Panasonic Kx Tg9541 Operating Instructions Manual

Changing the Bluetooth PIN(Personal Identification Number)
The PIN is used to pair cellular phones to the base
unit. The default PIN is  “0000 ”. To prevent
unauthorized access to this product, we
recommend that you change the PIN, and keep it
confidential.
Program this setting using either the base unit or
one of the handsets.
Important:
R Please make note of your new PIN. The unit
does not reveal the PIN to you. If you forget
your PIN, see page 70.
Handset / Base unit
1 MMENU N#619
R If the unit...

Making cellular callsImportant:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the
corresponding CELL indicator on the base unit
lights up (page 15).
1 Lift the handset and dial the phone number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 20).
Go to step 4.
3 Mb N: Select the desired cellular phone.  a
M SELECT N
4 When you finish talking, press...

Answering calls1 Press  M
N or  MZ N when the unit rings.
R To answer a cellular call, you can also press
MCELL N.
R The called landline is automatically
selected. To change the line selection
mode, see page 16.
R You can also answer the landline call by
pressing  ML1 N or  ML2 N.
2 When you finish talking, press  MOFF N.
Any key answer:  You can answer the call by
pressing any dial key.
Auto talk:  You can answer calls simply by lifting
the handset (page 42).
Temporary ringer off:  You can turn the...

Handset noise reductionThis feature allows you to hear the voice of the
person you are talking to clearly, by reducing the
surrounding noise coming from the other party’s
telephone.
Press  MNOISE REDUCTION N to turn on/off while
talking.
Note:
R Depending on the environment where this
handset is being used, this feature may not be
effective.
R This feature is not available using the
speakerphone.
R When both the  “Equalizer ” setting and noise
reduction are activated, 
 is shown on the
display.
Handset...

To talk with only one caller, press ML1 N or
M L2 N for the party with which you want to
continue talking. To resume both lines,
press  MCONF N.
Conference call with an outside call and an
intercom call
While you are talking with an outside caller, one
more extension can join the conversation and
establish a conference call.
1 During an outside call, press  MMENU N to put
the call on hold.
2 Mb N:  “Intercom ” a  M SELECT N
3 Mb N: Select the desired unit.  a M SELECT N
4 When the paged party answers,...

2Mb N:  “Hold ” a  M SELECT N
3 To make a 2nd call:
Dial the phone number.  a M
N
To answer a 2nd call:
M
N
R To hold the 2nd call:  MMENU N a  M b N:
“ Hold ” a  M SELECT N
4 To hang up the 2nd call and return to the 1st
call (cellular call), press  MOFF N, then press
M CELL N.
Using the other line during a landline
call
You can use the other line in the following ways:
– When a call is being received on the other line
during a conversation, an interrupt tone will be
heard (page 40). You can answer the...

Making cellular callsImportant:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that corresponding
CELL indicator lights up (page 15).
1 Dial the phone number.
2 Press the desired cellular line key ( MCELL 1 N
to  MCELL 4 N).
3 When the other party answers, speak into the
microphone.
4 When you finish talking, press  MZ N.
Note:
R While on a call, you can switch from the base
unit to the handset:
With the call sharing mode on (page 28),
press  MCELL N on the handset.  a M b...

RThe called landline is automatically
selected. To change the line selection
mode, see page 16.
R You can also answer the landline call by
pressing  MLINE 1 N or  MLINE 2 N.
2 Speak into the microphone.
3 When you finish talking, press  MZ N.
Temporary ringer off:  You can turn the ringer off
temporarily by pressing  M
N.
Adjusting the base unit ringer volume
Press  MD N or  MC N repeatedly to select the desired
volume.
Useful features during a call
Hold
1 Press  MHOLD N during an outside call.
R During...

Transferring callsOutside calls can be transferred between 2 people.
1 During an outside call, press  MINTERCOM N.
When 2 or more handsets are registered:
– To page a specific handset, enter the handset number.
– To page all handsets, press  0 or wait for a
few seconds.
2 Wait for the paged party to answer.
RIf paged party does not answer, press
MINTERCOM N to return to the outside call.
3 Press  MZ N.
Conference landline calls
3 people can establish a conference call.
Conference call with 2 outside...

RTo hold the 2nd call, press  MHOLD N.
3 To hang up the 2nd call and return to the 1st
call (landline call), press the corresponding
line key ( MLINE 1 N or  MLINE 2 N).
Making/answering a landline call during a
conversation on a cellular line
1 Press  MHOLD N during a cellular call.
2 To make a 2nd call:
Dial the phone number.  a M Z N
To answer a 2nd call:
M Z N
R To hold the 2nd call, press  MHOLD N.
3 To hang up the 2nd call and return to the 1st
call (cellular call), press  MZ N, then press the...