Panasonic Kx Tg9581 Operating Instructions Manual

Changing the start and end time
Handset / Base unit
1 MMENU N#237
2 Continue from step 3 for handset or step 3 for
base unit, “Turning silent mode on/off”,
page 50.
Call block
This feature allows the unit to reject calls when:
– the unit receives a call from a phone number stored in the call block list as unwanted (“Storing
unwanted callers”, page 51).
– the unit receives a call without phone number (“Blocking incoming calls that have no phone
number”, page 51).
When a call is received, the unit rings...

Setting the first ring for the call block list
Handset / Base unit
If you do not want the first ring from a number on
the call block list to sound, turn the first ring setting
to  “Off ”. The default setting is  “On ”.
1 MMENU N#173
2 Mb N: Select the desired setting.  a M SAVE N
3 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
Viewing/editing/erasing call block numbers
Handset
1 MMENU N#217
2 Mb N: Select the desired entry.
R To exit, press  MOFF N.
3 To edit a...

3Handset:
Press  MOK N, then wait until a long beep
sounds.
Deregistering a handset
A handset can cancel its own registration to the
base unit, or other handsets registered to the
same base unit. This allows the handset to end its
wireless connection with the system.
Handset / Base unit
1 MMENU N#131
R All handsets registered to the base unit are
displayed.
2 Mb N: Select the handset you want to cancel.
a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 Proceed with the operation for your unit.
Handset:  M...

Using Caller ID serviceImportant:
R This unit is Caller ID compatible. To use Caller
ID features, you must subscribe to a Caller ID
service. Contact your service provider/telephone
company for details.
Caller ID features
Handset / Base unit
When an outside call is being received, the caller
information is displayed.
Caller information for the last 50 callers is logged
in the caller list from the most recent call to the
oldest.
R If the unit cannot receive caller information, the
following is displayed:...

Base unit
1 MCID N
2 Press  MC N to search from the most recent call,
or  MD N to search from the oldest call.
3 To call back, press the desired cellular line key
(M CELL 1 N to  MCELL 4 N), then lift the corded
handset.
To exit, press  MEXIT N.
n  Using a landline
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M C N CID
Base unit:  M CID N
2 Press  MC N to search from the most recent call,
or  MD N to search from the oldest call.
3 Proceed with the operation for your unit....

For example, you can use this feature to set the
unit to ignore the area code of callers in your area,
so that you can call these local numbers using
caller information without dialing the area code.
To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller’s area code are
edited automatically.
This feature can be set for each unit (page 48).
The default setting is “On ”.
Note:
R Phone numbers from the 4 most recently edited...

Copying phonebook from acellular phone (phonebook
transfer)
You can copy phonebook entries from the paired
cellular phones or other cellular phones (not
paired) to the unit’s phonebook. A cellular phone
must be compatible with Bluetooth wireless
technology.
Important:
R Your cellular phone must support Phone Book
Access Profile (PBAP) or Object Push Profile
(OPP) specification.
R If a copied entry has 2 or more phone numbers,
each phone number (6 max.) is stored as a
separate entry with the same name.
R...

4Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.
Text message (SMS) alert
This feature sets the handset and base unit to
notify the arrival of a new text message on a
cellular phone that is paired with the base unit.
This notification is displayed momentarily on both
the handset and the base unit, and announced.
The announcement is in English only.
The default setting is  “Off ”....

RIf you are using a corded headset and a
Bluetooth headset at the same time, the corded
headset is used.
Pairing a headset to the base unit
Important:
RMake sure that the Bluetooth headset is not
connected to any other Bluetooth device.
Handset / Base unit
1 Your headset:
Set your headset to pairing mode.
RRefer to the headset operating instructions.
2 MMENU N#621
3 If your headset PIN is “ 0000”, go to step 4.
If your headset PIN is other than “ 0000”,
press  MCLEAR N, then enter your headset PIN.
R...

Call sharing between your headset and the
handset
Important:
RTo activate this feature, you should set call
sharing mode to on beforehand (page 48).
n While the handset is on a landline call:
To join the conversation with your headset, turn
on the headset referring to your headset
operating instructions.
R Call sharing is only available for the line
selected in the line selection mode (page 18).
n While your headset is on a landline call:
To join the conversation with the handset, press
M L1 N or  ML2...