Panasonic Kx Tg9541 Operating Instructions Manual

IntercomIntercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
R If you receive an outside call while talking on the
intercom, you hear 2 tones.
– To answer the call with the handset, press
MOFF N, then press the corresponding line key.
– To answer the call with the base unit, press MZ N, then press the corresponding line key.
Making an intercom call
Handset
1 MINT N*1
or
M MENU N a  M b N:  “Intercom ” a  M...

PhonebookYou can add 3,000 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook, and assign each phonebook entry to
the desired group ( “Home ”,  “Cell 1 ” to  “Cell
4 ”).
Important:
R All entries can be shared by the base unit and
any registered handset.
R You can copy phonebook entries from a
Bluetooth cellular phone to the unit’s phonebook
(page 50).
Adding entries
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M F N 
 a  M MENU N
Base unit:  MN  a...

2Mb N: Select the desired entry.
R To edit the number:  MMENU N a  M b N:
“ Edit ” a  M SELECT N
Press  MEDIT N repeatedly until the phone
number is shown in the desired format. And
then, press  MSAVE N. Go to step 5.
3 MMENU N
4 Mb N:  “Save CID ” a  M SELECT N
5 Mb N:  “Phonebook ” a  M SELECT N
6 Continue from step 3, “Editing entries”,
page 34.
Base unit
1 MCID N
2 Mb N: Select the desired entry.
R To edit the number, press  MEDIT N
repeatedly until the phone number is shown
in the desired format.
3...

Base unit: MN  a  *
2 To search for the name, enter the first
characters (up to 4) in uppercase (page 32).
RCharacters cannot be entered in lowercase.
R If there is no entry corresponding to the
characters you selected, the next entry is
displayed.
3 MOK N
4 Mb N: Scroll through the phonebook if
necessary.
Searching by group
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M F N 
Base unit:  MN
2 MGROUP N
3 Mb N: Select the group you want to search.  a
M SELECT N
R If you select...

entry, press MD N (Pause) to add pauses after the
number and PIN as necessary (page 22).
R If you have rotary/pulse service, you need to
press  * (TONE) before pressing  MMENU N on
the handset or  M
N on the base unit in step 1
to change the dialing mode temporarily to tone.
When adding entries to the phonebook, we
recommend adding  * (TONE) to the beginning
of phone numbers you wish to chain dial
(page 32).
Speed dial
You can store phone numbers to the base unit and
handset separately:
– Handset: up to...

Erasing an entry
Handset
1 Press and hold the desired speed dial key ( 1
to  0 ). a  M MENU N
2 Mb N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 MOFF N
Base unit
1 MSPEED DIAL N
2 Mb N: Select the desired entry.  a M DETAIL N
3 MERASE N
4 Mb N:  “Yes ” a  M SELECT N
5 MEXIT N
Viewing an entry/Making a call
Handset
n Using a cellular line:
1 Press and hold the desired speed dial key
(1  to  0).
2 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is...

Menu list
To access the features, there are 2 methods.
Handset / Base unit
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R The unit...

Sub-menu 1Sub-menu 2SettingsCodeUnit
GreetingSelect greeting*3<
Greeting1 >
Greeting2
Greeting1&2
Greeting1&Only
Greeting only#3421 *1/54
#3422*2
Record greeting *3
– Greeting1
– Greeting2
– Greeting only–#3021 *1/55
#3022*2
Check greeting
–
Greeting1
– Greeting2
– Greeting only–#3031 *1/56
#3032*2
Pre-recorded *3
(Reset to pre-recorded
greeting)
– Greeting1
– Greeting2
– Greeting only–#3041 *1/55
#3042*2
New message
alert *3By calling
–
On/Off1: On
0:  #3381 *1/57
#3382*2
By calling
–
Alert to–#3381...

Main menu:  “Intercom ”
OperationCodeUnit
Paging the desired unit.#27431
Main menu:  “Bluetooth ”
Sub-menu 1Sub-menu 2SettingsCodeUnit
Link to cell
–1: Add new
device *4
(for CELL 1)
– 2: Add new
device *4
(for CELL 2)
– 3: Add new
device *4
(for CELL 3)
– 4: Add new
device *4
(for CELL 4)Connect *3
/
Disconnect *3–#6251*5/28
#6252*6
#6253*7
#6254*8
Ringer volumeHandset:
0-6:
 Off -6 
Base unit:
0-6:  Off -6 #6281 *5/23
#6282*6
#6283*7
#6284*8
Ringer tone *10<
Tone 4 >#6291*5–
#6292*6
#6293*7
#6294*8...

Sub-menu 1Sub-menu 2SettingsCodeUnit
HeadsetAdd new device*4–#621/51
Connect*3
/
Disconnect *3–#622/52
Pair–#621/51
Unpair–#612/52
SettingsAuto connect *31:
 
2:  3 min
3:  5 min
4:  10 min
0:  Off#632/19
Cell area code *3–#633/20
Cell line select0:
 
1:  Cellphone 1 *4
2:  Cellphone 2 *4
3:  Cellphone 3 *4
4:  Cellphone 4 *4#63420
Set PIN*3<
0000 >#619/21
Main menu:  “Set date & time ”
Sub-menu 1Sub-menu 2SettingsCodeUnit
Date and time*3––#10116
Alarm–1:
 Once
2:  Daily
0:  #72043
Time
adjustment *3,...