Panasonic Kx Tg9541 Operating Instructions Manual

Sub-menu 1Sub-menu 2SettingsCodeUnit
Set date & timeDate and time*3–#101/16
Alarm1:
 Once
2:  Daily
0:  #72043
Time
adjustment *3, *91:
 
0:  Manual#226/–
Talking Caller ID–Handset:
1:  
0:  Off
Base unit:
1:  On
0:  #162/47
Handset name––#10446
Key detector
setting *13
– 1: Add new
device
(for  Detector  1 )*14
– 2: Add new
device
(for  Detector 2 )
– 3: Add new
device
(for  Detector 3 )
– 4: Add new
device
(for  Detector 4 )Change name *3Detector1#6561–
Detector2*15#6562*16
Detector3 *15#6563*16...

Sub-menu 1Sub-menu 2SettingsCodeUnit
LCD contrast
(Display contrast)–1-6: Level 1-6 #145/–
Key tone–1: 
0:  Off#165–
Set music on
hold *18–1:
 
0:  Off#167/–
Caller ID edit
(Caller ID number auto edit)–1:  
0:  Off#214/48
Auto talk *19–1:
 On
0:  #20023
Line select
(for landline)–0: 
1:  Line1
2:  Line2#250/16
Set tel lineSet dial mode *31:
 Pulse
2:  #120/16
Set flash  time *3,
 *20
– Line1
– Line20: 900 ms
1:  
2:  600 ms
3:  400 ms
4:  300 ms
5:  250 ms
G : 200 ms
#:  160 ms
6:  110 ms
7:  100 ms
8:...

Main menu:  “Key detector ”*13
Sub-menu 1Sub-menu 2SettingsCodeUnit
Search––#655–
Battery check––
*1 For Line 1
*2 For Line 2
*3 If you program these settings using one of the units, you do not need to program the same item using
another unit.
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 For CELL 3
*8 For CELL 4
*9 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is...

“Daily ”An alarm sounds daily at the set
time. Go to step 4.
3Enter the desired month and date.  a M OK N
4 Set the desired time.
5 *: Select  “AM ” or  “PM ”.  a  M OK N
6 Mb N: Select the desired alarm tone.  a
M SELECT N
R We recommend selecting a different ringer
tone from the one used for outside calls.
7 MSELECT N a  M OFF N
Note:
R To stop the alarm, press  MOFF N or place the
handset on the base unit or charger.
R When the handset is in use, the alarm will not
sound until the handset is in...

Important:
RWe recommend storing 10 digits (including an
area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will be
blocked.
n  From the caller list:
Handset
1 MC N CID
2 Mb N: Select the entry to be blocked.
R To edit the number:  MMENU N a  M b N:
“ Edit ” a  M SELECT N
Press  MEDIT N repeatedly until the phone
number is shown in the 10-digit format. And
then, press  MSAVE N. Go to step 5.
3 MMENU N
4 Mb N:  “Save CID ” a  M SELECT N
5 Mb N:  “Call block ” a  M...

MERASE N a  M b N:  “Yes ” a  M SELECT N a
M EXIT N
Note for handset and base unit:
R When viewing,  “Block w/o num. ”*1
 /  “Block
w/o number ”*2
 is displayed if the blocking
incoming calls without phone number feature is
turned on. To turn the feature off:  MERASE N a
M C N a  M SAVE N a  M OFF N (Handset) or  MEXIT N
(Base unit)
*1 Handset
*2 Base unit
Other programming
Changing the handset name
Each handset can be given a customized name
(“Bob”, “Kitchen”, etc.). This is useful when you
make...

Using Caller ID serviceImportant:
R This unit is Caller ID compatible. To use Caller
ID features, you must subscribe to a Caller ID
service. Contact your service provider/telephone
company for details.
Caller ID features
Handset / Base unit
When an outside call is being received, the caller
information is displayed.
Caller information for the last 50 callers is logged
in the caller list from the most recent call to the
oldest.
R If the unit cannot receive caller information, the
following is displayed:...

Base unit
1 MCID N
2 Press  MC N to search from the most recent call,
or  MD N to search from the oldest call.
3 To call back, press the desired cellular line key
(M CELL 1 N to  MCELL 4 N).
To exit, press  MEXIT N.
n  Using the landline
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M C N CID
Base unit:  M CID N
2 Press  MC N to search from the most recent call,
or  MD N to search from the oldest call.
3 Proceed with the operation for your unit.
Handset:
– To call back, press...

Note:
RPhone numbers from the 4 most recently edited
area codes are automatically edited.
Erasing selected caller information
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M C N CID
Base unit:  M CID N
2 Mb N: Select the desired entry.
3 MERASE N a  M b N:  “Yes ” a  M SELECT N
4 Proceed with the operation for your unit.
Handset:  MOFF N
Base unit:  M EXIT N
Erasing all caller information
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M C N CID
Base...

Copying phonebook from acellular phone (phonebook
transfer)
You can copy phonebook entries from the paired
cellular phones or other cellular phones (not
paired) to the unit’s phonebook. A cellular phone
must be compatible with Bluetooth wireless
technology.
Important:
R If a copied entry has 2 or more phone numbers,
each phone number (6 max.) is stored as a
separate entry with the same name.
R If a phonebook entry includes additional data
such as a picture, that entry may fail to copy to
the base unit....