Panasonic Kx Tg7731 Operating Instructions Manual

– The message indicator on the handsetflashes slowly if the message alert feature
is turned on (page 53).
1 To listen to new messages:
M MENU N#323
To listen to all messages:
M MENU N#324
2 When finished, press  MOFF N.
Note:
R To switch to the receiver, press  M
N.
Operating the answering system
M MENU N a  M b N:  “Answering device ” a
M SELECT N
KeyOperationMj N or  M k NAdjust the receiver/speaker
volume
(during playback)1  or  MF NRepeat message
(during playback) *12
 or  ME NSkip message
(during...

Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1 MMENU N#306
2 Enter the desired 3-digit remote access
code.
3 MSAVE N a  M OFF N
Deactivating remote operation
Press  * in step 2 on “Remote access code”,
page 51.
R The entered remote access code is deleted.
Using the answering system
remotely
1 Dial your landline phone number from a
touch-tone phone.
2 After the greeting message starts, enter
your remote access code.
3 Follow the voice...

Answering system settings
Number of rings before the unitanswers a call
You can change the number of times the
phone rings  “Ring count ” before the unit
answers calls. You can select 2 to 7 rings, or
“ Toll saver ”.
The default setting is  “4 rings ”.
“ Toll saver ”: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 51), you...

Note:
R While message alert is on, battery
operating time is shortened (page 12).54For assistance, please visit http://www.panasonic.com/help
Answering System for Landline 

Voice mail service forlandline
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/
telephone company, not your telephone.
Please contact your service provider/
telephone company for details of this service.
Important:
R To...

Listening to voice mail messages
The unit lets you know that you have new
voice mail messages in the following ways:
– “New Voice Mail ” is displayed on the
handset if message indication service is
available.
– The message indicator on the handset flashes slowly if the message alert feature
is turned on (“Message alert”, page 53).
Handset
1 MMENU N#330
R The speakerphone turns on.
2 Follow the pre-recorded instructions.
3 When finished, press  MOFF N.
Note:
R If the handset still indicate there are new...

IntercomIntercom calls can be made:
– between handsets
– between a handset and the base unit *1
*1 KX-TG7741 series: page 3
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones.
– To answer the call with the handset,
press  MOFF N, then press  M
N.
– To answer the call with the base unit,
press  MSP-PHONE N 2 times. *1
*1 KX-TG7741 series: page 3
Making an intercom call
Handset
1 MMENU N a  M INT N
2 Mb N:...

Transferring calls,conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit *1
*1 KX-TG7741 series: page 3
Handset
1 During an outside call, press  MINT N to put
the call on hold.
2 Mb N: Select  the  desired  unit.  a  M SELECT N
3 Wait for the paged party to answer.
R If the paged party does not answer,
press  M
N to return to the outside call.
4 To complete the transfer:
Press  MOFF N.
R The...

Wall mountingNote:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
1 Thread the AC adaptor cord and
telephone line cord through the hole in
the wall mounting adaptor in the direction
of the arrow.
2 Tuck the telephone line cord inside the
wall mounting adaptor ( A). Connect the
AC adaptor cord and telephone line cord
( B ).
3 Insert the hooks on the wall mounting
adaptor into holes  and  on the base
unit.
4 Adjust the adaptor to hold the base...

5Mount the unit on a wall then slide down
to secure in place.To remove the wall mounting adaptor
While pushing down the release levers ( A),
remove the adaptor ( B).
Charger
Drive the screws (not supplied) into the wall.
60For assistance, please visit http://www.panasonic.com/help
Useful InformationAC adaptor cord
83 mm 
(31/4 inches)
or
102 mm 
(4 inches)
1
2
Wall phone plate
83 mm
(3 1/4 inches)102 mm
(4 inches)
2 1 AA
B 25.4 mm
(1 inch)
Screw
s
Hooks