Panasonic Kx Tg9541 Operating Instructions Manual

Note:
RAfter you copy the entries, confirm that the
numbers were transferred correctly.
Text message (SMS) alert
This feature sets the handset and base unit to
notify the arrival of a new text message on a
cellular phone that is paired with the base unit.
This notification is displayed momentarily on both
the handset and the base unit, and announced.
The announcement is in English only.
The default setting is  “On ”.
Important:
R To use the text message alert feature, you need
to pair your cellular...

Handset / Base unit
1 Your headset:
Set your headset to pairing mode.
RRefer to the headset operating instructions.
2 MMENU N#621
3 If your headset PIN is “ 0000”, go to step 4.
If your headset PIN is other than “ 0000”,
press  MCLEAR N, then enter your headset PIN.
R Typically, default PIN is  “0000 ”. Refer to
the headset operating instructions.
4 Press  MOK N, then wait until a long beep
sounds.
5 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
R When the HEADSET...

nWhile your headset is on a landline call:
To join the conversation with the handset, press
M
N .
R An available line is automatically selected. To
change the line selection mode, see page 16.
Adjusting your headset receiver volume
Base unit
Press  MD N or  MC N repeatedly while using your
headset.
For assistance, please visit http://www.panasonic.com/help53
Using Bluetooth Devices

TG954x(en)_0528_ver011.pdf   532013/05/28   11:09:54  

Answering system for
landline
The answering system can answer and record
calls for you when you are unavailable to answer
the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only ” as the greeting
setting (page 61).
Answering system settings can be set for each line.
Important:
R Make sure the date and time have been set
correctly (page 16).
Memory capacity (including your
greeting message)
The total recording capacity for both lines...

–“Greeting2 ”: The answering system only
plays  “Greeting2 ” for all calls.
– “Greeting1&2 ”: The answering system
announces either  “Greeting1 ” or
“ Greeting2 ”, depending on the time of the
incoming call. *1
– “Greeting1&Only ”: The answering system
announces either  “Greeting1 ” or  “Greeting
only ”, depending on the time of the incoming
call. *1
– “Greeting only ”: The answering system
only plays  “Greeting only ” for all calls.
Program this setting using either the base unit or
one of the...

3MYES N
4 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
Playing back the greeting message
Handset / Base unit
1 For line 1:  MMENU N#3031
For line 2:  MMENU N#3032
2 Mb N: Select the desired greeting message.  a
M SELECT N
3 Proceed with the operation for your unit.
Handset:  To exit, press  MOFF N.
Base unit:  To exit, press  MEXIT N.
Listening to messages
using the base unit
When new messages have been recorded:
– M
N on the base unit flashes.
– “New message ” is...

Operating the answering system
MMENU N a  M b N:  “Answering device ” a
M SELECT N a  M b N: Select the desired line.  a
M SELECT N
KeyOperation
MD N or  MC NAdjust the receiver/speaker volume
(during playback)
1  or  MF NRepeat message (during
playback) *1
2
 or  ME NSkip message (during playback)
3Enter the  “Settings ” menu
4Play new messages
5Play all messages
8Turn answering system on
MPAUSE NPause message *2
9
 or
M STOP NStop recording
Stop playback
0Turn answering system off
*4*3Erase currently...

Important:
RA new message alert is stopped 1 minute after
the unit starts to call. The unit will not retry the
call even if the call is not answered.
Storing a phone number to which the unit
makes an alert call
Handset
n From the phonebook:
1 For line 1:  MMENU N#3381
For line 2:  MMENU N#3382
2 Mb N:  “Alert to ” a  M SELECT N a  M ADD N
3 Mb N:  “Phonebook ” a  M SELECT N
4 Mb N: Select the desired phonebook entry.
a  M SAVE N a  M OFF N
n By entering a phone number:
1 For line 1:  MMENU N#3381
For...

Activating/inactivating the remote access code
to play messages
If you activate this feature, you must enter the
remote access code (page 59) to play the new
message from the new message alert call. This is
so that unauthorized parties cannot listen to your
messages. The default setting is “Inactivate ”.
– “Inactivate ”: You can listen to the message
by pressing  4 to play new messages (without
entering the remote access code).
– “Activate ”: You must enter your remote
access code (page 59) and then...

Voice guidance
nWhen the English voice guidance is selected
During remote operation, the unit’s voice
guidance starts and prompts you to press  1 to
perform a specific operation, or press  2 to
listen to more available operations.
n When the Spanish voice guidance is selected
To start the voice guidance, press  9. The voice
guidance announces the available remote
commands (page 60).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the unit
disconnects your...