Panasonic Kx Tg7731 Operating Instructions Manual

Finding and calling from a
phonebook entry
Scrolling through all entries
n  Using a cellular line
1 M
N
2 Mb N: Select the desired entry.
3 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is registered.
– a specific line is set to make cellular calls (page 20).
4 Mb N: Select the desired cellular phone.  a
M SELECT N
n  Using the landline
1 M
N
2 Mb N: Select the desired entry.
3 M
N
Searching by first character
1 M
N
2 Press the dial key ( 0 – 9  or  #) which
contains the character you...

2Mb N:  “Yes ” a  M SELECT N
3 MOFF N
Erasing all entries in a group
1 M
N a  M MENU N
2 Mb N:  “Erase all ” a  M SELECT N
3 Mb N: Select the desired group.  a
M SELECT N
4 Mb N:  “Yes ” a  M SELECT N
5 Mb N:  “Yes ” a  M SELECT N
6 MOFF N
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1...

Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the...

Sub-menu 1Sub-menu 2SettingsCodeSettingsRing count*12–7:
 2-7 rings
< 4 rings >
0:  Toll saver#21153Recording time *11:
 1 min
3:  
0:  Greeting only *2#30553Remote code*1<
111 >#30651Screen call1:   0:  Off#31049Answer on *1––#32749Answer off *1––#32849
Main menu:  “
V.M. access ”*3
 (V.M.: Voice mail)
OperationCodeListening to voice mail messages.#33056
Main menu:  “ Intercom ”
OperationCodePaging the desired unit.#2745734For assistance, please visit http://www.panasonic.com/help
Programming      

Main menu:  “Bluetooth ”Sub-menu 1Sub-menu 2SettingsCodeLink to cell
– 1: Add new
device *4
(for CELL 1)
– 2: Add new
device *4
(for CELL 2)Connect *1
/
Disconnect *1–#6251*520#6252*6Ringer volume
– Handset0–6:  Off–6 #6281 *523#6282*6Ringer volume
– Base unit *10–6: 
Off–6 #G 6281 *528#
G 6282 *6Ringer tone *7, *81–5:
 Tone 1-5
< Tone 2 >*5
< Tone 4 >*6
6–0:  Melody 1-5#6291 *5–#6292*6Select unit to
ring *11–6:
 Handset 1-6
G : < All >#6271 *519#6272*6Ring as cell
(limited) *11:
 
2:  On (without...

Sub-menu 1Sub-menu 2SettingsCodeSettingsAuto connect*11:
 
2:  3 min
3:  5 min
4:  10 min
0:  Off#63219Cell area code *1–#63321Cell line only
mode *11:
 On   0:  #15720Cell line select
– Handset1: Cellphone 1 *4
2:  Cellphone 2 *4
0:  #63420Cell line select
– Base unit *1, *91:
 Cellphone 1 *4
2:  Cellphone 2 *4#
G 634Set PIN *1<
0000 >#61921Deregistration *2––#13421
Main menu:  “
Set date & time ”
Sub-menu 1Sub-menu 2SettingsCodeDate and time*1––#10117Alarm–1:
 Once
2:  Daily
0:  #72040Time
adjustment...

Main menu:  “Initial setting ”Sub-menu 1Sub-menu 2SettingsCodeRinger settingRinger volume
– Handset *30–7:
 Off–7 #16023Ringer volume
– Base unit *1, *30–6:
 Off–6 #G 16028Ringer tone *3, *7, *8, *11
(Handset)1–5:  Tone 1-5
< Tone 1 >
6–0:  Melody 1-5#161–Interrupt tone
– Handset *121:
   0:  Off#20125Interrupt tone
– Base unit *1, *9, *121:
   0:  Off# G 20129Silent mode
– On/Off1: On   0:  #23840Silent mode
– Start/End#23740Set date & timeDate and time *1–#10117Alarm1:
 Once
2:  Daily
0:  #72040Time...

Sub-menu 1Sub-menu 2SettingsCodeCaller ID edit
(Caller ID number auto
edit)–1:    0:  Off#21444Auto talk *14–1:
 On   0:  #20023Set tel line *3Set dial mode *11:
 Pulse
2:  #12017Set flash time *1, *150:
 900 ms
1:  
2:  600 ms
3:  400 ms
4:  300 ms
5:  250 ms
G : 200 ms
#:  160 ms
6:  110 ms
7:  100 ms
8:  90 ms
9:  80 ms#12124Set line mode *1, *161:
 A   2:  #122–Call sharing *1–1: 
  0:  Off#19424,
29RegistrationRegister handset–#13042Deregistration *2–#13142Change languageDisplay1: 

2:...

*8 The preset melodies in this product are used with permission of © 2009 Copyrights VisionInc.
*9 KX-TG7741 series: page 3
*10 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select  “Caller ID auto ”. To turn this feature off, select
“ Manual ”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 17).
*11 If you subscribe to a distinctive ring service (such...

Special programming
AlarmAn alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R Set the date and time beforehand
(page 17).
1 MMENU N#720
2 Mb N: Select the desired alarm option.  a
M SELECT N
OffTurns alarm off. Go to step 7.OnceAn alarm sounds once at the
set time.DailyAn alarm sounds daily at the
set time. Go to step 4.
3 Enter the desired month and date.  a
M OK N
4 Set the desired time.
5 MAM/PM N: Select  “AM ” or  “PM ”.  a  M OK N
6 Mb N:...