Panasonic Kx Tg1000n Operating Instructions Manual

61
Advanced Operation
Conference
While you are talking with an outside caller, up to 2 other parties can \
join 
the conversation. 
Ex. 1 
While the base unit is engaged on an external call, up to 2 handset user\
s
can join the conversation. 
Ex. 2 
While a handset is engaged on an external call, up to 2 units (a handse\
t
and base unit) can join the conversation. 
To join a conversation; 
Using the handset, press  or 
(SP-PHON\f).
OR 
Using the base unit, press 
(DIGITAL!SP-PHON\f). 

62
Wall Mounting
This unit can be mounted on a wall phone plate.
1
Connect the AC adaptor.
2
#Fit the tabs on the wall 
mounting adaptor into the
holes on the base unit.
$ Push them in the direction
of the arrow.
To Power 
Outlet 

63
Useful Information
4
To charge the handset battery: 
Place the handset on the base unit
as shown.
•The CHARGE indicator lights.
CHARGE 
Indicator
3
Connect the telephone line 
cord. Mount the unit, then
slide down. 

64
Optional Spare Battery
2
Install a spare battery in 
the base unit. 
#Place a spare battery 
in the compartment
with the charge
contacts facing up.
$ Push the compartment
closed firmly.
•The CHARGE indicator
flashes for 3 seconds and 
the light goes out.
An optional spare battery works as emergency power during a power 
failure. The fully charged spare battery provides the base unit to recei\
ve
calls from the handset for up to 5 hours. Moreover, when the handset
battery needs charging, replace it with...

65
Useful Information
Charge Contacts
Charge  
Contacts
•If  “LOW BATTERY ” is displayed and/or  “” fl ashes after being fully charged,
replace the battery with a new Panasonic battery. 
H
2
Replace the handset battery with 
the spare battery in the base unit. 
# Remove the spare battery.
$ Insert the handset battery in the 
compartment with the charge
contacts facing up.
3
Install the spare
battery in the
handset with the
charge contacts
facing down.
Replacing the handset battery with the spare battery...

66
Using the Belt Clip
You can hang the handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
Using an Optional Headset
Plugging an optional headset into the handset allows a hands-free phone 
conversation. Please use only the Panasonic KX-TCA88 headset. To order
call the accessories telephone number on page 2.
Connecting the headset to the handset
Open the headset jack cover, and connect the headset to the headset
jack as shown.
Headset Jack
H
When the...

67
Useful Information
Adding Another Phone
If the optional spare battery has been discharged during a power failure\
, 
the unit will not work. If required, you can connect a standard telephon\
e
on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
T-Adaptor (KX-J66)
Single-Line  
Telephone Jack
Telephone 
Line Cord
Standard Telephone 

68
If the Following Appear…
If the unit detects a problem, one of the following messages will be 
displayed on the display.The battery needs to be charged. Place the
handset on the base unit to charge the battery
(p. 11). 
You are too far from the base unit. Move closer 
and try again. 
If “SEARCHING FOR BASE ” is still displayed,
place the handset on the base unit and unplug
the AC adaptor to reset. Plug in, and try again.
Or, re-install the handset battery and place the
handset on the base unit (p....

69
Useful Information
PHONEBOOK ISFULL
PauseMEMMENU
0
LINE
IN USE
RDLMEMMENU
01
THIS IS  NOT AN
EXTERNAL CALL
VOLMUTEHOLD
EXTENSION IN USE
RDLMEMMENU
The redial list is empty. 
The display will be shown when the unit is 
engaged in an external call. (Ex. Base Unit is on
an external call.)
In this case, you cannot make an external call.
Wait until this message disappears. 
The display will be shown when a parallel 
connected telephone is engaged in an external
call.
(INTERC\bM)was pressed while you are in...

70
Before Requesting Help
Problem
“SEARCHING FOR BASE ” is
displayed and an alarm tone 
sounds.
The unit does not work.
When you try to make a call, 
the other voice is heard.
You cannot dial.
Static, sound cuts in/out, 
fades. Interference from
other electrical units.
The handset does not ring.
Remedy
• You are too far from the base unit. Move 
closer and try again.
• Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.
• Re-install the handset battery and...