Panasonic Kx Tg7731 Operating Instructions Manual

The following settings are available:
– “Manual ” (handset only: default): You can
select the desired cellular line when making
a call.
– “Cellular phone 1” (base unit default): CELL 1 is selected.
– “Cellular phone 2”: CELL 2 is selected.
1 MMENU N
2 For handset:  #634
For base unit *1
: #*634
3 Mb N: Select the desired setting.
4 MSAVE N a  M OFF N
*1 KX-TG7741 series: page 3
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
You need to add your area code when...

Making cellular callsImportant:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the CELL
1 or CELL 2 indicator lights green (page 16).
1 Lift the handset and dial the phone
number.
R To correct a digit, press  MCLEAR N.
2 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is registered.
– a specific line is set to make cellular calls (page 20).
Go to step 4.
3 Mb N: Select the desired cellular phone.  a
M SELECT N
4 When you finish talking, press  MOFF N or...

and/or PIN in the phonebook, a pause is also
needed (page 32).
Example:  If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a  M PAUSE N
2 Dial the phone number.  a M
N
Note:
R A 3.5 second pause is inserted each time
M PAUSE N is pressed.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press  M
N or  MN
when the unit rings.
R To answer a cellular call, you can also
press  MCELL N.
R You can also answer the...

MuteWhile mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1 Press  MMUTE N during conversation.
R M MUTE N flashes.
2 To return to the conversation, press
M MUTE N again.
Note:
R M MUTE N is a soft key visible on the handset
display during a call.
Flash for landline calls
M FLASH N allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 38.
For...

nWhile another unit is on a cellular call:
1 To join the conversation, press
M CELL N.
R You can join the conversation when:
– only 1 cellular phone is registered.
– the line is set to make cellular calls (page 20).
2 Mb N: Select the desired cellular phone.
a  M SELECT N
n While another unit is on a landline call:
To join the conversation, press  M
N.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.  (3-way conference)
R To prevent other users from...

3To make a 2nd call:
Dial the phone number.  a MN
To answer a 2nd call:
M
N
R To hold the 2nd call:  MMENU N a  M b N:
“ Hold ” a  M SELECT N
4 To hang up the 2nd call and return to the
1st call (cellular call), press  MOFF N, then
press  MCELL N.
26For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Handset   

Making cellular calls
Available for:
KX-TG7741 series (page 3)
1 Press  MCELL 1 N or  MCELL 2 N.
2 Dial the phone number.
3 When the other party answers, speak into
the microphone.
R Speak alternately with the other party.
4 When you finish talking, press
M SP-PHONE N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 29),
press  MCELL N on the handset.  a M b N:
Select the...

Adjusting the base unit ringer volumen While the base unit is ringing for an
incoming call:
Press  Mj N or  Mk N repeatedly to select the
desired volume.
R To turn the ringer off, press and hold
M k N until the unit beeps.
n Programming the volume beforehand:
1 To change the cellular line ringer
volume:
For CELL 1:  MMENU N#*6281
For CELL 2:  MMENU N#*6282
To change the landline ringer
volume:
M MENU N#*160
2 Mb N: Select the desired volume.
3 MSAVE N a  M OFF N
Useful features during a
call
Hold This...

Temporary tone dialing forlandline calls (for rotary/pulse
service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
Press  * (TONE) before entering access
numbers which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press  MCELL 1 N or  MCELL
2 N.
– for the landline press  MSP-PHONE N....

Shared phonebookThe shared phonebook allows you to make
calls without having to dial manually. Any
handset registered to the base unit can use
the shared phonebook. You can add 3,050
names and phone numbers to the shared
phonebook, and assign each phonebook entry
to the desired group ( “Home ”,  “Cell 1 ”,
“ Cell 2 ”).
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group ringer
tone features (page 44).
R You can copy phonebook entries from a...