Panasonic Kx Tg9581 Operating Instructions Manual

unit. This feature allows the base unit to try to
reconnect the Bluetooth devices at regular
intervals when it returns within base unit range.
You can set the interval. The default setting is “1
min ”.
Program this setting using either the base unit or
one of the handsets.
Important:
R When you are using a cellular line or a
Bluetooth headset, the base unit loses its
connection from other Bluetooth devices
(cellular phone or headset). To automatically
resume the connection to Bluetooth devices,
leave...

Base unit: M EXIT N
Changing the Bluetooth PIN
(Personal Identification Number)
The PIN is used to pair cellular phones to the base
unit. The default PIN is  “0000 ”. To prevent
unauthorized access to this product, we
recommend that you change the PIN, and keep it
confidential.
Program this setting using either the base unit or
one of the handsets.
Important:
R Please make note of your new PIN. The unit
does not reveal the PIN to you. If you forget
your PIN, see page 78.
Handset / Base unit
1 MMENU...

Making cellular callsImportant:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the
corresponding CELL indicator on the base unit
lights up (page 16).
1 Lift the handset and dial the phone number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 21).
Go to step 4.
3 Mb N: Select the desired cellular phone.  a
M SELECT N
4 When you finish talking, press...

Answering calls1 Lift the handset and press  M
N or  MZ N when
the unit rings.
R To answer a cellular call, you can also press
MCELL N.
R The called landline is automatically
selected. To change the line selection
mode, see page 18.
R You can also answer the landline call by
pressing  ML1 N or  ML2 N.
2 When you finish talking, press  MOFF N or place
the handset on the charger.
Any key answer:  You can answer the call by
pressing any dial key.
Auto talk:  You can answer calls simply by lifting
the...

Handset clarity boosterThis feature can improve sound clarity when the
handset is used in an area where there may be
interference. During an outside call, this feature is
turned on automatically when necessary.
Handset noise reductionThis feature allows you to hear the voice of the
person you are talking to clearly, by reducing the
surrounding noise coming from the other party’s
telephone.
Press  MNOISE REDUCTION N to turn on/off while
talking.
Note:
R Depending on the environment where this
handset is...

RTo hang up only one line, press  ML1 N or
M L2 N for the party with which you want to
continue talking.
R To put both lines on hold, press  MMENU N.
a  M b N:  “Hold ” a  M SELECT N
– To resume both lines, press  MCONF N.
– To talk with only one caller, press  ML1 N or
M L2 N for the party with which you want to
continue talking.
Conference call with an outside call and an
intercom call
While you are talking with an outside caller, one
more extension can join the conversation and
establish a conference...

Making cellular callsImportant:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the
corresponding CELL indicator lights up
(page 16).
1 Dial the phone number.
RTo correct a digit, press  MCLEAR N.
2 Press the desired cellular line key ( MCELL 1 N
to  MCELL 4 N).
3 Lift the corded handset.
4 When you finish talking, place the corded
handset on the cradle.
Note:
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode...

Pause (for PBX/long distance service users)A pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed
(page 39).
Example:  If you need to dial the line access
number “9” when making outside calls with a PBX:
1 9 a  M PAUSE N
2 Dial the phone number.
3 Lift the corded handset.
Note:
R A 3.5 second pause is inserted each time
MPAUSE N is pressed.
Answering calls
1 Lift the corded...

If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd caller’s
information is displayed after you hear the call
waiting tone on the base unit.
1 Press  MCALL WAIT N to answer the 2nd call.
2 To switch between calls, press  MCALL WAIT N.
Note:
R Please contact your service provider/telephone
company for details and availability of this
service in your area.
Temporary tone dialing for landline
calls (for rotary/pulse service users)
Press  * (TONE) before entering access...

Transferring a cellular call between
the base unit and a cellular phone
Transferring a cellular call from the base unit
to a cellular phone
During a cellular call, press and hold the
corresponding cellular line key (MCELL 1 N to
M CELL 4 N), then place the corded handset on the
cradle after confirming whether the cellular call is
transferred to the cellular phone.
Transferring a cellular call from a cellular
phone to the base unit
During a conversation using a cellular phone,
press the corresponding...