Panasonic Kx Wt125 Operating Instructions

 Model No.    KX-WT125/KX-WT126
Operating Instructions
DECT 6.0 Portable Station
Thank you for purchasing a Panasonic DECT 6.0 Portable 
Station.
Please read this manual carefully before using this 
product and save this manual for future use.
Please use only the batteries provided and charge the 
batteries for about 7 hours before using the handset for 
the first time.
Document Version 2010-10  

Table of Contents
2
Before Initial Use .............................................................. 4Accessories (included) ........................................................................\
 4
Installation ........................................................................\
..................... 5Battery Installation .... ........................................................................\
.................. 5
Charger Connection ........

Table of Contents
3
Private Ring ............................................................................\
.......................... 42Storing an Item in the Handset Phonebook ..................................... 43Storing a New Item .... ........................................................................\
............... 43
Editing a Stored Item  .... ........................................................................\
............ 44
Storing an Item Using Predialing
 .......

Before Initial Use
4Before Initial Use
Please read "Important Information" on page 74 before using. Read and 
understand all instructions.
Accessories (included)
AC adaptor: 1
[Part No.]
PQLV219
Charger: 1 Battery: 2Belt Clip: 1
[Part No.] [Part No.]
PNWEWT125M PNKE1103Z1
Belt Clip Holder: 1 Battery Cover: 1 Screws and Washers: 2
[Part No.]
[Part No.] [Part No.]PQHE5004Y (Screw)
PSKE1040Z4 PNKK1038Z1XWG35FJ (Washer)
•	 To order accessories, call toll free  1
‑
800
‑
332
‑
5368 .   

Before Initial Use
5
Installation
Battery InstallationOpen the battery cover, insert the batteries, and close the cover as indicated below.
Charger ConnectionConnect the AC adaptor to the charger.
To AC OutletHooks
•	 The	AC 	 adaptor 	 should 	 be 	 connected 	 to 	 a 	 vertically 	 oriented 	 or 	 floor-mounted 	AC
	 outlet. 	 Do 	 not 	 connect 	 the 	AC 	 adaptor 	 to 	 a 	 ceiling-mounted 	AC 	 outlet, 	 as 	 the 	
weight of the adaptor may cause it to become disconnected.
•	 Fasten the 

AC adaptor...

Before Initial Use
6
Charging the BatteriesAt the time of shipment, the batteries are not charged. Please charge the batteries 
for about 7  hours before using the handset for the first time .
•	When the batteries are fully charged, the charge indicator 
goes off and "" is displayed. For more information, see 
"Battery Information" on page   74.
•	 It is normal for the handset and charger to feel warm while 
the batteries are charging.
•	 Keep
	
devices
	
sensitive 	 to 	 magnetic...

Before Initial Use
7
Attaching the Belt ClipYou can attach the handset to your belt by following the steps below.[To attach]
1Insert the clip into the designated notches in the 
handset.
2Slide the clip into the holder until it clicks.
[To remove]
1Make sure to turn the handset 180°  when you 
take it off.
2 Remove the belt clip.
Note
When you attach the phone strap to the handset with the belt clip attach\
ed, use the 
strap holes on the belt clip instead of the ones on the handset.   

Before Operating the Handset
8Before Operating the Handset
Location of Controls
The headset is an 
optional accessory. 
Please use only a 
Panasonic headset 
below.
KX
- TCA93/KX - TCA94/
KX
- TCA95/KX - TCA400/
KX
- TCA430A
B
C
D
E F
G
H
I
J
K
L
M
Open the cover.
[Back View]O N
A Ringer/Charge Indicator
B TALK/SP
‑
PHONE (Speakerphone) Key
Used
	
to
	
make
	
or
	
answer
	
calls,
	
or
	
toggle
	
between
	
the
	
Receiver/Hands-free 	 *
1 
mode during a conversation. 
C FLASH Key
Used to disconnect the...

Before Operating the Handset
9
ICANCEL Key
Used to end calls or exit Function mode.
J Navigator Key
Used to adjust the ringer/receiver volume or move the cursor to select a\
n 
item.
In standby mode, pressing each arrow enables the following functions:
UP
	

→ 	 Opens 	 the 	 Phonebook 	 Menu.
DOWN (REDIAL) → Displays the Redial List.
LEFT (INT') → Makes or answers intercom calls.
RIGHT (LINE) →
	 Displays 	 a 	 list 	 of 	 flexible 	 CO 	 keys.
K HOLD/TRANSFER/CLEAR Key
Used to place a call on hold...

Before Operating the Handset
10
Silent ModeSilent Mode turns off the ringer and sets the handset to vibrate *1 when calls are 
received. This can be useful in situations where you do not want to be disturbed, \
such as during a meeting.
Press  for more than 2 seconds to 
set/cancel the Silent Mode. [Display Icon]
Silent Mode
When Silent Mode is active, the microphone’s sensitivity is increased, and the 
following features are turned off automatically, regardless of their settings.
 – Ringer V

olume
 –...