closer to the CS or try 
again later.
The CS or PBX is out of 
service. Consult your dealer.
The CO Status 
does not appear. •	
The software version of 
the PBX/CS/card does 
not support this feature.
•	 The "CO Status Display 
in Standby" setting on 
the PBX is not enabled.
•	 The Single CO line 
registered in the "Single 
CO...