Panasonic Kx Wt125 Operating Instructions

Troubleshooting and Error Messages
71
ProblemPossible Cause Solution
•	 The CO Status 
Display is 
displayed as 
"
‑
" in standby 
mode or when 
receiving 
a call as a 
member of a 
PS ring group.
•	 During 
operation, the 
CO Status 
Display is 
not displayed 
correctly, 
such as being 
displayed as 
"
‑
". •	
The software version of 
the PBX/CS/card does 
not support this feature.
•	 The “CO Status Display 
in Standby” setting on 
the PBX is not enabled.
•	 The Single CO line...

Troubleshooting and Error Messages
72
ProblemPossible Cause Solution
The handset 
does not operate 
according to 
the settings 
specified for 
Doorphone 
in "Setting 
Handset ". The settings for a PS ring 
group were used for the 
incoming call.
•	
When you receive a call 
as a member of a PS 
ring group, the handset 
operates according to the 
"Group Ring " settings 
in "Setting Handset ", 
even if the call is from a 
doorphone. To make the 
handset operate according 
to the...

Troubleshooting and Error Messages
73
Error Message Possible CauseSolution
Charge 
Battery The handset batteries have 
little charge remaining. Charge the batteries fully. 
(See "Charging the Batteries" 
on page
  6.)
Use 
Rechargeable 
Battery The installed batteries are 
not rechargeable.
Replace the installed 
batteries with rechargeable 
ones.
No Entries When trying to view the 
Phonebook: No items have 
been stored. (See "Storing 
an Item in the Handset 
Phonebook" on page
  43.)...

Important Information
74Important Information
Battery InformationAfter your Panasonic batteries are fully charged (at 25 °C [77 °F]):
Operation
Operating Time
While in use (Talk) Up to about 8
  h (Voice Clarity: OFF)
Up to about 7
  h (Voice Clarity: ON)
While not in use (Standby) Up to about 168
  h (when NOT using 
CO Status Display)
Up to about 150
  h (when using CO 
Status Display)
•	 Operating time may be shorter than listed above depending on usage condi\
tions 
and ambient temperature.
•	 The...

Important Information
75
A nickel metal hydride battery that is recyclable powers the product you \
have purchased.
Please	 call 	 1-800-8-BATTERY
	
 for 	 information 	 on 	 how 	 to 	 recycle 	 this 	
battery

.
Important Safety InstructionsWhen using your telephone equipment, basic safety precautions, including\
 those 
below,	 should 	 always 	 be 	 followed 	 to 	 reduce 	 the 	 risk 	 of 	 fire, 	 electric 	 shock 	 and 	 injury 	
to persons.
•	Do not use the product near water

, for example,...

Important Information
76
B. If liquid has been spilled into this product.
C.  If the product has been exposed to rain or water .
D.
 
If the product does not operate according to this manual. 
 Adjust only the 
controls that are explained in this manual. Improper adjustment of other\
 
controls
	
may
 	
result
 	
in
 	
damage
 	 and 	
may
 	
require
 	 service 	
by
 	
a
 	
qualified
 	 technician 	
to restore the product to normal operation.
E.

 
If the product has been dropped or damaged.
F

.  
If...

Important Information
77
•	Do not place metal items such as coins or rings on the charger. As they become 
hot, you might get burnt if you touch them.
•	 When you leave the product unused for a long period of time, unplug the \
AC 
adaptor from the outlet.
•	 The AC adaptor is used as the main disconnect device. Ensure that the AC outlet 
is installed near the product and is easily accessible.
For Best PerformanceOperating Range•	 The 	 range 	 of 	 operation 	 depends 	 on 	 the 	 topography 	 of 	 your...

Important Information
78
•	Do not use liquid cleaners or aerosol cleaners.
•	 Clean the terminal of the charger periodically.
Placement•	Do not place heavy objects on top of the handset and charger.
•	 Care should be taken so that objects do not fall onto, and liquids are n\
ot spilled 
into, the product.
•	 Place
	 the 	 charger 	 on 	 a 	 flat 	 surface. 	 If 	 the 	 charger 	 is 	 mounted 	 on 	 the 	 wall, 	 install 	 it 	
straight.
Security Information•	To avoid unauthorized access to this product:...

Important Information
79
Note
This equipment has been tested and found to comply with the limits for a\
 Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a resid\
ential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction\
s, may cause 
harmful interference to radio communications. However, there is...

Important Information
80
If trouble is experienced with this equipment, for repair or warranty in\
formation, 
please contact:
Panasonic	 Service 	 and 	
T
 echnology 	 Company-BTS 	 Center
415
	 Horizon 	 Drive 	 Bldg. 	 300 	 Ste. 	 350-B
Suwanee,
	 GA
	
 30024-3186
If the equipment is causing harm to the telephone network, the telephone\
 company 
may request that you disconnect the equipment until the problem is resol\
ved.
Hearing Aid CompatibilityThis	telephone	provides	magnetic	coupling	for...