Panasonic Kx Tda50 User Manual

							4.1 Troubleshooting
User Manual 141
My proprietary telephone does not have 
a feature button.Some models do not have the feature button.
 Change a flexible button to the desired 
button. (  3.1.3 Customizing the Buttons)
 Enter the specified feature number instead 
of the feature button. (  1.1.1 Before 
Operating the Telephones)
A reorder tone is audible or Restricted 
is displayed.The telephone is locked.
 Unlock your telephone. (  1.5.3 
Extension Lock, 2.1.1 Extension Control)
Toll restriction is activated.
 Consult your manager or dealer. 
An account code is required. (  1.2.6 
Calling without Restrictions, Account Code 
Entry in 1.2.1 Basic Calling)
I cannot make an outside call using the 
One-touch Dialing button or speed 
dialing.A line access number was not stored.
 A line access number is required for outside 
calls. (  1.2.1 Basic Calling, 3.1.3 
Customizing the Buttons)
I cannot remember the feature numbers.
 Ask your dealer to change the feature 
numbers for easier use.
While talking to an outside party, the line 
is disconnected.The time limit has run out. ( 1.4.1 Call 
Transfer, 1.4.5 Multiple Party Conversation)
 Consult your dealer to extend the time, if 
necessary.
Redialing does not function.The stored number was more than 32 digits 
or an extension number. (  1.2.3 Redial)
The personal computer and fax machine 
communication failed.An indication tone may have interrupted 
communication. (  1.7.8 Data Line 
Security)
I cannot send a call waiting tone to the 
dialed extension.The other party has not set the Call Waiting 
feature.
(  Call Waiting, 1.4.4 Call Waiting, 1.7.3 Call 
Waiting/Off-hook Call Announcement (OHCA)/
Whisper OHCA)
The other party has set Data Line Security.
(  1.7.8 Data Line Security)
I forgot the password.Ask the manager to assist you.
(  2.1.1 Extension Control)
The background music started suddenly.
 Turn off the music.
(  1.7.7 Background Music (BGM), 2.1.4 
External Background Music (BGM)) Problem Remedy 
						

							4.1 Troubleshooting
142 User Manual
I do not want to display a number which 
is stored in memory. Conceal the number.
(  Storing Names and Numbers, 3.1.3 
Customizing the Buttons)
I want to confirm my extension number.
(  Your Extension Number in 1.1.1 Before 
Operating the Telephones)
The date and time are not correct.Set the date and time by system 
programming. (  Date & Time [000] in 3.3.2 
System Programming)
The display is not shown well.
 Change the Display contrast level.
(  3.1.2 Settings on the Programming Mode)
I want to distinguish the tones.
(  To distinguish the ringing tones for each 
CO, INTERCOM or G-DN button (Digital 
proprietary telephone only), 3.1.3 Customizing 
the Buttons)
The MESSAGE button light lit.Another extension left you a message 
waiting indication while you were on the 
phone or away from your desk. Problem Remedy 
						

							4.2 Feature Number Table
User Manual 143
4.2 Feature Number Table
4.2.1 Feature Number Table
Numbers listed below are the default settings. There are flexible feature numbers and fixed feature 
numbers. If you change the flexible feature numbers, fill in your assigned numbers (new) in the list for 
future reference.
Feature (While dial tone is heard)Default
(New)Additional digits
1.2.1 Basic Calling
Operator Call  0
()
Automatic Line Access  9
()outside phone no.
CO Line Group Access  8
()CO line group no. (2 digits) + outside phone 
no.
TIE Line Access  7
()private phone no.
Account Code Entry 
49
()account code + # + outside phone no.
1.2.2 Easy Dialing
Personal Speed Dialing
– To  s t o r e
30
()personal speed dialing no. (2 digits) + 
outside phone no. + #
– To  d i a l
() + personal speed dialing no. (2 digits)
System Speed Dialing
– To  d i a l
()system speed dialing no. (3 digits)
Hot Line
740
()
– To store 2 + phone no. + #
– To  s e t 1
– To  c a n c e l 0
1.2.3 Redial
Last Number Redial #
() 
						

							4.2 Feature Number Table
144 User Manual
1.2.4 When the Dialed Line is Busy or There is 
No Answer
Automatic Callback Busy Cancel
46
()
Message Waiting
70
()
For a caller
– To leave/cancel 1/0 + extension no.
For a called extension
– To call back 2
– To clear 0 + your extension no.
1.2.6 Calling without Restrictions
Remote COS Access
47
()extension no. + extension PIN + phone no.
To call (Verified Code Entry)
 + verified code + verified code PIN + 
phone no.
1.2.7 Direct Inward System Access (DISA)
Calling through DISA
– To an extension 
(In All Security Mode only)your extension no./(  + verified code) + 
extension PIN/verified code PIN + extension 
no.
– To an outside party 
(In Trunk Security Mode/All Security Mode 
only)your extension no./(  + verified code) + 
extension PIN/verified code PIN + outside 
phone no.
1.2.8  Remote  Setting your extension no. + extension PIN + feature 
no.
– From another extension
– Through DISA
1.3.3 Call Pickup
Call Pickup
– Group
40
()group no. (2 digits)
– Directed
41
()extension no.
Call Pickup Deny
720
()
– To  d e n y 1
– To allow 0Feature (While dial tone is heard)Default
(New)Additional digits 
						

							4.2 Feature Number Table
User Manual 145
1.3.4 Trunk Answer From Any Station (TAFAS)
– Calls through an external speaker
42
()1
1.4.2 Call Hold
Call Hold/Call Hold Retrieve
50
()
Call Hold Retrieve
– Specified with a held line number
53
()CO line no. which is held (3 digits)
– Specified with a holding extension number
51
()extension no. which has a held call
Call Park
52
()
– To  s e t
parking zone no. (2 digits)/
– To retrieve stored parking zone no. (2 digits)
1.4.4 Call Waiting
Answering Call Waiting in the PBX
50
()
Answering Call Waiting from the Telephone 
Company60
()
1.5.1 Call Forwarding
Call Forwarding (FWD)/
1.7.2 Do Not Disturb (DND)
– Both Calls
710
()0 (Cancel)/
– Outside Calls
711
()1 (Do Not Disturb [DND])/
– Intercom Calls
712
()2 (All calls) + phone no. + #/
3 (Busy) + phone no. + #/
4 (No Answer) + phone no. + #/
5 (Busy/No Answer) + phone no. + #/
7 (Follow Me) + your extension no./
8 (Follow Me Cancel) + your extension no. Feature (While dial tone is heard)Default
(New)Additional digits 
						

							4.2 Feature Number Table
146 User Manual
–To set the timer for No Answer and 
Busy/No Answer713
()00-99 (second)
Call Forwarding (FWD) for your Incoming Call 
Distribution Group
– Both Calls
714
()1 (Set) + ICD Group extension no. + phone 
no. + #/0 (Cancel) + ICD Group extension 
no.
– Outside Calls
715
()
– Intercom Calls
716
()
1.5.2 Absent Message
750
()
– To set 1-9 (+ parameter) + #
– To cancel 0
1.5.3 Extension Lock
77
()
– To  l o c k 1
– To unlock 0 + extension PIN
1.6.1 Paging
Group Paging
33
()paging group no. (2 digits)
1.6.2 Answering/Denying a Paging 
Announcement
– To answer
43
()
– To  d e n y
721
()1
– To allow 0
1.7.1 Timed Reminder
760
()
–  To  set 12H: 1 + time (hour/minute) + 0 (AM)/1 (PM) 
+ 0 (once)/1 (daily)
24H: 1 + time (hour/minute) + 0 (once)/1 
(daily)
– To cancel 0
1.7.3 Call Waiting/Off-hook Call Announcement 
(OHCA)/Whisper OHCA
– For intercom calls
(No call/Tone/OHCA/Whisper OHCA)731
()0 (No call)/1 (Tone)/2 (OHCA)/3 (Whisper 
OHCA)
– For outside calls
(No tone/Tone)732
()0 (No tone)/1 (Tone) Feature (While dial tone is heard)Default
(New)Additional digits 
						

							4.2 Feature Number Table
User Manual 147
1.7.4 Connected Line Identification Restriction 
(COLR)70
()
– To  s h o w 0
– To prevent 1
1.7.5 Calling Line Identification Restriction 
(CLIR)71
()
– To  s h o w 0
– To prevent 1
1.7.6 Executive Busy Override Deny
733
()
– To prevent 1
– To  a l l o w 0
1.7.7 Background Music (BGM)
751
()
– To  s e t 1
– To  c a n c e l 0
1.7.8 Data Line Security
730
()
– To  s e t 1
– To  c a n c e l 0
1.7.10 Paralleled Telephone
39
()
– Ring 1
– No Ring 0
1.7.11 Wireless XDP Parallel Mode
48
()
– To set  1 + paired wired extension no.
– To  c a n c e l 0
1.7.12 Extension Feature Clear
790
()
1.8.1 Log-in/Log-out, Wrap-up
Log-in
736
()1 + ICD Group extension no./
Log-out
0 + ICD Group extension no./
To enter/leave the Not Ready mode
735
()1 (Not Ready)/0 (Ready)
*
2 1.8.2 Incoming Call Distribution Group 
Monitor739
()ICD Group extension no. Feature (While dial tone is heard)Default
(New)Additional digits 
						

							4.2 Feature Number Table
148 User Manual
1.9.1 Doorphone/Door Opener
Doorphone Call
31
()doorphone no. (2 digits)
Door Open
55
()doorphone no. (2 digits)
1.9.2 Host PBX
External Feature Access (EFA)
60
()service code
1.9.3 Voice Processing System
Call Forwarding to Voice Mail (Voice Mail 
Integration)
– Both Calls
710
()0 (Cancel)/
– Outside Calls
711
()2 (All Calls)/
– Intercom Calls
712
()3 (Busy)/
4 (No Answer)/
5 (Busy/No Answer)
+ voice mail floating extension no. + #
1.10.1 Walking Extension
727
()your previous extension no. + extension PIN
2.1.1 Extension Control
*
1 Remote Extension Lock
– To  u n l o c k
782
()extension no.
– To  l o c k
783
()extension no.
*
1 2.1.2 Time Service Mode Control
780
()
– Day/Night/Lunch/Break 0/1/2/3
*
1 2.1.4 External Background Music (BGM)
35
()
– To play 11
– To  s t o p 1 0Feature (While dial tone is heard)Default
(New)Additional digits 
						

							4.2 Feature Number Table
User Manual 149
*1 2.1.5 Outgoing Messages (OGM)
36
()
– To record 1 + OGM floating extension no.
– To play back 2 + OGM floating extension no.
– To record from an external BGM (MOH) 
port31 + OGM floating extension no.
– To clear 0 + OGM floating extension no.
3.1.1 Personal Programming
Extension PIN (Personal Identification Number)
799
()
–  To  set 1 + extension PIN + # + same extension PIN 
+ #
– To cancel 0 + stored extension PIN
*
1
*2
: Manager only
: Supervisor only
Feature (While busy, DND or call tone is heard)  Default
1.2.4 When the Dialed Line is Busy or There is No Answer
Call Waiting 1
DND Override
Executive Busy Override 3
Message Waiting
– To  l e a v e 4
Call Monitor 5
Automatic Callback Busy 6
1.2.5 Alternate Calling—Ring/Voice
Feature (While dialing or talking)Fixed 
Number 
1.4.5 Multiple Par ty Conversation
Conference 3
1.9.1 Doorphone/Door Opener
From any extension while talking to the doorphone 5Feature (While dial tone is heard)Default
(New)Additional digits 
						

							4.3 Tone
150 User Manual
4.3 Tone
4.3.1 Tone
While on-hook
When going off-hook
Ring Tones
The following tones are 
programmable allowing 
recognition of call type 
(Outside, Intercom or 
Doorphone).
Tone 1
Tone 2
Tone 3
Tone 4
Dial Tones
Tone 1
Normal
1 s
1 s